Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
National Conference on Information Communication & Intelligent Systems-2023(NCICIS)
Institution of Electronics & Telecommunication Engineers (IETE) - Kochi Centre and Department of Electronics Toc H Institute of Science and Technology , Arakkunnam, Ernakulum are jointly organizing the “National Conference on Information Communication & Intelligent Systems-2023(NCICIS)” at Toc H Institute of Science and Technology Kochi, during May 18-19, 2023. We invite the authors to submit their manuscript / research papers that have not been published elsewhere in any form/abridged or otherwise. Article submitted to this conference, once accepted, registered and presented will be further sent to any one of the following journals:
•International Journal of Scientific Research in Science and Technology
•International Journal of Scientific Research in Science, Engineering and Technology
The editorial team of the journals will follow a paper-selection process and the papers will be peer reviewed. If accepted, the article will be published in the journal according to the subject area. Proceeding with ISBN will be released after the conference, which will contain the registered papers. The last date for manuscript submission is 4th May 2023. The conference brochure and conference website link are given for your further reference.
Conference website: https://sites.google.com/view/ncicis2023/home?authuser=0
Conference at SCMS SCHOOL OF ENGINEERING AND TECHNOLOGY
International Conference On Power Electronics Computing And Automation 2022: 14 -15 July
PECA 2022 will be held at SSET Karukutty, Kerala India over two days. The objective of the conference is to update the advancements and innovations relevant to the field of Electrical & Electronics Engineering. Scope of the conference is to bring together the global research community, students, teachers and practising engineers to a single platform to share their knowledge.
Scope of the Conference includes, but are not limited to
Ø Power Electronics and Drives
Ø Industrial Instrumentation
Ø Automation and Control
Ø Renewable Energy System
Ø Power System
Ø Communication
Ø Smart Grid Technologies and Systems
Ø Robotics
Ø Artificial Intelligence
Ø IoT
Ø Robotics
Ø Computing
Paper Submission Link https://easychair.org/conferences/?conf=peca2022
Conference Website https://sites.google.com/scmsgroup.org/peca/home
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
KTU sponsored Five days FDP on "Deep Learning for Signal Processing - Basics to Implementation"
The Department of Electronics and Communication Engineering, Sahrdaya College of Engineering and Technology, Kodakara, Kerala is organizing a KTU sponsored Five days FDP on ?Deep Learning for Signal Processing - Basics to Implementation? from 26th to 30th April 2021.
* No registration fee
* Resource persons are from NITs, SCET and the AI and ML Industry.
* Applicable only for faculty members from KTU affiliated colleges.
* The number of participants is limited to 60 and the participants will be selected on a First come First serve basis.
Link for registration: tinyurl.com/fdpsahrdaya
Last Date for Registration?19-04-2021
Seminar at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
KTU sponsored FDP (Online) "Biosensors in Point- of- Care Diagnostics:Strategies and Implementation"
Greetings from Sahrdaya College of Engineering & Technology!
We are extremely happy to invite all of you to the KTU sponsored FDP (Online) " Biosensors in Point- of- Care Diagnostics: Strategies and Implementation" jointly organized by the Department of Biotechnology and Department of Biomedical Engineering, Sahrdaya College of Engineering and Technology.
Date: 19th-21st April 2021
Platform: Google meet
Kindly complete the registration for the E-Conference by filling out the form provided in the given link: -
https://forms.gle/uL5vFyUaZNoH5GTr7
Last date for registration is 31st March 2021.
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Bodhi
A seminar by Sri. K M Abdul Jamal(Rtd. Excise Inspector) about the menace of Narcotics in teenagers organised Bodhi, the Anti Narcotic Club of MESCET Kunnukara.
Published onMar2021
Conference at COLLEGE OF ENGINEERING VADAKARA
National Conference on Advances in ComputingCommunication Signals Energyand TechnologyACCSET’21
We are pleased to inform you that the College of Engineering Vadakara, Calicut, Kerala, India is organizing an Online National Conference on Advances in Computing Communication Signals Energy and Technology, ACCSET'21, scheduled to be held on 26th and 27th of May 2021. The conference is intended to provide a forum for researchers and engineers from broad fields of electrical, electronics, instrumentation, computer and information technology to share ideas and disseminate research findings in emerging areas of signal processing, communication, power, computation and other fields of technology. The technical program is proposed to have keynote lectures and technical sessions.
TEQIP II sponsored 3 day Online FDP on "Recent trends in Image Processing"
Department of Electronics and Communication Engineering is organizing a TEQIP II sponsored 3 day Online FDP on *"Recent trends in Image Processing"* from 25th to 27th March 2021. This FDP covers concepts of image processing, machine learning and deep learning technique in image processing and hyper spectral imaging techniques.
Resource Person from NIT Trichy and NIT Surathkal
For further information, Please Contact :
Prapu Premanath 9846700144
Ajmal Mohammed 9037624782
*REGISTRATION LINK:*
https://forms.gle/D51CCG6BtKRHJnAn8
Last date of Registration : 18/03/2021
Published onMar2021
Work Shop at MOUNT ZION COLLEGE OF ENGINEERING
HIGH PERFORMANCE COMPUTING”- Tools & Technologies for Engineering Applications
Dear Sir/Madam,
Greetings from Department of *Applied Electronics and Instrumentation Engineering*,
*Mount Zion College of Engineering, Kadammanitta, Pathanamthitta.*
It is our pleasure to inform you that our Department is organising a KTU Sponsored Five Day Online Faculty Development Programme on *“HIGH PERFORMANCE COMPUTING”- Tools & Technologies for Engineering Applications* from 22nd March to 26th March 2021.
Our FDP is intended to provide opportunities for Faculty Members for upgrading their knowledge and acquire skills in the fundamentals of High-Performance Computing, Architectures, and its applications in the domains such as Industry 4.0, Big Data Processing, Automation, Finance, Deep Learning, Biomedical Applications etc.
Platform: Google Meet
Registration is free and E-certificates will be provided after the successful completion of FDP.
Webpage: www.aeimzc.in
Registration Link:
https://forms.gle/ucQf9v5TWh7UWu7s9
Requesting your sincere support for the success of the program.
Regards,
Coordinators:
Dr. Mathew K
_Professor & Principal, MZC_
Ms. Siji A. Thomas
_Assistant Professor, Dept. of AEI, MZC_
Please donot hesitate to contact us for queries.
Contact: 7902864236
Email: academicsmzceae@gmail.com
_Stay Safe!_
Published onMar2021
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Women`s Cell NIRUPA
Webinar on Women Safety and Domestic Violence in connection with International Women`s Day by Adv. Anna Linda Eden.
Postponed to 15/3/21.
Published onMar2021
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
KTU Sponsored One week Online FDP on Power System Security & Internet of Things
Department of Electrical and Electronics Engineering of Sree Buddha College of Engineering, Pattoor P.O, Alappuzha is organizing a KTU Sponsored One week Online Faculty Development Programme on
*Power System Security & Internet of Things: A Future Energy Scenario.*
Eminent experts from reputed institutions and Industries are handling the sessions and the target audience is faculties, research scholars, industrialists and PG students.
*Date* : 15th to 19th March, 2021
*Time* : 09:30 am to 4:00 pm
*Platform* : Google Meet
Last Date of Registration : *12th March 2021*
Register Now @ https://forms.gle/3q8NmWjm7D6Zgnmm7
Greetings from College of Engineering Kidangoor, Kottayam, Under CAPE, Govt of KERALA!!
We are happy to announce that Department of Computer science and Engineering is organizing a TEQIP II sponsored 5 day Online FDP on "Data Analytics - A Hands on Experience" from 15th to 19th March 2021. This FDP emphasis on hands on sessions that covers data analysis and visualization tools including SAS, Tableu and Excel.
REGISTRATION LINK:
bit.ly/dataanalyticshandson
Last date of Registration : 12/03/21
Registration is free & E - Certificate will be issued to all eligible participants
Five Days online FDP on "Modern Trends in Power Electronics"
We are happy to inform you that College of Engineering Perumon, Department of Electrical and Electronics Engineering is organizing a TEQIP II sponsored Five-Days Online Faculty Development Programme on "Modern Trends in Power Electronics ? scheduled to be held from 8 th to 12 th March-2021.
Eminent Experts from reputed institutions and industries are handling the sessions and the target audience are faculties, research scholars, industrialists and PG students.
Kindly find the details of the program in the attached brochure.
Registration Link:
https://forms.gle/7gYySZM2xkfSP4my9
Date: - 8th to 12th March-2021
Time: 9.30 AM - 1.00 PM
There shall be NO Registration Fees
Work Shop at MEA ENGINEERING COLLEGE, PERINTHALMANNA
5 day Online FDP on Business Analytics and Data Science
The MEA Engineering College, Department of Computer Science & Engineering and IT are going to organize the ?5 day KTU Sponsored Online Faculty Development Programme on ?Business Analytics and Data Science? from 15.03.2021 to 19.03.2021. This FDP will be very useful for the faculty members under KTU affiliated colleges. Upon receipt of registration form, the applicants will be selected on first come first serve basis
5 Day Online FDP on 'Block Chain Technology and Cyber Security'
Department of Computer Science and Engineering is organizing a TEQIP II sponsored 5 day Online FDP on *"BlockChain Technology and Cyber Security"* from 16th to 20th March 2021. This FDP covers concepts of Blockchain Technology and an introduction to Cyber Security.
Resource Person from IIT Guwahati and CDAC Trivandrum
For further information, Please Contact :
Sreena.S 9745394730
Meera Chandran 9072013724
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
One week KTU Sponsored Online FDP on “Recent Development of Biopolymer and Sustainable Composites fo
Respected Sir/Madam,
Greetings from Sree Buddha College of Engineering, Pattoor, Alappuzha District, Kerala
Mechanical Engineering Department, Sree Buddha College of Engineering, Pattoor presents one-week APJ Abdul Kalam Technological University sponsored Faculty Development Programme on“Recent Development of Biopolymer and Sustainable Composites for Engineering Applications” from 15th March to 19th 2021
Registration link
https://forms.gle/SwBZPHkfqtQgLgwb6
No registration fees
Last Date of Registration 13-03-2021
Who can attend?
Faculty members of the KTU approved institutions
Certificates will be issued to the participants on successful completion.
The program brochure along with the registration form link is enclosed herewith for further information.
Resource Persons:
Dr. Kuruvilla Joseph
Indian Institute of Space Science and Technology (IIST), Kerala
Dr. Gaurav Manik
IIT, Roorkee
Dr. Mudrika Khandelwal
IIT, Hyderabad
Dr. E. Bhoje Gowd
CSIR – National Institute for Interdisciplinary Science and Technology (NIIST)
Dr. Sreejith Shankar
CSIR – National Institute for Interdisciplinary Science and Technology (CSIR – NIIST)
Dr. Kadhiravan Shanmuganathan
Polymer Science and Engineering Division, CSIR-National Chemical Laboratory, Pune
Dr. Mini Mol Menamparambath
NIT Calicut, Kozhikode, Kerala
Dr. Lynda Velutheril Thomas
Sree Chitra Tirunal Institute for Medical Sciences & Technology, Kerala
Dr. K. N. Bharath
GM Institute of Technology, Karnataka
Dr. R. Edwin Raj
St. Xavier’s Catholic College of Engineering, Tamilnadu
Dr. J. S. Binoj
Sree Vidyanikethan Engineering College, Andhra Pradesh
Dr. Vettivel S C
Chandigarh College of Engineering and Technology, Chandigarh
Dr. Rani Pavithran
College of Engineering College, Kerala
Dr. Anand Sekhar R
TKM College of Engineering, Kerala
Dr. Jaya Mary Jacob
Sree Buddha College of Engineering, Pattoor, Kerala
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
Forensics in Structural and Geotechnical Engineering" [15th -19th March 2021]
Department of Civil Engineering,Albertian Institute of Science & Technology,Kalamassery is organizing APJ Abdul Kalam Technological University(KTU) sponsored 5 days Faculty Development Programme on "Forensics in Structural and Geotechnical Engineering" from 15th to 19th March 2021.This FDP is open to faculty members of APJ Abdul Kalam Technological University(KTU) affiliated Engineering Colleges.Eminent experts from industry/academia will take sessions on Structural /Geotechnical engineering failures and diagnostic studies done on those failures. Last date of registration:10.03.2021.For more details,refer to the attached brochure.
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
MECH CRAFT ?21 - An Intercollegiate State-Level Student Project Competition
The Department of Mechanical Engineering, Albertian Institute of Science and Technology (AISAT) is organizing MECH CRAFT ?21 on July 2021 in association with the Institution of Engineers (India) [IEI]. The student project competition aims to provide an opportunity to expose new technical ideas and solutions in the field of Mechanical Engineering. We invite B. Tech. Mechanical Engineering students to participate in the event.
Send your abstract on or before 28th February 2021:
https://docs.google.com/forms/d/e/1FAIpQLSfNnHpSTLjz7ydNnqPkMGKKbVnqUxbo1F2mYpRPRJB4rCUO8g/viewform?usp=sf_link
Online National Conference on NATIONAL CONFERENCE ON INFRASTRUCTURAL INNOVATIONS AND ENVIRONMENT
Department of Civil Engineering, College of Engineering Vadakara in association with Uralungal Labour Contract Co-operative Society (ULCCS Ltd.) Vadakara, is organizing a TEQIP-II sponsored National Conference on "Infrastructural Innovations and Environment" (NCIIE2021) in online mode, during May 5th and 6th, 2021
AICTE ATAL sponsored Online FDP on Applications of AI in Healthcare
Department of Biomedical Engineering, Model Engineering College,Thrikkakara organises an ONLINE FDP on Applications of AI in Healthcare, as part of AICTE ATAL programme from 22-02-2021 to 26-02-2021.
Online FDP on State-of-the-Art Experimental and Numerical Techniques in Civil Engineering
The Department of Civil Engineering, Saintgits College of Engineering (Autonomous), Kottayam, Kerala, is organising an Online Faculty Development Programme on “State-of-the-Art Experimental and Numerical Techniques in Civil Engineering” sponsored by the APJ Abdul Kalam Technological University, Thiruvananthapuram from March 1-22, 2021. This programme mainly addresses the young faculty members of KTU affiliated colleges, who are aspiring to do PhD programme in special streams of Civil Engineering. Eminent professors from premier institutes will be giving the participants an exposure to the latest developments in their active areas of research.
Registration Link : fdp.saintgits.org
Registration Fee : Nil
Last Date of Registration : 20th Feb 2021
Online National Conference on Advances in Computing Communication Signals Energy and Technology
INVITATION for ACCSET'21 | 26 - 27 May 2021
http://accset21.co.in
We are pleased to inform you that the College of Engineering Vadakara, Calicut, Kerala, India is organizing an Online National Conference on Advances in Computing Communication Signals Energy and Technology, ACCSET'21, scheduled to be held on 26th and 27th of May 2021. The conference is intended to provide a forum for researchers and engineers from broad fields of electrical, electronics, instrumentation, computer and information technology to share ideas and disseminate research findings in emerging areas of signal processing, communication, power, computation and other fields of technology. The technical program is proposed to have keynote lectures and technical sessions.
AICTE ATAL sponsored Online FDP on TELEMEDICINE AND DIGITAL HEALTH
Department of Biomedical Engineering, Model Engineering College,Thrikkakara organises an ONLINE FDP on Telemedicine and Digital Health as part of AICTE ATAL programme from 15-02-2021 to 19-02-2021.
For registration details Please see the link:
https://atalacademy.aicte-india.org/login
6 day National level Online FDP on "Professional Ethics in current pandemic scenario "
We are happy to announce that the Department of Electronics & Communication Engineering is organizing a TEQIP II sponsored 6 day National level Online FDP on "Professional Ethics in current pandemic scenario " from 22nd to 27th February 2021. This FDP aimed to cover the entire aspects of Newly introduced mandatory subject HUT200 Professional Ethics (2019 scheme)to all branches by APJ Abdul Kalam Technological University with eminent experts from this field from premier institutions and organizations.
REGISTRATION LINK:
https://forms.gle/k8WFuYZrvCxyFKBy9
Last date of registration: 19/02/21
Participants need to register and upload a scanned copy of permission letter from the Head of the Institution in the field provided in the google registration form. Online session details will be communicated to the registered participants through mail or Whatsapp. Registration is free. E -Certificate will be issued to those eligible participants.
International Online FDP on "Industry Adaptation Through Advancement in Electronic Technology"
Department of Electronics and Communication Engineering, College of Engineering Perumon is going to organize an International Online FDP on "Industry Adaptation Through Advancement in Electronic Technology" on 9 to 15 February 2021. This FDP is mainly intended for bridging the gap between Industry and Academia. In the present scenario, even though the students are graduated with high scores, they are struggling to understand the needs of the industry. The objective of this FDP is to give right orientation among faculty members according to the needs of the industry and for equipping the students industry ready.
Eminent speakers from various Universities/Industry around the Globe shall interact with delegates during the program. We sincerely believe that the FDP would be immensely helpful for their research/teaching/academic activities
The candidates can register their names through the following link on or before 7.2.2021
https://forms.gle/2tuxLxaQnHQn1Rvx7
Conference at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
International Conference on Emerging Trends in Signals, Systems & Information
International Conference on Emerging Trends in Signals, Systems & Information(ICETSSI 2021) on 27-28th May 2021.
ICETSSI 2021 is the first in the series of biennial international conference organized under the aegis of NGI. The conference aims at bringing together researchers, academicians, industry experts and students working in various aspects of signals , systems and information.
Submission of Abstract- 28 February 2021
Acceptance of abstract - 10 March 2021
Submission of full paper - 20 March 2021
Notification of final selection- 30March 2021
Submission of camera ready- 10 April 2021
Paper in IEEE format (4 to 6 pages)
Conference at GOVERNMENT ENGINEERING COLLEGE IDUKKI
IEEE International Conference on Communication, control and Information Sciences
All presented papers will be indexed in IEEE Xplore digital library
Published onFeb2021
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
"AISE'21"- An intercollegiate State-level project competition (Dept. of EEE, AISAT)
"AISE'21" is an intercollegiate state-level project competition for B.Tech aspirants hosted by Department of Electrical and Electronics Engineering, AISAT in association with SEEM and IEDC. This event provides a platform for students of Electrical and Electronics Engineering to sharpen their analytical acumen, arrive at reliable conclusions, improve presentation skill, boost their confidence and scale greater heights in their career as an engineer. It aims to inspire students to apply their knowledge, skill and creativity to provide technical solutions to the problems in the field of Electrical and Electronics Engineering.
Five-day online FDP on " Electric Vehicle : Charging & Challenges " from 05 to 09 February 2021
Department of Electrical and Electronics Engineering is organising
TEQIP II sponsored Five-day online FDP on " Electric Vehicle : Charging & Challenges " from 05 to 09 February 2021.
Registration Link
https://forms.gle/ifMdvD7TdyLAwwuj8
Registration Fee :
NIL
Online Platform :
Google meet.
Timings -
09:30 AM to 02.00 PM
Resources Persons from IIT, NIT and other premier institutes.
E-certificate will be provided to all participants who successfully complete this FDP.
For queries contact the co-ordinators,
Mr. Pramod Tharu Panakkal ,
Assistant Professor, pramodtharu@gmail.com
+91 9446012764
Mr. Hemanth Jaison ,
Assistant Professor, hemanthjaison@gmail.com
+91 9995199106
KTU-FDP- AJCE [Biomedical Instrumentation-Research Challenges] [22-01-2021 to 26-02-2021]
The Department of EEE & ECE of Amal Jyothi College of Engineering, Kanjirappally is conducting a five days FDP on ?Biomedical Instrumentation-Research Challenges? sponsored by KTU from 22-02-21 to 26-02-21. The FDP is being conducted under the aegis of the APJAKTU under the FDP scheme. The number of participants is limited to 60 and will be selected on a first come first serve basis.
Link for registration: https://forms.gle/Nt3V4Sya4PkDSbq66
Last Date for Registration?19-02-2021
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
KTU sponsored five days FDP on Data Science and Artificial Intelligence
Faculty Development Programme (Online) on Data Science and Artificial Intelligence
Financially Sponsored by APJ
Abdul Kalam Technological University) jointly organized by the Department of Information
Technology and Department of Computer Science & Engineering, Rajagiri School of
Engineering and Technology, Kochi from 08th February 2021 to 12th February 2021.
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
"INNOVICON 2021"- An Intercollegiate state-level project competition.
"INNOVICON 2021" is an intercollegiate state-level project competition for B.Tech aspirants hosted by Department of Computer Science and Engineering, AISAT. This is an initiative to promote the creative thinking amongst the students of Computer Science and its allied engineering branches. It aims to provide a platform for young learners to present their innovative ideas, research orientation and untapped potentials. This event will also help the participants to interact with other innovative minds and get access to the latest developments in industry.
Six days online FDP on "Applications of Artificial Intelligence and IoT in Engineering"
The Department of Computer Science and Engineering is organising
TEQIP II sponsored Six days online FDP on "Applications of Artificial Intelligence and IoT in Engineering" from 01 to 06 February 2021.
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
"Abhinav Vichaar"an Intercollegiate state-level project competition.(Department of ECE,AISAT)
This is an initiative to promote the innovative ventures undertaken by students in the field of electronics and communication and its allied branches. It aims to provide a platform to showcase your project works to a larger part of the tech sector, including industrial professionals.This event will also help the participants to interact with other innovative minds and get access to the latest developments in Electronics Engineering
Five-day Online FDP on "Art of Student Centric Teaching"
Greetings from NSS College of Engineering,Palakkad. We are delighted to inform that the department of Computer Science and Engineering, NSS College of Engineering Palakkad, is organizing APJAKTU sponsored Five-day Online FDP on " Art of Student Centric Teaching " during February 8-12, 2021.
The FDP will provide an insight to the art of student centric teaching. The FDP will equip young teachers with the pedagogical skills in various facets of classroom teaching/learning including student psychology, teaching and learning theories, and inspiration strategies. The program also expects to give an openness to the patterns, issues and difficulties in this field. This Online Faculty Development Program is determinedly arranged around building up the fundamental knowledge expected to prepare the educators to address the quickly changing instructive necessities. During the course of the programme, the participants will be familiar with instructing procedures that can advance free and imaginative intuition among the students
Work Shop at COLLEGE OF ENGINEERING KARUNAGAPPALLY
STTP on Big Data in IOT
Dept. of Computer Science and Engineering, College of Engineering Karunagappally in association with AICTE is organizing a Five Day STTP on “Big Data in IOT”, from February 8th to February 12th 2021.
Six-day Online FDP on "Cyber Security and Blockchain Technology"
Department of Computer Science and Engineering, College of Engineering Perumon, is organizing a Six-day Online FDP on "Cyber Security and Blockchain Technology" during January 18 - 23, 2021.
Conference at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
International Conference on Sustainable materials, Manufacturing and Renewable Technologies
International Conference at Federal Institute of Science and Technology (FISAT)
International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021)
The mechanical engineering department of Federal Institute of Science and Technology (FISAT) is organizing an International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021) during 22nd & 23rd April 2021.
Call for papers
Prospective authors from India and abroad are invited to submit manuscripts that report original, unpublished research and recent developments in the topics related to the conference. Full length articles that illustrate research results, experimental works and industrial experiences describing significant advances are solicited.
To submit your abstracts, login to the submission Web page for i-SMaRT 2021 in Easy Chair.
https://easychair.org/conferences/?conf=ismart2021
Last date for paper submission is 10th February 2021.
Publication
All the accepted papers will be peer-reviewed and published in the following Scopus indexed journals.
1. Materials Today: Proceedings published by Elsevier and will be made available through ScienceDirect. The journal accepts novel, unpublished research in the field of materials science, technology and engineering.
2. International Journal of Mechanical Engineering is a Scopus indexed journal with ISSN: 0974-5823. The journal publishes the recent advances and developments in Mechanical Engineering domain.
For further details refer enclosed conference brochure and conference website given below.
https://cutt.ly/i-SMaRT2k21
Keynote Speakers
Some of the eminent keynote speakers are,
1. Prof. Harris Makatsoris, King's College London, UK.
2. Dr. Babak Anasori, Purdue School of Engineering & Technology, Indiana University–Purdue University Indianapolis, USA.
3. Dr. Mikhail Babenkov, Peter the Great St.Petersburg Polytechnic University, St. Petersburg, Russia.
4. Dr. Harish S. Krishnamoorthy, University of Houston, USA.
5. Dr. M. R. Sanjay, King Mongkut’s University of Technology North Bangkok, Thailand.
Contact Details
Conference Email: ismart2k21@gmail.com
Organizing Secretary
Dr. Midhun Paul : 9744755767 or Mr. Harish T M : 9746481627
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
MOUNT ZION COLLEGE OF ENGINEERING, Kadammanitta, Pathanamthitta
proudly presents
WEBINAR on
"Embedded Systems and IoT"
? Date: 21.12.2020
? Time: 10.00am To 11.30am
? Platform: ZOOM
? *Registration Link: https://forms.gle/D8EjMJM9cCsvTuXSA
? E-certificates will be provided for registered participants
For more information, contact:
9447963458, 8129425154
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
STTP IoT and Data Science
This STTP focuses
on delivering the latest developments in
this field that would inspire researchers to
work in this leading edge technology. The
programme comprises of both talks and
hands-on sessions.
Published onDec2020
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
What Industry needs from Engineering Graduates!!.
We, the Department of Mechanical Engineering, Association of Royal Mechanical Engineers(ARME) in association with Conceptia Konnect, invite you to join the Webinar on What Industry needs from Engineering Graduates!!.
Published onDec2020
Conference at BASELIOS MATHEWS II COLLEGE OF ENGINEERING
International Conference on Material Science and Computational Engineering (ICMCE 2021)
It gives us immense pleasure to bring to your kind notice that the Baselios Mathews II College of Engineering College, Sasthamcotta, Kollam, Kerala - 690520, is organizing an
Elsevier & IOP Conference Series: Materials Science and EngineeringSponsored
International Conference on Material Science and Computational Engineering (ICMCE 2021) during April 22-23, 2021
Submission
Submissions must be original and should not have been published previously or be under consideration for publication while being evaluated for this conference. The manuscripts should be submitted through the following link:
https://cmt3.research.microsoft.com/ICMCE2021
Publication
All accepted and registered papers will be published in any one of publications listed below:
1. IOP Conference Series: Materials Science and Engineering (MSE) 17578981, 1757899X (SCOPUS INDEXED)
2. Conference Proceedings SSRN - Elsevier
3. Scopus indexed Journals
Keynote speakers:
1. Dr.Swagatam Das, ISI Kolkotta
2. Dr.Pradip K.Das, IIT Guwahati
3. Dr. Shivashankar B. Nair, IIT Guwahati
4. Dr. Rusli Abdullah, Universiti Putra Malaysia, Malaysia
5. Prof.Valentina Emila Balas, Head of the Intelligent Systems Research Centre, Romania
Last Date for Full Paper Submission is : 22nd March 2021
For more information, please visit www.bmce.co.in
Contact:
Dr. L.Padma Suresh Ph.D (EE), Ph.D(CS)
Conference Chair. +91 8281289115
icmce2k21@gmail.com
Prof. Arun Baby Zacharia
Organising Secretary: +918301831401
Webinar on What Industry needs from Engineering Graduates
Mount Zion College of Engineering,
Department of Mechanical Engineering
We, the Department of Mechanical Engineering & Conceptia Konnect, invite you to join the Webinar on What Industry needs from Engineering Graduates!!.
1. What is Design?
2. Industry readiness.
3. Introduction to Industry 4.0.
4. Design Automation.
We will also discuss what are the upcoming opportunities in the market due to rapid adoption of digital prototype testing during product design process, involving FEA techniques during the testing stages enable organizations to effectively reduce time to market, improve product quality, and minimize overall production costs.
Speaker: Mr. VINAY S
Manager - Education & Training, Conceptia Konnect
??Date: 15th December 2020
? Time: 11.00am - 1.00pm
Platform: Google Meet
https://meet.google.com/ffa-wcss-csu
Thanks and Regards,
Prof. Navish Kumar
HOD, Department of ME
Mount Zion College of Engineering
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
MOUNT ZION COLLEGE OF ENGINEERING, Kadammanitta, Pathanamthitta
proudly presents
WEBINAR on
"Analog and Digital Circuit Simulation"
? Date: 18.12.2020
? Time: 10.00am To 11.30am
? Platform: Google Meet
? *Registration Link: https://forms.gle/rCoguJMHmofGvnj89
? E-certificates will be provided for registered participants
For more information, contact:
9447963458, 8129425154
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
CADD Foundation Course
CADD Foundation course, 5 day programme starting from 11/12/20 by CADD Centre N.Paravur.
Postponed to 11/12/20
Published onDec2020
Conference at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
INTERNATIONAL CONFERENCE (ONLINE) on NUMBER THEORY AND DISCRETE MATHEMATICS (ICNTDM)
INTERNATIONAL CONFERENCE (ONLINE)
on NUMBER THEORY AND DISCRETE MATHEMATICS (ICNTDM)
11 to 14 DECEMBER-2020
?To mark hundredth year of passing away of Srinivasa Ramanujan? Organised by
RAMANUJAN MATHEMATICAL SOCIETY
Hosted by RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY (RSET) - AUTONOMOUS, Kochi, India
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
STTP on OUTCOME BASED EDUCATION FOR TECHNICAL INSTITUTIONS PHASE-3
AICTE SPONSORED
6 DAYS SHORT TERM TRAINING PROGRAMME ON
OUTCOME BASED EDUCATION
FOR TECHNICAL INSTITUTIONS PHASE-3
OUTCOME BASED EDUCATION AND ACCREDITATION
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
SANNADHASENA of Kerala Govt.
Orientation and Training Workshop on Kerala Govt. SANNADHASENA, by NSS Master Trainers, an NSS Unit Initiative.
Postponed to 5/12/20.
Published onDec2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Marketing, Opportunities and Scope
Webinar on Marketing, opportunities and scope by Sri. Shankar Sukumaran, Territory Head(Dulux Paints), Akzo Nobel India Ltd.
Published onDec2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Future of Automotive Industry and Opportunities for Engineers
Webinar on Future of Automotive Industry and Opportunities for Engineers by Sri.Jacob Netto, Production Head, Apollo Tyres Ltd, Kalamassery.
Published onDec2020
Work Shop at AMAL JYOTHI COLLEGE OF ENGINEERING
AICTE Sponsored STTP Phase III at Amal Jyothi College of Engineering
Six Days STTP on 'Paradigm Shift in Assessment and Evaluation Practices for Engineering Graduates'
A paradigm shift is a fundamental change in the basic concepts and experimental practices of implementing education by faculty. Our education system is undergoing a change as announced by the Higher Education Council of India and the National Research Foundation through the NEP. This STTP is focused on making the faculty empowered for an outcome-based education with new pedagogical approaches and thus bring out the best in students. An Introduction to Outcome Based learning and the methods to achieve the Program Outcomes was presented by eminent and experienced resource persons in Phase 1 which was conducted from October 19th to 24th. The phase 2 of this STTP focused on NEP and accreditation procedures which was conducted from November 16th to 21st. The Phase 3 of the STTP focuses on 'The Need for Modern Tool Usage in Engineering Education' The entire objective of the STTP is covered in the three phases.
For more information Kindly visit the STTP website https://ajce.in/ece/sttp_dept_ece_3.html
We invite you to register for the STTP using the link https://forms.gle/8h3qWD3MS2XT2dARA
The Brochure for Phase III is attached
CSI State Student Convention @ Saintgits College of Engineering
The Kerala State level Student Convention of Computer Society of India (CSI) is going to be held virtually on 04th December 2020 at Saintgits College of Engineering. Any UG/PG student from a UGC/AICTE recognized institution can participate in the events.
Winners will get offers on internships, cash prizes, and certificates. The students will be eligible for securing activity points through this event.
For Registration and more details, please visit the website:- csi.saintgits.org
Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
International Conference on Innovative Trends in Engineering for Sustainability (ICITES-2021)
Department of Civil Engineering, Toc H Institute of Science & Technology, Arakkunnam and Odessa State Academy of Civil Engineering & Architecture, Ukraine is jointly organising an International Conference on Innovative Trends in Engineering for Sustainability (ICITES-2021) with theme Sustainable Infrastructure Development from January 9-11, 2021.
For the details and submissions, visit: https://sites.google.com/view/icites2021
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
STTP on Guidance and Counselling
AICTE Sponsored Online
Short Term Training Program (STTP) series on GUIDANCE & COUNSELLING. Series II will be conducted from 07th to 12th December, 2020. For registration please mail to sttpgc2020@sjcetpalai.ac.in or contact @9447921482
Published onNov2020
Conference at AMAL JYOTHI COLLEGE OF ENGINEERING
AICTE Sponsored International E-Conference
AICTE Sponsored Scopus Indexed International E-Conference on Computing & Communication Systems for a Fourth Industrial Revolution, the 9th edition of Annual International Conference on Emerging Research Areas (AICERA 2020), which will be held on 14-16 December 2020 in Amal Jyothi College of Engineering Kanjirappally, Kerala, India.
The Conference aims at bringing together the researchers, scientists, engineers, and scholar students in all areas of Engineering and Technology, and provides an international forum for the dissemination of original research results, new ideas and practical development experiences which concentrate on both theory and practices. The after-conference proceeding of the AICERA 2020 will be published in SCOPUS Indexed IOP Conference Series, Material Science and Engineering (MSE) (SSN: 1757-8981).
For more details, please visit the conference website: http://aicera.in/.
Email: aicera2020@amaljyothi.ac.in
Submission Deadline: November 25, 2020
Submission Link: https://easychair.org/conferences/?conf=aicera2020
Registration Link: https://forms.gle/LRAS3P2a8pgP6gda9
WEBINAR on "Backstepping Controller Design For Industry Processes"
DEPARTMENT OF APPLIED ELECTRONICS AND INSTRUMENTATION ENGINEERING,
MOUNT ZION COLLEGE OF ENGINEERING, Kadammanitta, Pathanamthitta
proudly presents,
WEBINAR on
"Backstepping Controller Design For Industry Processes"
? Date: 23.11.2020
? Time: 11.00am To 12.00pm
? Platform: Google Meet
? Registration Link: https://forms.gle/fjyGtywpcJZVrhZS6
? Limited seats
? E-certificates will be provided for registered participants
For more information, contact:
6235399107, 9495657511
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
AICTE Sponsored Six days STTP on the topic "Robotics, Artificial Intelligence and Control" - Phase 2
We are happy to inform you that the Department of Electronics of Toc H Institute of Science and Technology is organizing an AICTE Sponsored Six days Virtual Short Term Training Programme on the topic "Robotics, Artificial Intelligence and Control" from 30th November 2020 to 5th December 2020.The training programme is open to faculty members from AICTE approved Engineering colleges, research scholars, Industry persons and PG students, which aims to provide the participants with the latest techniques in Robotics, AI and Control through lecture sessions by various experts in this field.
The brochure and the speaker details are attached for your perusal.
The number of participants is limited to 100 and the participants will be selected on a First Come First Serve basis. Registration is free .E-Certificate will be issued to those participants who attend all the sessions and qualify in the test conducted at the end of the programme.
WEBINAR on "Engineering Functional Materials and Hybrids for Cancer Imaging"
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING,
MOUNT ZION COLLEGE OF ENGINEERING, Kadammanitta, Pathanamthitta
proudly presents,
WEBINAR on
"Engineering Functional Materials and Hybrids for Cancer Imaging"
? Date: 20.11.2020
? Time: 11.00am- 12.00 noon
? Platform: Google Meet
? Registration Link: https://forms.gle/7LkyRwjFzLMqPj3q6
? Limited seats
? E-certificates will be provided for registered participants
For more information, contact:
9539525239, 9072152956
Published onNov2020
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
AICTE Sponsored STTP on Outcome Based Education for Technical Institutions Phase II
AICTE SPONSORED
6 DAYS SHORT TERM TRAINING PROGRAMME ON
OUTCOME BASED EDUCATION
FOR TECHNICAL INSTITUTIONS PHASE II: OUTCOME BASED EDUCATION AND AUTONOMY
Online Faculty Development Programme on ADVANCES IN NANOTECHNOLOGY
Department of Mechanical Engineering of College of Engineering Perumon is organizing Online Faculty Development Programme on ADVANCES IN NANOTECHNOLOGY during 04th and 06th of November 2020. This course is intended for faculty members from engineering and polytechnic colleges in all disciplines and industrial professionals.
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
One week AICTE Sponsored OSTTP on Smart Materials, Automation and its Future Impact on Humans (Part
Greetings from Sree Buddha College of Engineering, Pattoor, Alappuzha District, Kerala
Mechanical Engineering, Sree Buddha College of Engineering, Pattoor presents six Days AICTE Sponsored Short Term Training Program (STTP) on Smart Materials, Automation and its Future Impact on Humans (Part-2) from 16th November to 21st 2020
Registration link
https://forms.gle/epk7Ra89wrcnLdDD6
No registration fees
Last Date of Registration 09-11-2020
Who can attend?
Faculty members of the AICTE approved institutions, research scholars, PG Scholars, participants from Government and Industry.
Certificates will be given to participants on successful completion.
We request you to avail this opportunity and participate/depute your faculty/ researchers who are pursuing Ph.D. related to the program.
The program brochure along with the registration form link is enclosed herewith for further information.
We request you to kindly promote the AICTE sponsored STTP among the faculty members and make it a success
Co-ordinator: AICTE-STTP-SAFIH 2020
Dr. J.B.Sajin
Associate Professor
Dept of Mechanical Engineering
Sree Buddha College of Engineering
Pattoor, Kerala
AICTE SPONSORED ONLINE SHORT TERM TRAINING PROGRAMME ON RAPID PROTOTYPING AND DIGITAL MANUFACTURING
Greetings from NSS College of Engineering Palakkad. We are delighted to inform you that the Department of Mechanical Engineering, is organizing an AICTE sponsored Short-Term Training Programme on RAPID PROTOTYPING AND DIGITAL MANUFACTURING from 7th November The participants of this course will be able to judge the importance of Rapid Prototyping & Digital Manufacturing and its dominant role in Global Product Development and Innovation. In the first series of STTP, participants will be given Introduction to Rapid Prototyping and Digital Manufacturing, different processes and science behind it. Participants will have an insight of current research trends in this field and will help the research scholars and faculty to carryout innovative research. The course will help to explore the broad range of additive manufacturing theory & practice along with applications including Biomedical & Bio-manufacturing, Aerospace, Consumer Products, and Creative Artistry to mention a few. Participants will be able to illustrate the fundamentals of digital manufacturing science and its architecture. Moreover it will be a great platform to interact with the eminent faculties of premier institutes like IITs and NITs and industrial experts.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
AICTE Sponsored Six days STTP on the topic "Robotics, Artificial Intelligence and Control"
The Department of Electronics is organizing an AICTE Sponsored Six days Virtual Short Term Training Programme(STTP) on the topic "Robotics, Artificial Intelligence and Control" from 2nd November to 7th November 2020.?
The Training Programme is open to Faculty members from AICTE approved Engineering Colleges, Research Scholars, Industry Persons and PG Students, which aims to provide the participants with the latest techniques in Robotics, AI and control through lecture sessions by experts in this domain.
Interested candidates must fill up the following Google form.
https://forms.gle/Rsgv66JasP8THQCF8
The Registration is Free and the selected Participants will be intimated by e-mail on 29th October 2020.
E-Certificate will be issued to those participants who attend all the sessions, complete the feedback of all the sessions and qualify in the test conducted at the end of the programme.
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
DATA ANALYTICS:EXPLOITING THE POWER THAT IS DATA -18-10-2020
Students' Association of Computer Science and Engineering,IC@M,MESITAM is conducting a webinar on
DATA ANALYTICS:EXPLOITING THE POWER THAT IS DATA
Resource person:Dr.Vinith R,
HoD ,Dept. Of CSE
Jyothi Engineering College,Thrissur
Published onNov2020
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
National level STTP on Outcome Based Education for Technical Institutions
AICTE sponsored National level STTP on Outcome Based Education for Technical Institutions organized by the Internal Quality Assurance Cell (IQAC) & Department of Mechanical Engineering, Rajagiri School of Engineering & Technology.
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
AICTE Sponsored STTP on " Outcome Based Education with Assessment and Evaluation"
Greetings from Sahrdaya College of Engineering and Technology!!!!
We are delighted to inform you that the Department of Electronics and Communication Engineering, Sahrdaya College of Engineering and Technology, Kodakara, Kerala is organizing an AICTE sponsored Six Days Short-Term Training Programme on ?Outcome Based Education with Assessment and Evaluation? from 9th November. The STTP is organized in three phases. STTP focuses on Program Outcomes of Engineering Graduates, Need for Accreditation in colleges , Assessment and Evaluation and also Modern Tool Usage in Education and Assessment.
Click here (https://www.sahrdaya.ac.in/ece-sttp/) to register for the STTP on or before 02nd November 2020.
As it is AICTE Sponsored STTP, there is no registration fee.
The number of participants is limited to 100 and the participants will be selected on a First come First serve basis.
Registrations will be confirmed based on scrutiny by the Programme Evaluation Committee.
The selected participants will be intimated by Email on 04th November 2020
The brochure of the STTP is enclosed herewith.
For further details, visit the https://www.sahrdaya.ac.in/ece-sttp/
For queries related to the STTP please contact:
Dr. Vishnu Rajan, Convenor 8113997771 hodece@sahrdaya.ac.in
Dr.G R Gnana King,Coordinator 9488883786 gnanaking@sahrdaya.ac.in
Ms. Binet Rose , Coordinator 9995516894 binetrose@sahrdaya.ac.in
Seminar at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
International webinar on "Emerging Trends in the Field of Science & Humanities"
The Department of Science and Humanities, FISAT is organising a Two-day International webinar on "Emerging Trends in the Field of Science & Humanities" on 16th and 17th of October 2020.
Registration link
https://rb.gy/cz1cm8
No registration fee.
Please use the link given below to join the webinar Whatsapp group.
https://chat.whatsapp.com/FtRspn69oPUCnyB1sAccm9
e-Certificates will be issued to all participants who submit feedback form.
6-Day AICTE Sponsored STTP- Introduction to Special Topics like Nano,Bio,Space Tribology
6-Day AICTE Sponsored STTP Series 3 of 4 - Introduction to Special Topics like Nanotribology, Biotribology, Space Tribology, Biomimetics and Tribology in Industry
October 12-17, 2020
Tribology is a branch of Mechanical Engineering and materials science which deals with science and technology of interacting surfaces in relative motion and of related subjects and practices. Importance of tribology for sustainable reliability cannot be over emphasized. It is reported that loss due to improper understanding and application of tribology is over 1.5% of GDP of the developed countries like USA. We can well imagine the state of affairs in our country, where, awareness about importance, understanding and application of tribology is rather low. Tribological failures are responsible for over 40% of breakdowns in industries. Therefore, engineers working in the field need to have a thorough understanding of tribological practices, so that proactive measures can be implemented in place of traditional corrective and breakdown maintenance practices.
For more details:
STTP Website: http://fdp.saintgits.org/nanotribology/
Registration Link:
https://docs.google.com/forms/d/e/1FAIpQLSeLDyO2dqVvB7PclbXzLsJSfRIfxNrWkzgpgo_q--QKLuFEHg/viewform
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
AICTE Sponsored Six days Virtual Short Term Training Programme
The Department of Electronics, Toc H Institute of Science and Technology is organizing an AICTE Sponsored Six days Virtual Short Term Training Programme on the topic "Trends and Technologies in Antenna Design and its Research Scopes" from October 12th to Octobert 17th 2020. The training programme is open to faculty members from AICTE approved Engineering colleges, research scholars, Industry persons and PG students. World-renowned experts who have specialized in the field of Antenna Design will handle the current, futuristic concepts and provide insight into the contemporary challenges.
The brochure and the speaker details is attached for your perusal.
Conference at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
International Power and Energy Conference (PECon2021) - Feb 1-3, 2021
Department of Electrical and Electronics Engineering of Federal Institute of Science and Technology (FISAT), Angamaly is hosting a virtual International “Power and Energy Conference, PECon 2021during February 1 to 3, 2021, Kerala, India. The major theme of the conference is Smart Technologies for Power and Renewable EnergyThe primary goal of the conference is to create a platform where experts from academia and industry share the recent developments in this area by which researchers, students and faculty get benefitted.
Easychair link for paper submission: https://easychair.org/conferences/?conf=pecon2021
Last Date of Abstract Submission: 05 Oct 2020.Date Extended to 20th October 2020.
International Conference on Innovations in Science and Technology for Sustainable Development (ICIST
Department of Computer Science and Engineering (CSE) and Department of Mechanical Engineering (ME) are jointly organizing an International Conference on Innovations in Science and Technology for Sustainable Development (ICISTSD 2020) during November 23 - 24, 2020
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
STTP ON GUIDANCE & COUNSELLING
AICTE Sponsored Online
Short Term Training Program (STTP) series on GUIDANCE & COUNSELLING. Series 1 will be conducted from 12th to 17th October, 2020
Published onOct2020
Work Shop at MODEL ENGINEERING COLLEGE
AICTE ATAL sponsored ONLINE FDP on Recent trends in Photonics
Department of Electronics Engineering, Govt. Model Engineering College, Kochi, Kerala is organizing 5 Days online Faculty Development Programme (FDP) on "Recent trends in Photonics" from 19th to 23th October 2020. The FDP is supported by the AICTE Training and Learning (ATAL) Academy.
For registration, please visit AICTE-ATAL website
https://atalacademy.aicte-india.org/signup
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
A One week AICTE Sponsored Online Short Term Training Program on SAFIH
Mechanical Engineering, Sree Buddha College of Engineering, Pattoor presents six Days AICTE Sponsored Short Term Training Program (STTP) on Smart Materials, Automation and its Future Impact on Humans (Part-1) from 12th October to 17th 2020
Registration link
https://forms.gle/t4wDcWuAB3sG8ACH8
No registration fees
Last Date of Registration 09-10-2020
Who can attend?
Faculty members of the AICTE approved institutions, research scholars, PG Scholars, participants from Government and Industry.
Certificates will be given to participants on successful completion.
We request you to avail this opportunity and participate/depute your faculty/ researchers who are pursuing Ph.D. related to the program.
The program brochure along with the registration form link is enclosed herewith for further information.
We request you to kindly promote the AICTE sponsored STTP among the faculty members and make it a success
With Best Wishes,
Dr. J.B.Sajin
Co-ordinator: AICTE-STTP-SAFIH 2020
Associate Professor
Dept of Mechanical Engineering
Sree Buddha College of Engineering
Pattoor, Kerala
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
ATAL FDP
ONE WEEK FACULTY DEVELOPMENT PROGRAMME (Online) on ARTIFICIAL INTELLIGENCE Organized by Department of Information Technology, RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY(AUTONOMOUS) from 19th - 23rd, OCTOBER 2020
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
A Webinar on Interpretation of Machine learning20 Sept 2020
Association of Electrical and Electronics Engineering department, 'TESLA' is organizing a webinar on Interpretation of Machine learning.
Published onSep2020
Seminar at PROVIDENCE COLLEGE OF ENGINEERING
Introduction to Sophisticated Analytical Instruments
The webinar on 'Introduction to Sophisticated Analytical Instruments' is primarily intended to assist the student following an electrical and electronic engineering degree course. The webinar discussion will mainly overlay a brief perception of various analytical instruments involved in the power engineering sector.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
A webinar session on the topic" Understanding XR technologies- Significance,Trends and Applications"
Embright Infotech is a technology-based company working in Virtual Reality, Augmented Reality, Mixed Reality, Artificial Intelligence, and IoT. We are recipients of the highest innovation grant BIRAC BIG 15 from the Government of India and won the TMA- ADANI best startup award 2020.
We are happy to inform you that our product " Eduoskus XR " is launching virtually on 12th Sep.
As part of the inauguration ceremony we are conducting a webinar session on the topic " *Understanding XR technologies- Significance, Trends and Applications* " in association with ASAP and Department of Mechanical Engineering, Toc H Institute of Science and Technology, Ernakulam, is scheduled on 12th & 13th September 2020 at 5 pm IST and the session will be taken by Mr. Joseph Bose, Senior Specialist in Occupational Therapy, Ministry of Health Kuwait, Mr. Sathaynarayanan A R, CEO & Co-founder of Embright Infotech and Ms. Neethu Sathyan, District Program Manager, ASAP.
Webinar Registration link: https://forms.gle/xw7mAPaxyWuLad6v7
Hereby attaching the invitation card for the launch, webinar, and brochure.
Expecting your presence at the launching ceremony and webinar session.
Conference at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
International Conference on Discrete and Applied Mathematics (ICDAM-2020)
Centre for Studies in Discrete Mathematics , Vidya Academy of Science & Technology is organising an International Conference on Discrete and Applied Mathematics (ICDAM-2020) in association with Kerala Mathematical Association(KMA),for academicians, scientists, researchers, engineers and industrialists, during 18-19, September 2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
APJ AKTU NSS CELL PROJECT 2020
APJ AKTU NSS CELL PROJECT 2020 Ernakulam Region Presentation hosted by KTU NSS Cell Unit No:224
Published onSep2020
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
PRACTICAL ASPECTS IN BUILDING CONSTRUCTION by CE
Day 2 : Prof. Abi Basheer B ( HOD , Dept. of Civil Engg, MESITAM)
WEBINAR for FRESH CIVIL ENGINEERING GRADUATES through ZOOM
Published onSep2020
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
RESIDENTIAL DESIGN METHODOLOGY BY CE
Day 1 : Mr. Harish K R ( Architect ) 4:00 pm to 5 Pm Topic : RESIDENTIAL DESIGN METHODOLOGY-
WEBINAR for FRESH CIVIL ENGINEERING GRADUATES through ZOOM
Published onSep2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Career Options after Engineering in the current New Normal
A Webinar on " Career Options after Engineering in the current New Normal" by Sri. Anil Warrier, Head of India Talent Acquisition, Amazon We Services.
Published onSep2020
Seminar at PROVIDENCE COLLEGE OF ENGINEERING
Climbing Technical Leadership with IEEE PELS
The webinar speaker is Dr Frede Blaabjer. He is the President IEEE PELS and Professor, Alborg University, Denmark
He has received numerous awards and honours throughout his career, a few are listed below.
IEEE Edison Medal, 2020
Global Energy Prize, 2019
He was the world's most cited in Engineering in 2016
Honoured with Knight of the Order of the Dannebrog by Her Majesty, Queen Margrethe II of Denmark
Vice President of the Danish Academy of Technical Sciences
IEDC College of Engineering Perumon is hosting a webinar on the topic "Automation : RPA & Beyond" taken by 1, Mr Manoj Krishna M ,Service Delivery Manager , EY GDS
2, Mr Krishna Sasidharan ,Senior Delivery Manager , EY GDS
??On 27 August 2020
?Time : 5:00 - 6:15 PM
?platform : Google Meet
Register at : https://forms.gle/N1pKnZxXTQuDcuSq8
Published onSep2020
Conference at ADI SHANKARA INSTITUTE OF ENGG AND TECHNOLOGY
International Conference titled ACCESS’ 21- Advances in Computing, Communication, Embedded and Secur
It gives us immense pleasure to announce that we are organizing the second edition of our International Conference titled ACCESS’ 21- Advances in Computing, Communication, Embedded and Secure Systems (ACCESS' 21) from 26th May 2021 to 28th May 2021. ACCESS' 21 is a premier international technical conference hosted by Adi Shankara Institute of Engineering and Technology, Kalady, Kerala, India and technically sponsored by IEEE Kerala Section. This is a major international conference bringing together researchers, engineers and practitioners who work in the areas of computing, communication, security and its applications in the industry and real world. This conference is not only a spectacular meeting to share information and knowledge about futuristic technologies and its challenges, but also a pivotal help to build an effective platform for communication and cooperation among the researchers/academicians worldwide. It presents original significant and quality research work contributions on the theories and practices on next generation technologies. The conference is projected to invite a large number of quality submissions and stimulate the cutting-edge research discussions among many academic pioneering researchers, scientists, industrial engineers, students and provide a forum to all of them.
For more details please refer www.access21.in
Topics Include (But not limited to)
Cyber Physical Systems and IoT
Computer Science and Big data
Artificial Intelligence
Machine Learning
Block Chain
Data Analytics
Computing (Cloud, Cluster, Grid, Soft, Edge, Fog, Quantum etc.)
Reconfigurable systems, MEMS/NEMS
Networking Protocols and communication (mm Wave technologies, cognitive radio, spectrum management, WBAN, multi carrier, M2M communication etc.)
Signal and Image Processing
Cyber Security
Data Security/Information Assurance
PAPER SUBMISSION
All submissions will be handled electronically using EasyChair via the paper submission link :
https://easychair.org/conferences/?conf=access21
Authors are hereby instructed not to submit any paper via emails directly. ACCESS' 21 takes plagiarism very seriously and regards plagiarism as a professional misconduct. Papers will be screened for plagiarism and if similarity is more than 20% , the paper will be rejected.
PUBLICATION:
All the accepted and presented papers will be submitted for publication in IEEE Xplore
REGISTRATION:
Category
Registration Fees
Faculty, IEEE Members
Rs. 6500/-
Faculty, Non IEEE
Rs. 8000/-
Students, IEEE Members
Rs. 4400/-
Students, Non IEEE
Rs. 5500/-
Industry professionals , IEEE members
Rs. 7650/-
Industry professionals , Non IEEE Members
Rs. 10000/-
Foreign delegates, Professionals IEEE members
255 USD
Foreign delegates, Professionals Non- IEEE
300 USD
Foreign delegates, Students IEEE members
125 USD
Foreign delegates, Students Non- IEEE
150 USD
Listeners (Inside India)
Rs. 500
Listeners (Outside India)
15 USD
IMPORTANT DATES (Deadlines):
Abstract Submission : September 03, 2020
Full length paper submission : November 26, 2020
Notification of Acceptance : January 10, 2021
Registration Fee due date : February 15, 2021
Camera Ready paper submission : March 10, 2021
Conference Dates : May 26-28, 2021
Work Shop at ADI SHANKARA INSTITUTE OF ENGG AND TECHNOLOGY
AICTE ATAL Sponsored 5 days online Faculty Development Program on “Robotics and IR 4.0” starting on
Greetings from the Department of Electronics and Communication Engineering (ECE), Adi Shankara Institute of Engineering and Technology, Kalady
We are glad to announce that we are organizing AICTE ATAL Sponsored 5 days online Faculty Development Program on “Robotics and IR 4.0” starting on 7th to 11th September 2020.
It gives us great pleasure to invite you to take part in this event. A copy of the brochure is attached for your kind perusal.
Content:
·
· Introduction to Robotics
· Robot Kinematics& Simulation hands on.
· Learn Robotics using ROS and Gazebo
· Hands-on.
· Control of Robots.
· Robotics (RPA) and 3D Printing Hands on
· Introduction to IIoT
· Rapid Prototyping IIoT
· IIoT Design From scratch using
· CC3200 Texas Instruments hands on.
· Application design using CC3200 Simple Link WiFI.
· Pushing data to Cloud.
· Data analytics for IIoT
Highlights:
1. Talks will be delivered by field experts.
2. There is no registration fee.
3. Kindly note that the link for joining the FDP will be accessible only for prior
registered candidates.
4. Registration will be on a first come first serve basis
registered candidates.
5. E-Certificates will be issued only for the participants with 80% attendance
for the whole session and 60% marks in the test.
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
Building Energy Optimization Prospects & Opportunities
Dept.Of CE-MESITAM
Published onAug2020
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
A Webinar by NSS Unit - JIFFY WITH PHYSICIAN
A Webinar by NSS Unit - JIFFY WITH PHYSICIAN
July 1st 2020
Published onAug2020
Seminar at COLLEGE OF ENGINEERING KIDANGOOR
Webinar on "Introduction to Research Metrics"
Department of Computer Science and Engineering,CEK is organizing a webinar on "*Introduction to Research Metrics *"
Webinar covers the following topics: Performance Indicators related to
Research and their significance ( Impact Factor, SCI/SCIE, ESCI, SJR, Eigen Factor , SNIP, CiteScore, Altmetrics, h-index etc)
*Resource Person*:
Dr. Abhilash Antony
Faculty Chairman, Research and Consultancy Cell
Muthoot Institute of Technology and Science,Kochi
Date : 13-08-2020 *(Thursday)*
Time:11:00 AM- 12:00 PM IST
Platform: *Google Meet*. Registration Link : https://bit.ly/remetrics
No registration fee*
*•E-certificate will be provided to all the active participants*
For Details Contact:
•9497488335
•9633019067
Meeting details will be shared upon registration
5 DAY ONLINE FDP ON NATURAL LANGUAGE PROCESSING, 11th to 15th AUGUST 2020. ORGANIZED BY FOSS CELL AND AND ICFOSS
Published onAug2020
Work Shop at PROVIDENCE COLLEGE OF ENGINEERING
FIVE DAY ONLINE TRAINING ON MACHINE LEARNING
FIVE DAY ONLINE TRAINING ON MACHINE LEARNING ORGANIZED BY FOSS CELL IN ASSOCIATION ICFOSS
Published onAug2020
Work Shop at PROVIDENCE COLLEGE OF ENGINEERING
ONLINE FACULTY DEVELOPMENT PROGRAMM ON EMERGING FIELDS IN THERMAL ENGINEERING
The Faculty development Program focuses on the heat and
mass transfer, applications of FDM, solar thermal systems,
second law analysis of combustion of IC engines, thermal
optimization and cryogenics engineering and its applications.
The FDP will also focus the research opportunities for the
teaching community in these areas of studies. They assess the
current state-of-art and roadmap to crucial areas for future
research on thermal engineering.
Faculty Development Programme On "Professional Ethics"
Faculty Development Programme On
"Professional Ethics"
Organized By
Department of Civil Engineering
Providence College of Engineering,
Chengannur
From: 10th - 14th AUGUST 2020
Published onAug2020
Work Shop at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
FDP on Advances in Materials Engineering and Sustainable Manufacturing
One Week Faculty Development Programme on Advances in Materials Engineering and Sustainable Manufacturing
Date: 10th August to 14th August 2020
Registration link for the FDP: https://tinyurl.com/yy3qtz3x
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
FDP on , "BIOMATERIALS, BIODEVICES & MEDICAL IMAGING PROCESSES"
There has been a profound interest among academia and research organizations towards the development and applications of Biomaterials, biodevices and medical image processing. It is for targeted participants from both engineering colleges and industries pan India.
Department of Computer Science and Engineering is conducting a Webinar on "Support Vector Machines: an introductory note" on 5th Aug 2020, 11 AM - 12 PM.
The session will be handled by Dr. Sunil Kumar, Asst Professor in the School of Computer Science and Engineering, VIT Vellore.
Register at https:// bit.ly/ 2BD70Qc
CO-ORDINATORS:
Alpha Mathew-9447843374,
Mary Priyanka-9446743486
The webinar is meant to enable the audience to develop a clear understanding of theory behind Support Vector Machines in a simple way.
Our Department of Computer Science and Engineering is organizing a Webinar on *"DevOps with Alibaba Cloud"*
*Resource Person*:
Mr. Gavaskar
S.MVP at Alibaba Cloud
03-08-2020 *(Monday)* *
2:00 pm - 3:00 pm IST*
Platform: *Google Meet*https://meet.google.com/aaw-qqev-ccw
Interested participants click here to register:
https://rb.gy/8ofx3g
Participants can attend a quiz after webinar and can receive certificate directly from Alibaba Cloud*
*E-certificate will be provided to all the registered participants*
For Contact:Dr. K. S. Angel Viji,
Associate Professor,
9751280848
Webinar on Design Thinking
How to transform ideas to reality.
Design thinking is a process for creative problem solving. Design thinking has a human centered core. It encourages organization to focus on the people they're creating for which leads to better products, services, & internal processes.
Speaker : Mr. VINEESH U SATHIANATHAN
Behavioral Scientist & Choice Architect
Registration link :
https://bit.ly/30Q6Du2
Google Meet link will be shared in the registered mail-id half an hour before the Webinar..
Date : 03/08/2020 (Monday)
Time : 11AM to 12 PM
Conducted by:
Department of Computer Applications (MCA)
Mount Zion College of Engineering, Kadammanitta.
*Registration is free and e-certificate will be provided to the participants.
Queries :
Prof. Sindhu Daniel 94468 17480
Asst. Prof. Akhilesh Kumar S 94474 40516
e-mail : mzcemca@gmail.com
Computational Biology: Towards Personalized Medicine
Department of Computer Science and Engineering is conducting a Webinar on "Computational Biology: Towards Personalized Medicine" on 28th July 2020, 2 PM - 3 PM. The session will be handled by Dr. Visak R, Asst Professor in the Department of IT, GEC Idukki. The webinar presents an overview of how computation biology can be used to make personalized medicine.
Free Webinar on NUMERICAL SIMULATION OF GRANULAR PROPELLANT COMBUSTION
Free Webinar on NUMERICAL SIMULATION OF GRANULAR PROPELLANT COMBUSTION
Guest Speaker : ANNIE ROSE ELIZABETH ( Dept. of Aerospace Engineering, IIT Madras )
Date : 30th July 2020 , Thursday
Time : 11.00AM
Platform : Google Meet
Registration Link:
https://forms.gle/89g5TxKLc3tv5PpT8
( Also available in the College Website - www.mzce.ac.in )_
Organised by
Aeronautical Engineering Department
Mount Zion College of Engineering
Kadammanitta, Pathanamthitta
Queries : 9539525239, 7907702237
email : mzcwebinar@gmail.com
The prime goal of the FDP is to enhance the knowledge about the latest
developments and smart technologies in the field of Civil Engineering & sustainable
infrastructure
Free Webinar on Intellectual Property Rights
Date : 27th July 2020 , Monday
Time : 03.00PM
Platform : Google Meet
Registration Link:
https://forms.gle/g1Qea8U912KhwoPH7
( Also available in the College Website - www.mzce.ac.in )
Organised by
Department of Mechanical Engineering
Mount Zion College of Engineering
Kadammanitta, Pathanamthitta
Queries : 9539525239, 7907702237
email : mzcmedept@gmail.com
The Department of Civil Engineering of Vedavyasa Institute of Technology, in association with Dalmia Cement Bharat Ltd., invites you to this Webinar on
ADMIXTURE CHEMISTRY
Speaker : Mr.Bobichan Jacob Thomas (Manager - Tech. Services, Kerala, Dalmia Cement Bharat Ltd.)
on July 24, 2020
11.00 AM IST
Registration link
https://forms.gle/ZsXuYuqnY53r4BCC6
Published onJul2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Technical Career Prospects
Webinar on Technical Career Prospects by Dr. Sasidharan Sreedharan, HoD CS Dept, MES Engineering College Kuttippuram.
Published onJul2020
Seminar at COLLEGE OF ENGINEERING KIDANGOOR
Building ML Applications using Google Co-Lab
Department of Computer Science and Engineering is conducting a Webinar on "Building ML Applications using Google CoLab" on 20th July 2020, 2 PM - 3 PM. The session will be handled by Mr. Manu Madhavan, Asst Professor in Department of Computer Science and Engineering, Amritha Viswa Vidyapeetham, Coimbatore. The webinar introduces Google co-Lab for building Machine Learning Applications.
NPTEL Awareness Online Workshop
Wednesday, July 22 2020 10.30 am onwards
https://forms.gle/LEs8bgnQvyg7gKzK8
Published onJul2020
Seminar at COLLEGE OF ENGINEERING KIDANGOOR
Genomic Signal Processing- A Bird's-eye View
Greetings from College of Engineering Kidangoor!!! Dept. of Electronics and Communication Engineering organizes a webinar on 'Genomic Signal Processing- A Bird's-eye View' on 20-07-2020 from 11.00 am to 12.30 pm. It aims at giving an online platform for knowledge sharing to the faculties/ researchers in the field of genomic signal processing.
Registration link: bit.ly/genomics-ece-cek
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
CAD Awareness Programme
A Webinar on Need of CAD awareness in Engineering by Er.Gopu G Nair, Regional Manager Business Support, CADD Centre Training Services Pvt.Ltd.
Published onJul2020
Work Shop at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
Online FDP on IoT &, Robotics, Its Applications
Online FDP on IoT &, Robotics, Its Applications Organized by Department of Mechatronics Engg. & Electronics & Communication Engg., Nehru College of Engineering and Research Centre, Thrissur in collaboration with IETE Palakkad Centre.
Source separation is a rapidly developing field in signal processing.It has numerous applications in research fields including medical imaging,speech recognition,communication systems and astrophysics.The talk concentrates on application of DFT and ICA in cocktail party problem.
This webinar intends to cover the below:
1. Introduction to Data Analytics.
2. Descriptive statistics using SAS.
3. Inferential statistics using SAS.
Date : 17th July 2020 , Friday
Time : 11.00AM
Platform : Google Meet
Registration Link:
https://forms.gle/9WopB1U1zoAz8u1v8
( Also available in the College Website - www.mzce.ac.in )
Organised by
Department of Computer Science and Engineering
Mount Zion College of Engineering
Kadammanitta, Pathanamthitta
Queries : 9539525239, 7907702237
email : csemzce@gmail.com
Published onJul2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Confidence building
A Webinar on How to face exams with confidence- Tips and Tricks by prominent motivational speaker Sri. Vishnu Lona Jacob, CEO AWAKE. Postponed to 14/7/20.
Published onJul2020
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
"Artificial Intelligence and Machine Learning for Biomedical Applications"
The Department of Biomedical Engineering, Sahrdaya College of Engineering and Technology,
Kodakara, Thrissur is organizing a?two week?online FDP on?"?Artificial Intelligence and
Machine Learning for Biomedical Applications" from?July 13th to July 24th
2020.?Resources persons from IIT, NIT, CUSAT, Mathworks and Corel Technologies will be
handling the sessions. The link for registration and payment
is?https://www.sahrdaya.ac.in/bme/.?During this pandemic situation faculty can get the benefit of
taking online FDP?staying safely.?
Please find the attached brochure and flyer of the FDP. Please encourage the faculty fraternity to
make use of this opportunity.
Work Shop at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
Online FDP Security in Global Emergencies organised by CSE, NCERC, ICC & Women's Forum
Department of Computer Science & Engineering, Nehru College of Engineering & Research Centre, Pampady in association with ICC & Women?s Forum is going to conduct a 5 day Faculty development programme on the topic Security in global emergencies.
Date:13th July 2020 to 17th July 2020
Online Platform: Cisco Webex
Registration Link: https://forms.gle/qy82rdEBNyz51fz27
The webinar on 'MIcrowave Engineering made easy' is organized by Dept. of Electronics and Communication Engineering. It aims at giving an online platform for knowledge sharing for the faculties/ researchers in the field of Microwave Engineering during the current COVID-19 epidemiological situation on 25-06-2020 at 11.00 am to 12.30 pm.
Registration link: bit.ly/webinar1-ece-cek
Webinar on"An introduction to GIS in Electrical Distribution System Analysis"
Greetings from M G college of Engineering, Thiruvananthapuram We are organizing a webinar on "An introduction to GIS in Electrical Distribution System Analysis"" on Friday, June 26, 2020 from 11.00 AM to 12.00 Noon. Guest Speaker: Er.. Anntonet Daffodil, Asst. Executive Engineer, TANGEDCO.
Brain Computer Interface (BCI) is a direct communication pathway between an enhanced or wired brain and an external device, which allows for a bidirectional information flow. It is often directed at researching, mapping, assisting or repairing human cognitive functions.
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
a Webinar on "Emerging Technologies & Post COVID Opportunities in IT"
iC@M, informers- Computer Science & Engineering Association @ MESITAM is hosting a Webinar on "Emerging Technologies & Post Covid Opportunities in IT"
Time: 10:30 am
Date: 22nd June 2020
Resource person: Mr. Arun Suresh Kumar,
Product Manager,
Leading MNC,
Technopark, Thiruvananthapuram
Published onJun2020
Seminar at M G COLLEGE OF ENGINEERING
Webinar on "MICROCONTROLLERS in IoT"
Greetings from M G college of Engineering, Thiruvananthapuram
We are organizing a webinar on "Microcontrollers in IoT" on Wednesday, June 24, 2020 from 11.15 AM to 12.15 PM IST.
Guest Speaker: Ms. Dhanya V S, Principal Engineer in C-DAC, Trivandrum and has more than 15 years of industrial experience in electronics and embedded systems
All faculty and students are cordially invited to attend the webinar.
Webinar Registration link: https://bit.ly/mgcet-iot
e-certificate will be provided to all the participants at the end of the session.
Work Shop at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
FACULTY DEVELOPMENT PROGRAMME ON CREATIVITY, INNOVATION AND NEW PRODUCT DEVELOPMENT
FDP Organized by CSE & EEE Dept. OF Nehru College of Engineering and Research Centre in association with IEDC NCERC- 29/06/2020-03/07/2020
Registration Link: https://tinyurl.com/y9l7dt3e
Conference at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
ENVIRONMENT DAY CELEBRATIONS-06-06-2020
Date: 06-06-2020 Online platform: Cisco Webex Time: 10.00 am
Published onJun2020
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
A Webinar on " How to be Sustainable.." by Prof.TS Sigikumar-29-05-2020
Dept of ME is organizing a webinar-How to be Sustainable -29-052020-at 10 am on GOOGLE MEET.
Published onJun2020
Conference at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
ABACon'20 Virtual Conference
Computer Science & Engineering Department of Sahrdaya CET is planning to conduct an Online Virtual conference on Innovations in Computing (ABACon'20) on 22nd June 2020.
We expect participation from final year students, M.Tech students and research scholars. The registration for the conference is free and E-Certificate will be issued for all participants. The Keynote speaker will be Dr. Vinod P, Professor/HOD, SCMS College. Expecting your cooperation and support for the same.
ONE WEEK NATIONAL WORKSHOP on Industrial relevance of Structural and concrete technology
ICI chapter of VVIT in association with ICI calicut chapter is conducting one week long workshop on Industrial Relevance of Structural and Concrete Technology.
The Department of Civil Engineering of Vedavyasa Institute of Technology, in association with ICI Calicut Centre, invites you to this Webinar on
MODERN TRENDS IN
CONSTRUCTION INDUSTRY.
Speaker : Dr Anil Joseph,Structural Consultant and Managing Director of Geo Structural Pvt.Ltd (Ernakulam, Kerala) on May 16, 2020 3.00 PM
Published onApr2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Robotics AI and ML ATRADICS
A Seminar on Robotics, Artificial Intelligence and Machine learning by Rahul P B Founder and CEO INKER ROBOTICS.
Published onMar2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Vastu Vidya
Seminar on Vastu Vidya by Prof.Dr. P V Ouseph
Published onMar2020
Conference at COLLEGE OF ENGINEERING PERUMON
International Conference on Innovations in Science and Technology for Sustainable Development 2020
Greeting from the College of Engineering Perumon! Department of CSE and Department of ME of College of Engineering Perumon are jointly organizing ' International Conference on Innovations in Science and Technology for Sustainable Development' ( ICISTD 2020) from 29th to 30th of April 2020. Papers are invited from various engineering and science streams for the same. Accepted papers will be published in Scopus indexed/ UGC approved journals. For details visit http://icistsd.perumonec.ac.in
Published onMar2020
Conference at JAWAHARLAL COLLEGE OF ENGINEERING AND TECHNOLOGY
National conference on Latest Engineering Research and Applications
Department of Aeronautical Engineering, Civil Engineering and Mechanical Engineering, Jawaharlal College of Engineering and Technology, Lakkidi, jointly organizing "National conference on Latest Engineering Research and Applications (NCLERA)" on 17th and 18th April 2020. It covers the latest research areas related to Aeronautical, Mechanical and Civil Engineering.
I request you to go through the brochure attached with this mail for details regarding registration and paper submission.
E-Quark is a National Level Project Expo conducted with the idea to highlight various opportunities and challenges in different sectors of the society. It is a platform to actively involve, interact and enhance your knowledge.
You have an idea, a project to present - this is where you need to be. So come along and become a part of this technical bonanza. Register yourself by clicking on the link below. Exciting prizes await you...!
Registration fee is 300/- only.
Click on the link below and join us equark.cce.edu.in
Conference at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
Call for the Papers ABACon'20 :"National Conference on Innovations in Computing"
Department of Computer Science and Engineering is organizing ABACon'20- " National Conference on Innovations in Computing" during 17th and 18th April 2020 at Sahrdaya College of Engineering and Technology campus, Kerala, India.
The main objective of the Conference is to provide a platform for discussing and exchanging views on various aspects of all computing concepts. Participants will have an opportunity to do discussion and oral presentation on theory, implementations and research applications. The ABACon'20 is the best forum for the research scholars B.Tech, M.Tech students and faculty members to present the research work in their area.
We shall be glad to receive papers from your institution/organization on or before 01/04/2020
Registration Details
Academicians-Rs 600/-
PG/Research Scholars-Rs 400/-
UG Students- Rs 200/- per student
The conference is intended to touch upon some of these topics:
1. Big Data
2. Artificial Intelligence
3. Deep learning
4. Machine Learning
5. Cloud Computing
6. IoT
7. Bioinformatics
8. Image and Pattern Recognition
9. Computer Networks
10. Augmented /Virtual Reality
11. Embedded System
12. Green Computing
13. High Performance Computing
14. Intelligent Networking
METANOIA 20 - National Conference on Confluence of Technologies (NCCT)
It gives us immense pleasure in extending you a very warm invitation to attend the 3rd Annual National Level Technical Conference to be held at KMCT COLLEGE OF ENGINEERING, Calicut, Kerala on April 3rd & 4th 2020. Departments of Electrical, Electronics, Computer Science, Applied Electronics and Information Technology will jointly organize a Two day National Level Technical Conference focused on the theme ?METANOIA 20 ? National Conference on Confluence of Technologies (NCCT)? .
This National Symposium is a forum to bring researchers, academicians and industry professionals to share knowledge and research contributions in the evolving technologies related to the Engineering. The Major aim of this Symposium is to provide a platform for all researchers, academicians, research students and industry professionals to present their quality research work. Metanoia 20 invites papers in the areas related to electrical, electronics, instrumentation, computer science and information technology. The details are given in the brochure.
IEDC cell of M.G. College of Engineering is conducting a hands -on workshop on "ROBOTICS" on 2nd and 3rd of March 2020. The resource person is Mr.Vivek U S form UKFCET, who is the Head of R & D and innovation and digital transformation in the same college.
Conference at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
IEEE International Conference
ACCTHPA 2020, the fifth International Conference on "Advanced Computing and Communication Techniques for High Performance Applications (ACCTHPA)" is a prime conferences which intends to provide a forum that brings together the researchers from academia and industry to convene and swap over the ideas and recent research work on the High Performance Applications. Scheduled on July 2-4, 2020 at Federal Institute of Science And Technology (FISAT), Cochin, Kerala, India, ACCTHPA is the fifth edition of this conference. ACCTHPA is organized in association with IEEE Kerala Section and all accepted and presented papers will be published in IEEE Xplore.
Published onFeb2020
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Seminar on GFRG
A seminar on GFRG panels conducted by dept of Civil Engineering.
Published onFeb2020
Conference at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
International Conference SECON2020
Department of Civil Engineering, FISAT, Mookkannoor is organizing fourth annual conference “International Conference on Structural Engineering and Construction Management SECON-2020” during 14th and 15th May 2020, in association with KTU, SPRINGER, ASCE, IEI-Kochi Local Centre, ICI-Kochi Chapter, ISTE-FISAT Chapter and PARADIGM, Kochi. All selected papers will be published in SCOPUS Indexed SPRINGER publication “Lecture Notes in Civil Engineering”. For more details visit www.secon2020.fisat.ac.in
Conference at COLLEGE OF ENGINEERING KARUNAGAPPALLY
2020 IEEE International Power and Renewable Energy Conference (Technically sponsored by IEEE IAS)
INDIA'S FIRST IEEE Industry Applications Society CLUB OF 6 TECHNICAL PAPER CONFERENCE - International Power and Renewable Energy Conference 2020 (IPRECON) is scheduled on 24th, 25th and 26th July, 2020 Organised by IEEE IAS Student Branch Chapter College of Engineering Karunagappally, Kerala, India
International Power and Renewable Energy Conference (IPRECON 2020) is an integrated crate for the young students and professionals all over the world to embed the technical quality. The conference emphasizes the international environment for sharing of knowledge in our domains, connect yourself to the industrial professionals and multi disciplinary discussion on the latest advances. The conference has session from over our diverse technical committees which cover the complete spectrum of industrial applications.
Focus area of the conferences are Power Electronic Converters and Control Systems, Wide band gap devices, Electric machines and drives, Renewable energy Resources, Distributed generation and Grid Interconnection, Electric Vehicles, Energy Storage & Battery Charging Techniques, Power Quality issues, Micro Grid & Smart Grid, Lighting technologies, Energy Policies & Standards. All Presented papers will be published in IEEE Xplore.
Important Dates:
Paper Submission Starts : 5th December 2019
Paper Submission Closes : 15th February 2020
Notification of Acceptance : 1st April 2020
Final Camera-ready Paper : 1st May 2020
More details of IEEE IPRECON 2020 are available at www.iprecon2020.org
Work Shop at SNM INSTITUTE OF MANAGEMENT AND TECHNOLOGY
2 Days National Level Workshop on BLOCK CHAIN
2 DAYS WORKSHOP ON PRIVATE BLOCK-CHAIN
Details :-
? : Registration link : http://bit.ly/Block_chain_workshop
Program Venue : Alumni Association hall,
1st floor,
Administration block,
SNMIMT, Maliankara, N Paravur
Program Date: Tuesday & Wednesday, February 18th-19th 2020
?: 10:00 am - 4:00 pm
Limited seats available for selected members only.
Published onFeb2020
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
METAMES Automated Design & Analysis
A workshop on Solid Works and Introduction to Ansys. This workshop will benefit the students to design and analyse different projects that they are going to undertake in their coming semesters. The event is organised jointly by the Dept. of Mechanical Engineering and METAMES Dept.Association and sessions handled by experts from CADD Centre Kodungallur.
Published onFeb2020
Seminar at SARABHAI INSTITUTE OF SCIENCE AND TECHNOLOGY
II INTERNATIONAL CONFERENCE ON INNOVATIVE TRENDS IN SCIENCE AND TECHNOLOGY(ICITST-2020)
Sarabhai Institute of Science and Technology (SIST) and TECHOWN hosting the 2nd International Conference on Innovative Trends in Science and Technology (ICITST – 2020) to be held on 26th March 2020 in Trivandrum, Kerala. ICITST 2020 Conference provides a great platform for the people who are enthusiastic at sharing their innovative ideas related to technology and provide an excellent international forum for sharing knowledge and their results in theories, technical thesis as a part of their research and elaborate their excellence with various dignitaries, multinational companies and gain the precious suggestions from real time industries, methodology and Applications of Computing. We are pleased to invite you to submit your research paper for presentation at this conference.
Seminar at SARABHAI INSTITUTE OF SCIENCE AND TECHNOLOGY
National Seminar on Technological Advancements in Plastics Waste Utilisation and Processes(STAPWUP-2
The seminar intends to bring together Scientists and Technologists involved in the field for sharing interacting, and arriving at practical and easy solutions and making recommendations to Waste Plastics Management.
Published onFeb2020
Work Shop at M G COLLEGE OF ENGINEERING
ELECTRA-2020
Department of EEE Association 'ELECTRA' presents two days hands on training workshop on MATLAB/SIMULINK on February 11th and 12th, 2020
Published onFeb2020
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
TRIUMPH WORKSHOP @ Toc H AS PART OF ADVAY 2020
The Department of Mechanical Engineering at Toc-H Institute of Science and Technology is conducting an exclusive Technical workshop by TRIUMPH KOCHI on February 15th as part of the college Techno-cultural fest- ADVAY 2020. The cutting edge technologies used by TRIUMPH will be explained in the session along with a brief history of TRIUMPH. The workshop will contain interactive sessions where students can clear their doubts regarding career opportunities in TRIUMPH and latest motorcycle technologies. There will be an opportunity for the students to see and experience TRIUMPH’S latest motorcycles. This event will also provide a platform for all the motorcycle enthusiasts to know more about the technological advancements and developments that have taken place in the motorcycle industry during the past years. The venue of the workshop will be RAMANUJAN hall of ARYABHATA block in TIST campus. The workshop will be conducted in the morning session from 9:00am – 12:00pm and will be followed by a TechQuiz afterwards. Cash prizes will be awarded for the winners of the quiz. The students will be eligible for securing activity points through this workshop. The registration fee for this event will be Rs 600.
For more information, please contact: ATHUL ANTONY: 9074785478 AKHIL STEPHEN: 9495447573 ELVIN ROY: 8589012526
Conference at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
3rd Annual Conference Series titled Engineering Education for Facing the Future (E2F2′19)
We are happy to announce that the 4th Annual Conference Series titled “Engineering Education for Facing the Future (E2F2′20)” organized by the Sree Buddha College of Engineering is scheduled during 4th and 5th May, 2020. E2F2′20 will consist of the following 5 national conferences covering different branches of engineering:
• National Conference on Biotechnology Research: Innovations & Opportunities (BRIO’20)
• National Conference on Sustainable Practices in Civil Engineering (SPICE’20)
• Recent Trends in Advanced Computing Technologies (RTACT’20)
• National Conference on Innovative Trends in Electrical, Electronics and Communication (ITEEC’20)
• Recent Advances in Materials, Manufacturing and Thermal Sciences (RAMMTS’20)
The research papers reviewed and accepted for presentation in each conference will be published as e-book proceedings having ISBN (View the E2F2’18 e-book proceedings at: goo.gl/KZFHC3 ; and E2F2’19 proceedings at: bit.ly/2uhCCYd).
The poster of E2F2’20 Conference Series with contact details and important dates is attached. I request you to kindly publicize above event among the faculty/ research scholars and P.G. students of your institution and encourage them to actively contribute research papers for the conference.
Department of Electrical and Electronics Engineering, College of Engineering Vadakara organizing a three day workshop on Converters and Battery Charging from 17/02/2020 to 19/02/2020. Interested faculty and students can attend the workshop. For registration contact Nithin T, HOD,EEE (9446848483) and Hemanth Jaison , Coordinator (9995199106). The program is sponsored by TEQIP II.
Two day Techfest - TECHFIESTA 2020 : TRIKA 2020 by ECE Department & HAXXWORKS 2020 by CSE Department on 14th & 15th February 2020.
TRIKA 2020 by ECE department comprises of a TECHNICAL CONFERENCE, WORKSHOP with HANDS-ON, and Competition events such as LINER, BE THE STARK, RESIST THE FLOW, ELECTRICUIT, PITCH PERFECT, QURIOSITY.
HAXXWORKS 2020 by CSE Department comprises of Sec?Con, CTF(Capture The Flag), Radianz
Published onFeb2020
Seminar at KMCT COLLEGE OF ENGINEERING
Lecture Program
A one day lecture program on” NANOELECTRONICS” is organized by Department of ECE and AEI, KMCT College of Engineering, Kozhikode on 13-02-2020 (Thursday). The talk is purely based on the KTU syllabus, EC402 Nanoelectronics and AE468 Nanoelectronics.
For Registration, use the link- https://forms.gle/Qmqcvx8MY4EsUFjs7. For more details contact: Mr. Keshavan Namboothiri T (9400697367)
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Nirupa
Seminar on students motivation by Mrs.Mary Kurian (Motivational speaker and Psychologist).
The programme postponed from 01/02/19.
Published onFeb2020
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
staad pro v8i
Two day workshop on staad pro v8i on 5th and 6th of February 2020.
Published onFeb2020
Work Shop at PROVIDENCE COLLEGE OF ENGINEERING
TWO DAYS NATIONAL WORKSHOP CUM ZONAL COMPETITION 2020 ON BUILD HUMANOID WALKING ROBOT
Participants will learn to build a two-legged robot that will have six degrees of freedom with a hip, knee & foot. By developing this two-legged walking robot project, you will practically learn about microcontroller architecture & its programming, working of the servo motors - which acts as actuators & the programming logic behind the human's walking action.
Published onFeb2020
Work Shop at VEDAVYASA INSTITUTE OF TECHNOLOGY
One Day Workshop by Indian concrete Institute at VVIT
One Day Workshop on Concrete Mix Design using IS10262 : 2019 & Emerging building Products In construction Industry
One Day Workshop by Indian Concrete Institute - VVIT
One Day Workshop on Concrete Mix Design using IS10262:2019
Published onJan2020
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
2-day workshop on Blockchain at Vidya Academy of Science and Technology, Thalakkottukara, Thrissur.
Vidya Center for AI & Research (VCAIR) in association with leadingindia.ai presents its latest initiative, a 2-day workshop on Blockchain at Vidya Academy of Science and Technology, Thalakkottukara, Thrissur.
Date: February 1 & 2, 2020
The session will be handled by professionals from Leadingindia.Ai (Bennett University, New Delhi)
Registration Fee for Students & Faculty: Rs.1200
Registration Fee for Professionals & Others: Rs.1500
Register now:
https://bit.ly/vcair-blockchain
Computer Society Of India - VVIT chapter is organizing a 2 days Faculty Development Programme on 1 and 3rd February 2020. Any person, from any discipline involved in teaching can attend this
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
3-D Printing Workshop- FAB FEST
Department of Mechanical Engineering at Toc H Institute of Science and Technology in ssociation with ASME and IEDC local chapters present FAB FEST in TIST Campus on 24th and 27th January 2020.
The workshop will provide hands on experience and you could print your personalized design. The whole workshop is done on a structured learning platform. The designs printed by the student can be taken away.
The proposed 3D printing workshop accompanied with an industrial visit to FAB LAB Kalamassery will give the participants an immersive experience into 3D printing and its opportunities in the industry. FAB lab visit will expose students to industrial scale 3D printers and advanced machines, which is an opportunity for students to network with lab officials and make collaborative efforts in their projects and research.
The tentative date of industrial visit is scheduled on 5th February 2020.
For more information please contact
Chacko. G. George : 9846102590
Arun. Joy : 9562363731
Conference at MUSALIAR COLLEGE OF ENGINEERING AND TECHNOLOGY PATHANAMTHITTA
National Innovations on Innovations in Computing and Communication Technologies
National Conference ICCT20 aims to explore the advanced ideas and technologies in a wider range in the form of presentation and discussion with eminent personalities in terms of experience and experts.The innovations in computing and communications technologies will be explored in the conference.
Work Shop at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
KTU sponsored FDP on Power Quality Issues in Power Generation, Transmission and Distribution
Nehru college of engineering & Research centre, pampady, kerala , Electrical and Electronics Engineering department conduct a FACULTY DEVELOPMENT PROGRAM ON POWER QUALITY ISSUES IN POWER GENERATION, TRANSMISSION AND DISTRIBUTION (Sanctioned by APJ Abdul kalam university) dated from 27th Jan 2020 to 31st Jan 2020.
International Conference on Technological Convergence in Engineering, Energy, and Sustainability
Greetings from the Organizing Committee of ?International Conference on Technological Convergence in Engineering, Energy, and Sustainability? (ICTCEES-2020)
I am pleased to inform you that the Department of Mechanical Engineering, Vimal Jyothi Engineering College is organizing an ?International Conference on Technological Convergence in Engineering, Energy, and Sustainability? (ICTCEES-2020) during 16th - 17th of May 2020.
This conference provides a platform to address, exhibit and explore the knowledge of Science, Engineering, and Technology. It provides a unique opportunity to meet and discuss with Industry Experts, Academia Experts, R&D Personnel, Researchers, Engineering students, Arts and Science students in the field of Advanced Science and Technology.
We invite full paper and active participation from yourself, your Colleagues, Research Scholars and Students of your Institute.
I kindly request you to circulate, display in the notice board and share the information about the ICTCEES-2020 International conference to your Faculty members, Research Scholar, PG & UG students, and friends.
Further details about the ICTCEES-2020 can be seen in the brochure attached with this email or visit www.ictcees.vjec.ac.in
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
Faculty Development Programme On ADVANCES IN BIO-ENGINEERING
The proposed FDP on “Advances in Bio- Engineering” aims at building a concrete platform for core engineers to explore the scope of engineering in biological related studies. The concept of interdisciplinary science and engineering is now a trademark for researchers. More and more ambitious researchers are inquisitively finding application of engineering tools, mechanisms, machines etc in bio - related studies. At this junture, an intense and detailed look into the field of Bio - Engineering is the need of the hour.
The FDP will focus on major topic related to bio-engineering which in- clude implant design and manufactur- ing, bio-materials, characterization, bio-ploymers,bio-medical engineering, bio-chemistry, bio-mechanics etc.
Work Shop at SCMS SCHOOL OF ENGINEERING AND TECHNOLOGY
Workshop on "The Art of Technical Writing and Publishing in the Pursuit of Academic Excellence?
Three day workshop on "The Art of Technical Writing and Publishing in the Pursuit of Academic Excellence? during January 13th to 15th, 2020.
Published onDec2019
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
AICTE sponsored FacultyDevelopment Programme on Computer Algebra Systems during 30 Jan 2019 - 11 Jan
The MCA Department of Vidya Academy of Science and Technology, Thrissur - 680501, Kerala, is organising an AICTE sponsored Faculty Development Programme on Computer Algebra Systems during 30 Jan 2019 - 11 Jan 2020. We welcome you to Vidya Academy of Science & Technology to participate in the FDP.
The NSS unit (Unit No:515) and PROMEA (Mechanical Engineering Association) of Providence College of Engineering, Chengannur has launched a design competition based on the theme "CLEAN INDIA" under two categories in association with AUTODESK & VINSYS.
1. DESIGN A LOW-COST PORTABLE PLASTIC MANAGEMENT SYSTEM FOR RESIDENTIAL PURPOSE -for school students.
Software used: AUTODESK TINKERCAD
First prize: Rs.30, 000/- + AUTODESK ASSURED GIFTS + AUTODESK CERTIFICATES.
Second prize: Rs.15000/-+AUTODESK ASSURED GIFTS +AUTODESK CERTIFICATES.
2. DESIGN A LOW-COST PORTABLE ORGANIC WASTE MANAGEMENT SYSTEM OTHER THAN VERMI COMPOST FOR RESIDENTIAL PURPOSE -for Polytechnic and Engineering college students.
Software used: AUTODESK FUSION 360.
First prize: Rs.50, 000/- + AUTODESK ASSURED GIFTS +AUTODESK CERTIFICATES.
Second prize: Rs.25, 000/- +AUTODESK ASSURED GIFTS +AUTODESK CERTIFICATES.
The competition will be conducted under three levels:
a) Initial submission at 14 districts(Last date of the first level:15th Jan 2020)
b) BOOTCAMPS at 7 districts. (Last date of the Second level:31st Jan 2020)
c) FINALE at PROVIDENCE College of Engineering, Chengannur.(07,08 Feb 2020)
Work Shop at JAWAHARLAL COLLEGE OF ENGINEERING AND TECHNOLOGY
FDP on DISTRIBUTED GENERATION & SMART GRID
For economic development of any country, energy is one of the major inputs. Number of industries, vehicles domestic users has been increased by a large number in last decade, this in turn led to increase in global energy consumption also. Majority of energy is used in form of electricity & huge amount of electric energy is required by world to fulfill the daily demand. Development and integration of DG systems to utility grid become a promising area of research.
Smart grids are non-conventional, small scale, low voltage CIIP supply networks designed to address electrical and heat demands of a small community. Smart grid is a corporation of different loads and DG systems at distribution voltage level, hence it is an active distribution network.
Work Shop at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
KTU Sponsored FDP on Energy Auditing and Management
The Electrical and Electronics Engineering Department of Mar Baselios Christian College of Engineering and Technology, Peermade is organizing a KTU Sponsored FDP on Energy Auditing and Management(Based on the APJ AKTU Syllabus) from 7th January 2020 to 11th January 2020.
More Details: Mr. Resmara S, 9446224393
Ms. Vineetha P Joseph, 9447765345
Work Shop at JAWAHARLAL COLLEGE OF ENGINEERING AND TECHNOLOGY
FDP on Coastal Protective Measures & its Importance in KERALA
The FDP intended to provide participants an overview of various principles in 'Coastal Protective Measures' which is useful course foe faculty, research scholars and PG Scholars in Civil Engineering
A voyage from shallow to deep in Machine Learning: Prospective and Challenges in research
It gives us immense pleasure to announce that we are organising a TEQIP II sponsored Research Colloquium on ?A voyage from shallow to deep in Machine Learning: Prospective and Challenges in research? from 31st December 2019 to 1st January 2020.
Published onDec2019
Conference at COLLEGE OF ENGINEERING PERUMON
RECENT TRENDS IN NETWORKING AND CLOUD COMPUTING
FDP
On
“RECENT TRENDS IN NETWORKING AND CLOUD COMPUTING”
Sponsored by
TEQIP II
16 th-18 th DECEMBER 2019
Work Shop at MOHANDAS COLLEGE OF ENGINEERING AND TECHNOLOGY
Three days faculty Development Programme
Department of Biotechnology & Biochemical Engineering and department of Civil Engineering of Mohandas College of Engineering is organizing a 'Faculty Development Programme on 'Bio- Engineering & Solid waste Management (BESWM-19), sponsored by KTU
Faculty Development Programme on ' Energy and Power Quality Audit Methodologies'
The Department of Electrical and Electronics Engineering(NBA accredited during 2019-21) is organising a Faculty Development Programme on ' Energy and Power Quality Audit Methodologies' sponsored by TEQIP II four funds from 11-13 December 2019.
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY TECHNICAL CAMPUS
FDP on Recent Advances in Composite Materials
Vidya Academy of Science and Technology Technical campus, Kilimanoor is organizing 3 day Faculty Development Programme on "Recent Advances in Composite Materials -RACM'19" during 16th to 18th December 2019. This FDP is focusing Mechanical stream faculty members of KTU affiliated institutions to understand the concepts, recent advances, researches and techniques in Composite materials.
3 Day FDP on Tools for Machine Learning Application Development
Three-day Faculty Development Programme (FDP) on "Tools for Machine Learning Application Development" is being conducted for the faculty members from various disciplines of Engineering. The workshop is intended to equip faculties to support students as mentors for the development of ML-based systems, which include data processing & its representations, building basic ML models to address certain scenarios and introduction to cloud infrastructures
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Faculty Development Programme on Applications of Advanced Mathematics in Engineering? for teachers
We are pleased to inform that ISTE VAST chapter in association with the Department of Applied Sciences, Vidya Academy of Science and Technology (VAST), Thrissur is conducting a Faculty Development Programme on ?Applications of Advanced Mathematics in Engineering? for teachers in Engineering colleges during 5- 6 December 2019
IEEE Malabar Sub Section is conducting a One Day Workshop on Deep Learning at KMCT College of Engineering on 18th December 2019. We cordially invite IEEE professional members, Faculty members and interested students to be part of this workshop.
Department of Electronics and Communication Engineering of Jyothi Engineering college is organizing 14 days AICTE sponsored FDP on WIRELESS COMMUNICATION NETWORKS & SIGNAL PROCESSING from 4 DEC 2019 to 17 DEC 2019.The programme is fully sponsored by AICTE. Wireless communication networks and signal processing are the inevitable areas of communication engineering. The objective of the programme is to enhance the research and teaching capabilities of the participants in these areas. In this FDP, subject experts from esteemed academic institutes and industry will share their experiences with the participants. Emphasize is given on hands-on sessions using open-source tools and MATLAB.
Registration link : https://tiny.cc/jeccfdp
Last date of online registration: 27/11/2019
Intimation of selection : 30/11/2019
Brochure of the programme is attached here
Department of Civil Engineering, Jyothi Engineering College, Cheruthuruthy, Thrissur is organising a KTU sponsored faculty development programme (FDP) on "Repair and Rehabilitation of Structures" from 2nd December to 6th December 2019 in our Holistic Institution. The importance of repair and rehabilitation of existing structures has grown significantly in recent years as it helps to reduce the investment and time than in new construction. Apart from that, it helps in optimisation of resources and protection of environment.
The programme is open to all faculty and research scholars from KTU affiliated Engineering colleges.
The last date for registration is on 27th November 2019 and can be done online through the link
https://forms.gle/DmVpmffWF7Lq8yKS7
Brochure for the same is attached
Three Days Faculty Development Program for Student Induction Program for AICTE approved institutions
s you aware, AICTE has taken number of measures for improving the quality of technical education in the country. Student Induction Program(SIP) for students at the beginning of their course is one such initiative. Its purpose is to make the students comfortable in the new environment and expose them with various facets of life. SIP is now a part of the Model Curriculum of Undergraduate Studies in Engineering & Technology and all universities / institutions related to technical education have been advised to adopt the Model Curriculum since academic session 2018-19.
As the induction program is mandatory for every student, it is utmost importance that the faculty members / teachers are equipped and refreshed to conduct the induction program for students. Therefore, 3 days Faculty Development Program for Student Induction Program for AICTE approved institutions is organized by AICTE @ Mangalam College of Engineering, Ettumanoor, Kottayam, Kerala on 27th ? 29th November, 2019.
Published onNov2019
Work Shop at JYOTHI ENGINEERING COLLEGE
KTU Sponsored FDP on “Modern AICTE Curriculum-Based Engineering Education – Pedagogical Issues and O
With the support and funding from APJ Abdul Kalam Technological University, EEE department of Jyothi Engineering College is organizing an FDP on “Modern AICTE Curriculum-Based Engineering Education – Pedagogical Issues and Outcome-Based Learning” from December 2nd to 6th 2019. Eminent Professors from NITs/Government Institutes and BMS College of Engineering, Bangalore will be handling the Sessions. Since NBA, accreditation will be mandatory for all Engineering Colleges from the near future and since the Outcome-Based Education framework has already been added to the academic audit of our University, this FDP will provide valuable support to the institutes affiliated under KTU. For Registration Click on to https://tiny.cc/cbee
Inauguration of ECE Department Association by Chief Guest Sajna Vinish (Asst.Prof, Music Dept, Womens College, TVM) followed by a seminar on the topic "ROBOTICS" by Mr. Lithin K Devisia, Technical Leader, Network Systems, TVM.
Inauguration of EEE Department Association by Chief Guest Sajna Vinish (Asst.Prof, Music Dept, Womens College, TVM) followed by a seminar on the topic "ROBOTICS" by Mr. Lithin K Devisia, Technical Leader, Network Systems, TVM.
Work Shop at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
NSITE 2019-National Level Tech Fest
Nehru Group of Institutions, Kerala is organizing National Level Technical Fest “Nehru Science Innovation and Technology Expo- NSITE 2K19 on 19th and 20th November 2019 at Nehru College campus, Pampady and Jawaharlal College campus, Lakkidi. The aim of the Expo is to exhibit the innovative talents and to promote the scientific temperament of students.
NSITE is the largest National Level Inter Collegiate Technical Fest that provides students a platform for exhibiting their impressive and innovative projects. NSITE marked its beginning in 2011 and got improved over the years providing more opportunities to young scholars. NSITE2K 19 will throw open doors to Engineering students from all over India to participate, exhibit and compete with their inventions & innovations in major Engineering streams of Aeronautical, Architecture, Automobile, Civil, Computer Science, Information Technology, Electrical and Electronics, Electronics and Communication, Mechanical and Mechatronics. The NSITE serves as a diving pool for the engineers of tomorrow with a diverse range of competitions and unparalleled technical extravaganza. Designing coding, paper/project presentation, gaming and brainstorming are some of the few nerve wrecking events that offer a challenge to the technical acumen of the participants.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
One-day workshop on the topic DESKTOP CNC MILLING
ASME TIST student chapter is conducting a one-day workshop on the topic DESKTOP CNC MILLING conducted by TRYASRA LABS at Toc H Institute of Science and Technology.
Students attending the workshop will get an exposure to:
3D modelling and subtractive manufacturing
CNC G-codes and various milling operations.
Hands-on experience on the machining process.
Students attending the workshop will get two certificates and KTU activity points.
FEES: 400 LOCATION: Toc H Institute of Science and Technology, Arakkunnam
VENUE: ME seminar hall, V-413 (Visveshwarya block)
DATE: November 14th, 2019 (10:00AM onwards)
A design competition based on the workshop will also be conducted and a separate certificate will be issued to the participants. There will also be a quiz competition for which another separate certificate will be issued for the participants
For registration, use the link below
https://bit.ly/asmetist
For more details, contact
9605735454 (Alex)
9605488905 (Biswa)
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Computer Aided Drawing
Two Day AUTOCAD workshop for S3 CE students organised by Dept. of Civil Engineering. Scheduled earlier on 3rd and 4th of October and postponed to 11th and 12th of November.
Published onNov2019
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
ARC 19
Technical Workshop by Sri. Ramesh C K Data Scientist (DRDO) organised by Electronics and Electrical Engineering Association.
Published onNov2019
Conference at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
International Conference
International Conference on Advances in Computing and Communications
Published onNov2019
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
A Counseling session on Mobile Phone overuse and addiction
A Counseling session on Mobile Phone overuse and addiction by Dr.Jayaraj, Asst.Professor, MG College (Department of Physiology), Thiruvananthapuram
Published onNov2019
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
Engineer's Day Celebration 24-10-2019
Institution Of Engineers Students Chapter Department of Civil Engineering conducted EngineersDay celebration on 24th October 2019.
Er.Sivadasan (President ,IEI Kollam local chapter) inaugurated the function.A technical session was handled by Er.S.Haris(Director,Kerala Rural Development and Sanitation Agency) on the topic Introduction to water supply. Engineering. Prof.Abibasheer (HOD .Civil) conducted a Quiz on Engineers day.
Published onOct2019
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
MAPATHON
Workshop MAPATHON , detailed digital mapping training for all the Engg. College NSS students of Ernakulam District.
Published onOct2019
Seminar at M G COLLEGE OF ENGINEERING
COMPAS-2019
It is an immense pleasure that M G college of Engineering, Computer science & Engineering department Association (COMPAS) is organizing a seminar on the topic "Introduction to Artificial Intelligence, Machine Learning and Deep learning" on 25-10-2019 (Friday).
Published onOct2019
Work Shop at MES COLLEGE OF ENGINEERING, KUTTIPPURAM
AICTE Training & Learning (ATAL) Academy 5 day FDP on 3D printing & Design
Centre for Multidisciplinary Research, MES College of Engineering, Kuttippuram is organising a five day Faculty Development Program on 3D printing & Design sponsored by AICTE Training & Learning (ATAL) Academy. The workshop is scheduled to be conducted from 2nd to 6th December 2019. We cordially invite members of faculty to be part of this FDP.
Key areas:
3D Printing (Additive Manufacturing)
CAD for Additive manufacturing
STL conversion, Slicing & G-Code generation
Materials
Additive manufacturing equipment
Post processing: Requirement & Techniques, Product quality
For more details, visit www.mesce.ac.in
Dr. Suneesh P U : 9895147713 suneeshtvr@gmail.com
Prof. Shine K : 9446344648
Prof. John Paul : 9895829713
Published onOct2019
Work Shop at MODEL ENGINEERING COLLEGE
Excel 2019 -The National level Techno-Managerial Symposium on Model Engg College,Cochin 2019NOV 8-10
Excel 2019 is the National level Techno-Managerial Symposium hosted by Model Engineering College, Ernakulam. Excel continues to align itself with the motto ?Inspire, Innovate, Engineer?. Excel boasts of a 19 year old legacy, with the 20th edition being conducted this year on November 8, 9, 10.
Excel conducts a variety of technical, managerial and non-technical competitions, reaching out to every department. Several talk events and workshops are also hosted during Excel.
For more details, visit www.excelmec.org
Work Shop at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
Two Days Workshop on Machine Learning & Artificial Intelligence on 11th and 12th October 2019
Two Days Workshop on Machine Learning & Artificial Intelligence on 11th and 12th October 2019
Published onOct2019
Work Shop at SCMS SCHOOL OF ENGINEERING AND TECHNOLOGY
"KTU - NGO INTERNSHIP 2019" : ONLINE INTERNSHIP FOR KTU STUDENTS
“KTU – NGO INTERNSHIP 2019” IS AN ONLINE INTERNSHIP EVENT HOSTED BY “ B BUSINESS INTERNATIONAL”, A REGISTERED CLOSED END INVESTMENT COMPANY .
KTU - NGO INTERNSHIP PROVIDES YOU ONLINE TRAINING IN BUSINESS & ENTREPRENEURSHIP ,PROFESSIONAL JAVA PROGRAMMING ,GERMAN LANGUAGE AND MANY OTHER MOOC'S .YOU WILL ALSO RECEIVE VOLUNTEERING OPPORTUNITIES AT VARIOUS NATIONAL AND INTERNATIONAL ORGANIZATIONS . BY THE TIME OR AFTER COMPLETING GRADUATION INTERNS WILL BE PROVIDED WITH PLACEMENT TRAINING AND ASSISTANCE FOR EMPLOYMENT AT OUR COMPANY AS WELL AS OTHER MULTINATIONAL COMPANY'S. DON'T MISS THIS WONDERFUL OPPORTUNITY . CHECK OFFICIAL NOTIFICATION FOR FURTHER DETAILS .#### FOR REGISTRATION , VISIT ktungointernship2019.blogspot.com OR GO TO https://www.townscript.com/e/ktu-ngo-internship-303041 OR YOU CAN SIMPLY SEARCH FOR "KTU NGO INTERNSHIP" ON GOOGLE. YOU CAN FIND THE PAGE NAMED " ktu ngo internship - Townscript " , WHICH IS THE REGISTRATION WEBSITE FOR THE EVENT .
AICTE ATAL Five day Workshop on "Cyber Security: Advances and Future Directions"
Department of CSE and ECE, College of Engineering (CEK), Kallooppara, Kerala is organizing a Five day Workshop on ?Cyber Security: Advances and Future Directions?, sponsored by AICTE Training and Learning (ATAL) Academy. The workshop is scheduled to be conducted from 21st to 25th October 2019.
We cordially invite you and your colleagues to our college to be a part of this Workshop.
Broad areas covered are:
Cyber Security, Cryptography, Network Security, Malwares and Ransomwares, Ethical Hacking, Web Services and Security, Cyber Laws and Case Studies, Cyber Forensics, DOS and DDOS attacks, Social Engineering, Steganography.
For more details and registration visit: www.cek.ac.in
Contact:
Mob: 9496108494, 9447402630
Email: shanavazkt@cek.ac.in, rajkumar@cek.ac.in
fdp@cek.ac.in
Work Shop at SCMS SCHOOL OF ENGINEERING AND TECHNOLOGY
SAE Auto Workshop 3.0
Department of Automobile Engineering, SCMS School of Engineering and Technology, Cochin in association with SAE INDIA Collegiate club of SCMS & Innovation and Entrepreneurship development Centre – IEDC (Supported by Kerala Startup Mission) is organizing a 2-day Auto Workshop exclusively for Mechanical Engineering / Automobile Engineering students on September 26 & 27, 2019 (Thursday & Friday) at SCMS School of Engineering and Technology, Karukutty Campus. https://www.scmsgroup.org/sset/auto-workshop3.0
Work Shop at SCMS SCHOOL OF ENGINEERING AND TECHNOLOGY
Two day QGIS Workshop
Department of Civil Engineering, SCMS School of Engineering and Technology, Cochin in association with Innovation and Entrepreneurship development Centre ? IEDC (Supported by Kerala Startup Mission) is organizing a 2-day QGIS Workshop exclusively for Civil Engineering students on September 26 & 27, 2019 (Thursday &Friday) at SCMS School of Engineering and Technology, Karukutty Campus.
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Curbing the menace of Ragging
Legal Awareness Programme organised by the college Paravur Taluk Legal Service Cell.
Seminar on the menace of ragging and traffic rules awareness.
Published onOct2019
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
5-day KTU sponsored FDP on Emerging Trends in Sustainable Developments in Transportation Engineering
Toc H Institute of Science & Technology, Arakkunnam, Ernakulam (TIST) is an ISO 9001:2015 certified, NAAC accredited institution with Civil Engineering Department as one among four departments offering NBA accredited UG programme.
It is our pleasure to inform you that?Department of Civil Engineering,?TIST, is conducting a 5-day?Faculty Development program on??Emerging Trends in Sustainable Developments in Transportation Engineering??from?23rd September 2019 to 27th September 2019, ?sponsored?by?APJ ABDUL KALAM?TECHNOLOGICAL UNIVERSITY. The brochure of the course is attached along with this mail for your kind perusal. It is requested to forward this mail to your friends and colleagues who may be interested in this course topic.
We request you to ensure maximum participation of faculty members from your esteemed institution for this FDP.
Please note that Faculty members from KTU Affiliated institutions can register for the course and the registration?fee?will be reimbursed on completion of the Course.??
Registration link is as given below.
https://forms.gle/cnLpymaKkLpThHQT6
The last date for registration is extended to 17th September 2019. Intimation to Confirmed Participants shall be intimated through mail by 20th September 2019.
?Please feel free to contact us in case of any clarifications required:?
Prof. Lathi Karthi (HOD, CE & Convenor of FDP) : 9746163319
Dr. Vasudev R (Assoc. Prof. & Course Coordinator) : 8304897606
Conference at MAR BASELIOS COLLEGE OF ENGINEERING AND TECHNOLOGY
Scopus indexed Springer International ConferenceComNet2019
The Department of Electronics and Communication Engineering is organizing International Conference on Communication Systems and Networks (ComNet 2019) in association with University of Dayton, Ohio. ComNet 2019 will be held during 12th and 13th Dec 2019 at Mar Baselios College of Engineering and Technology, Thiruvananthapuram. This conference aims at bringing together academic scientists, leading engineers, industry researchers and scholar students to exchange and share their experiences and research results about Advanced Communication Systems and Networking Technologies and discuss the practical challenges encountered and the solutions adopted. There will be invited talks, Oral paper presentations and Poster sessions.
Student Induction Programme for the 16th Batch of Vedavyasa Institute of Technology will be held from July 22nd to August 9th 2019. see the attached schedule for more details.
Published onJul2019
Work Shop at VIMALJYOTHI ENGINEERING COLLEGE
Hands on Training Programme On ?Preparation and Synthesis of Nanocomposites and Nanomaterials?
We have planned to conduct a One Week Hands on Training Programme ?Preparation and Synthesis of Nanocomposites and Nanomaterials? organized by Department of Mechanical Engineering, Vimal Jyothi Engineering College, Kannur, Kerala, India on 29 July to 03 August 2019. Brochure was attached with this mail.
The objective of this Training programme provides preparation of nanomaterials by chemical and biological methods and their applications in biomedical and other engineering related fields. Powder metallurgical preparation of nanocomposites provides the testing of material like Electrochemical corrosion, Tribological testing, testing of mechanical properties, etc., end of the training programme the students should be enriched in doing their project work as a group or individuals.
COURSE CONTENTS
Green Synthesis of Nanoparticles from plant extracts
Chemical reduction of metal nanoparticles
Synthesis of metal oxide Nanoparticles using gel combustion technique
Synthesis of metal oxide Nanoparticles using precipitation technique
Synthesis of Ferro fluid nanoparticles
Preparation of Thin film by Spin coating technique
Electrode Deposition Technique of metal nanoparticles
Preparation of Super hydrophophic coating for self-cleaning application.
Synthesis of metal oxide Nanocomposites using Co-precipitation technique
Powder Metallurgy Techniques used to prepare Nanocomposites
Work Shop at RAJADHANI INSTITUTE OF ENGINEERING AND TECHNOLOGY
FDP on Social Entrepreneurship Business Innovation for Social Transformation
Rajadhani Business School in association with Rajadhani Institute of Engineering and Technology organizes FDP on Social Entrepreneurship Business Innovation for Social Transformation from 25-27 July 2019
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
THREE DAY WORKSHOP on WEB DESIGN USING PYTHON in association with IEEE Malabar Sub-Section & ISTE
Python is a high-level programming language designed to be easy to read and
simple to implement. It is open source, which means it is free to use, even for commercial
applications. Python can run on Mac, Windows, and Unix systems and has
also been ported to Java and .NET virtual machines.The objective of the workshop
is to impart basic knowledge about Python programming, develop desktop GUI
applications, websites and web applications. Participants will be given certificate
in the name of IEEE and ISTE
Participation is open to students and faculty members from AICTE
approved engineering colleges. Number of participants limited to 30.
Selection process will be done on first come first served basis
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
Five day Faculty Development Programme on Emerging Trends in Utilization and Conservation of Energy
Department of Electrical and Electronics, Toc H Institute of Science and Technology is organizing a five day FDP on Emerging Trends in Utilization and Conservation of Energy for Sustainable Development from July 15th to 19th 2019. Each session will be addressed by outstanding experts. One day IV to 66KV GIS Marine Drive Cochin is also arranged along with this FDP. Certificate will be distributed on successful completion of this programme. For further details, refer the attached brochure.
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
AICTE sponsored five days FDP on Internet of Things (IoT)
"Department of Electronics & Communication Engineering, Sree Chitra Thirunal College of Engineering is organising an 'AICTE sponsored five days Faculty Development Program on Internet of Things (IoT)' in association with APJ Abdul Kalam Technological University on 22nd-26th July 2019. The objective of this course is to impart necessary and practical knowledge of components of IoT and develop skills required to build real-life IoT based projects."
The brochure of the seminar is also attached herewith.
Department of Electronics and Communication Engineering (ECE), College of Engineering, Perumon is organizing KTU Sponsored Faculty Development Programme (FDP) on Security aspects in communication systems from 22nd to 24th July 2019.
Work Shop at MES COLLEGE OF ENGINEERING, KUTTIPPURAM
5-day FDP at MES College of Engg Kutippuram
?Research and Application Perspectives of Artificial Intelligence and Machine Learning?
Department of ECE,MES College of Engineering, Kuttippuram. is conducting a 5-day Faculty Development program on ?Research and Application Perspectives of Artificial Intelligence and Machine Learning? from 08-07-19 to 12-07-19, sponsored by APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY.The resource persons are fromNITK Surathkal, NITC Kozhikode, Government Engineering College, Kozhikode, TKM Engineering College Kollam,Amrita School of Engineering Kollamand Practicing Engineers from industry.
Work Shop at LBS INSTITUTE OF TECHNOLOGY FOR WOMEN, POOJAPPURA
Advanced Design of Concrete Structures
Faculty Development Programme on ' Advanced Design of Concrete Structures' sponsored by APJ Abdul Kalam Technological University from 24th June, 2019 to 28th June, 2019. The resource persons are from IIT Madras, NIT Calicut, College of Engineering, Trivandrum, Governement Engineeering College, Barton Hill and practising engineers from industry.
Published onJun2019
Work Shop at LBS INSTITUTE OF TECHNOLOGY FOR WOMEN, POOJAPPURA
Advanced Design of Concrete Structures
Faculty Development Programme on ' Advanced Design of Concrete Structures' sponsored by APJ Abdul Kalam Technological University from 24th June, 2019 to 28th June, 2019. The resource persons are from IIT Madras, NIT Calicut, College of Engineering, Trivandrum, Governement Engineeering College, Barton Hill and practising engineers from industry.
Published onJun2019
Work Shop at COLLEGE OF ENGINEERING PERUMON
COMPUTER VISION AND MACHINE LEARNING
Dear Sir/Madam,
We are happy to inform that a 3 days KTU sponsored FDP on"COMPUTER VISION AND MACHINE LEARNING " will be conducted during
24th-26th July, 2019 at College of Engineering Perumon engineering Perumon, Kollam by Department of CSE and Information Technology.
The number of seats is limited to 30. The selection will be on a first come first serve basis.
The brochure and schedule is attached here with.
Those who are interested in the topic may send the scanned copy of the filled application form to fdpmlcep@gmail.com before 12.00pm 20th July 2019.
Amal Jyothi Centre for Solar Energy Skill Training (Affiliated to Skill Council for Green Jobs, NSDC Reg. No. - 14560) is offering five day internship on Solar PV Systems for B.Tech students from various branches from 15th to 19th July 2019. The course contents include the following.
Components and design of grid tied and off grid Solar PV systems
Installation and operational aspects
Maintenance aspects
Interested students may contact by mail or phone for registration.
Mail Address: energycentre@amaljyothi.ac.in
Phone Number: 9447-237-125, 9645-819-717
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
KTU Sponsored FDP on "Advanced Materials Processing Technologies".
The Department of Mechanical Engineering, Sree Buddha College of Engineering, Pattoor is organizing a one-week Faculty Development Programme on " Advanced Materials Processing Technologies", sponsored by KTU during 08-12 July 2019. The FDP is exclusively for the faculty members in KTU affiliated engineering colleges. Objectives of the FDP are:
To introduce the Recent Material Processing Techniques.
To improve the awareness in Joining Techniques of Materials
To understand the functional aspects of Materials for Energy Applications
Resource persons are eminent and accomplished faculty members from the reputed institutes within India which includes Indian Institute of Space Science and Technology,
Trivandrum (IIST); CSIR-National Institute for Interdisciplinary Science and Technology Trivandrum (NIIST); Vellore Institute of Technology, Vellore (VIT); and National Institute of
Engineering, Mysore (NIE).
The registration is free for faculty members from KTU affiliated Institutions. Participants are requested to fill the registration form and send it to the address mentioned below. Registration will be confirmed only after receiving the duly signed registration form by Head of the Institution. Scanned copy of the filled registration form can be sent to email: bhatranitt@gmail.com
Last Date for Registration: 03-07-2019
Registration form should be sent to:
Dr. M S Senthil Saravanan, Co-ordinator,
Professor, Department of Mechanical Engineering,
Sree Buddha College of Engineering, Pattoor
Alappuzha, Kerala.—690529
Phone: 6369282379; E-mail: bhatranitt@gmail.com
Thanks & Regards
Principal
Sree Buddha College of Engineering, Pattoor
Alappuzha
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
KTU Sponsored FDP on "Innovative Design and Product Development
The Department of ECE, Sree Buddha College of Engineering, Pattoor is conducting a 5-day Faculty Development program on ?Innovative Design and Product Development? from 08-07-19 to 12-07-19, sponsored by KTU. The brochure of the course is attached along with this mail for your kind perusal.
Please note that Faculty members from ANY BRANCH OR STREAM can register for the course and there is NO REGISTRATION FEE as well.
Registration link is given below
https://forms.gle/wYH72R4Uw5REf1uQ7
Please feel free to contact us in case of any clarifications required:
Mr. Sabi S ]9846206432]
Thanks & Regards
Principal
Sree Buddha College of Engineering, Pattoor
Alappuzha
KTU sponsored faculty development programme (FDP) on "The Future of Big Data Analytics using Machine Learning Applications " from 27th June to 29th June 2019
Work Shop at MAR BASELIOS COLLEGE OF ENGINEERING AND TECHNOLOGY
RECENT TRENDS IN MECHANICAL CHARACTERIZATION OF BITUMINOUS BINDERS AND MIXTURES
Greetings from Mar Baselios College of Engineering and Technology, Thiruvananthapuram.
The Department of Civil Engineering, MBCET is organizing a five-day Faculty Development Programme on "Recent Trends in Mechanical Characterisation of Bituminous Binders and Mixtures", sponsored by APJ Abdul Kalam Technological University, Kerala during 24-28 June 2019.
Objectives of the FDP : Exchange ideas and experiences to the benefit of academia engaged in the field of Material Characterisation and will be motivating for aspiring researchers in the area.
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
FDP on DEEPLEARNING and PYNQ FRAMEWORK
Department of Electronics & Communication Engineering is organizing a 5-days Faculty Development Program (FDP) on Deeplearning and PYNQ Framework. The FDP is scheduled from 24th to 28th June, 2019. The program is intended to update the faculty knowledge in state-of-the art topics in the subject domain and to improve industry institute interaction and faculty/research peer interaction.
Work Shop at ADI SHANKARA INSTITUTE OF ENGG AND TECHNOLOGY
Faculty Development Programme on Industry 4.0 - Technological advances and implications
To create awareness about Industry 4.0 among the academia
To encourage the research scholars, faculties from engineering institutions and industrial personnel to take up state of the art collaborative research in the various domains associated with Industry 4.0
Work Shop at GOVT. ENGINEERING COLLEGE, BARTON HILL
Advances in Automotive Mechatronics
5 days Short Term Training Program
on
Advances in Automotive Mechatronics
Sponsored by
APJ Abdul Kalam Technological University
COURSE CONTENTS
Introduction to Engine modeling and control
Introduction to sensors, actuators
New engine design and engine management system
Introduction to autonomous vehicles and automotive control systems
Controls and electrical drives
Design and Automotive control of Electric bus
Two wheeler-electric and hybrid
Latest developments and research trends in the field of automotive mechatronics
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
ProComp 2018-19 Project Competition (Department of Civil Engineering)
Department of Civil Engineering in association with Graduates’ Association of Consultant Engineers is organizing ProComp 2018-19. ProComp is an annual project competition which provides an arena for the final year B.Tech Civil Engineering students from various engineering colleges under APJ Abdul Kalam Technological University, to show case their innovative concepts and project works, done as a part of their curriculum.
The teams interested in participation shall take approval in writing from their college in the prescribed format and sent to procompaisat@gmail.com. The last date for registration and abstract submission is 25th June 2019.
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
FDP ON " RECENT ADVANCES ON FUEL CELLS"
Department of Mechanical Engineering, St. Josephs College of Engineering & Technology Palai organizes a Five-day Faculty Development Program sponsored by APJAKTU on Recent Advances in Fuel Cells during 8 - 12 July 2019 for faculty members of APJAKTU affiliated colleges. The five-day workshop includes the topics of discussion as:
An overview of Fuel Cell Technology
Thermodynamics of Fuel Cells
Application of Fuel Cells in stationary and automobile power generation
Design and development of Hydrogen Fuel Cells for Two wheelers
Water and thermal management in Proton Exchange Membrane Fuel Cells
Testing strategies of Fuel Cells
Estimation of thermal transport properties
Hydrogen production and transportation
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
FDP on Emerging trends and future applications of Microelectronics & MEMS, 20.06.2019
The department of Electronics and communication engineering, is organizing a five-day KTU sponsored Faculty Development Programme (interdisciplinary) for faculty members from AICTE approved Engineering Colleges. titled " Emerging Trends and Future Applications of Microelectronics & MEMS. " from 20th June 2019 to 25th June 2019 .
Number of participants is limited to 30.
Registration now open!!
Advance registration for the FDP can be done through the link
Registration link: https://forms.gle/UHxgTttK4VUWZpV99
Coordinators
Nisha Jose K
Associate Professor Electronics & Communication Engg
Aparna PR
Assistant Professor Electronics & Communication Engg
Contact details:
Mobile Numbers: 9446149873/ 9447715170
Email: nisha@sctce.ac.in
College website: https://www.sctce.ac.in/
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
KTU sponsored FDP on 'Structural dynamics and EQR design of Structures'
The course will be handled by eminent academicians from Govt colleges, NITs and Structural Consultants . This course will be covering the latest codal provisions , dynamic analysis of high rise structures and all infrastructures. Kindly refer to the enclosed brochure that summarizes further information related to the course. It will be an opportunity for the faculty to attend this workshop and get benefit of the same.
Work Shop at RAJADHANI INSTITUTE OF ENGINEERING AND TECHNOLOGY
FDP on Recent Trends and Innovations in Bio-Medical Engineering
Rajadhani Institute of Engineering and Technology is conducting a 5 Day FDP on Recent Trends and Innovations in Bio-Medical Engineering organized by the Department of Electronics and Communication Engineering.
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
KTU sponsored 3 day FDP on DSP & it's Applications
Greetings from the Department of ECE, Sahrdaya College of Engineering & Technology. We are pleased to inform that we are organizing a KTU sponsored Faculty Development Programme on ?DSP & it's Applications? for faculty members of KTU affiliated colleges from 25th to 27th July 2019.
The course will be handled by Eminent academicians from Govt colleges, NITs and Scientists from Govt. Departments . This course will be covering the latest research trends in the area of digital Signal Processing and its application. Kindly refer to the enclosed brochure that summarizes further information related to the course. It will be an opportunity for the faculty to attend this workshop and get benefit of the same.
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
CALL FOR IGS-AISAT AWARD- 2019
Greetings from IGS-AISAT Award committee
We are glad to invite post graduate students of civil engineering to participate in the IGS-AISAT Award competition-2019 conducted jointly by Indian Geotechnical Society (IGS) and Albertian Institute of Science, Kalamassery. The main objective of the IGS –AISAT award competition, conducted annually for M.Tech Civil Engineering students of Kerala state is to promote research in the area of Geotechnical Engineering.
The attached brochure and the registration form may kindly be circulated among the post graduate students of your institution who are doing M.Tech thesis work on topics related to Geotechnical Engineering.
The students interested in participation should take approval in writing from their Head of Department in the prescribed format and sent to aisatigsaward@gmail.com on or before June 27, 2019.
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
FDP on "E-Mobility"
The course is designed to impart training to engineering college faculty on different aspects of E-mobility. The course intends to make faculty aware of major advancements and possibilities of transportation electrification such that they can motivate students to find environmentally safe and economically viable transportation solutions suiting Indian Conditions
Department of Mechanical Engineering, Vimal Jyothi Engineering College is organizing an two days ?International Conference on Technology Convergence in Engineering, Energy and Sustainability? (ICTCEES-2019) from 11 - 12 July 2019. Hereby we have attached the conference Brochure for more details and give wide publicity to our conference.
FACULTY DEVELOPMENT PROGRAMME ON TWO WHEELER TECHNOLOGIES AND TRENDS
The Department of Mechanical Engineering -Automobile, Amal Jyothi College of Engineering, Kanjirappally is conducting a 5-day FDP on Two wheeler technologies and trends sponsored by APJ Abdul Kalam Technological University, in association with Royal Enfield from 24 to 28 June 2019. This programme emphasises on hands-on training in the areas of Engine, Suspension System, Braking System, Electrical System and Wheels & Tyres. Hands-on training will also be provided on all types Royal Enfield two wheelers (Himalayan, Thunderbird, Classic and Continental GT)
For Registration
https://docs.google.com/forms/d/e/1FAIpQLScgvyl_81Ct642MBoHs5KAETIgJoB4Oeh3OemSmZIHp21HzpA/viewform?usp=sf_link
FACULTY DEVELOPMENT PROGRAMME ON "AN INSIGHT INTO THE RECENT TRENDS & CHALLENGES IN CYBER SECURITY"
The Department of Computer Science and Engineering, ER&DCI Institute of Technology is conducting an FDP on "An insight into the recent trends and challenges in Cyber Security" during 12-14 June 2019 sponsored By APJ Abdul Kalam Technological University. Experts from industry, academia and research are handling the sessions.
Seminar at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
Faculty Development Programme on Statistical Data analysis and Optimization techniques
The FDP provides an opportunity for young researchers to get an overview of the current trends in data analytics/business analytics, modeling & optimization and to interact with the experts in the area concerned such as science, engineering, management, etc..The course will enable the participant to gain theoretical fundamentals coupled with practical approach in the above fields arising in real world problems of different disciplines using R- language and Microsoft Excel.
Emerging Areas in Nanomaterials and it?s Application
We are indeed pleased to invite your faculty members for a one week FDP on Emerging Areas in Nanomaterials and it?s Application to be held at VJEC, Kannur from June 24 to 28, 2019. The FDP is sponsored by APJ Abdul Kalam Technological University and organized by Department of Mechanical Engineering. The resource persons for the programme are the eminent professionals from IGCAR, CSIR and Professors from reputed institution; who have working experience in Nanomaterials and Nanocomposites.
There is no registration fee. We request you to depute maximum faculty from your esteemed institution for the FDP by filling up the registration form in the below given Google link.
Also forward the signed copy of the attached registration form before 20.06.2019, Thursday.
Google Registration Form:
https://docs.google.com/forms/d/e/1FAIpQLSeI8eTbANTBO9rmYebUmaezHi1B93rQME1N8OYV5rUQKKLPSA/viewform
Seminar at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
Five days KTU sponsored FDP on Distributed Generation and Smart Grids
The course will enhance the knowledge of a participant in Distributed Generation and Smart Grids. This FDP is focused to address the issues and challenges related to Energy crises, Solar PV energy generation, Wind energy Conversion system distribution and applications, Grid integration, Smart grid technologies and Energy storage technologies.
Registration Link: https://forms.gle/uCeJjKiSVWQntep27
Conference at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
MEDCON 2019
MEDCON 2019 is an International Conference on Perceptions in Biomedical Engineering and Affordable Healthcare Technologies to be held on 13th and 14th May 2019 in our campus. MEDCON aims at bringing together interested parties from around the world working in the healthcare field to exchange ideas, to discuss innovative and emerging solutions and to develop collaborations.
Event Details: https://www.sahrdaya.ac.in/bme/bme-medcon-2019/
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
Seminar at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
Albertian Institute of Science & Technology (AISAT) is celebrating “National Technology Day” on 7th May 2019 titled “ INSPIRE’19 ” sponsored by Kerala State Council for Science, Technology, and Environment (KSCSTE) . Dept. of Computer Science and Engineering is organizing a seminar on Big Data Analytics and Cyber Physical Systems, along with the poster competition for students.
Seminar at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Vidya Academy of Science and Technology, Thrissur celebrates National Technology day (NTD)
Vidya Academy of Science and Technology, Thrissur celebrates National Technology day (NTD) by "Scaling up Engineering Project towards Successful Startups" on Saturday, 11th May 2019.
The events are sponsored by Kerala State Council for Science Technology and Environment (KSCSTE).
As a part of it, VAST is hosting two events.
Project Expo for final year B.Tech students (Any discipline/branch can participate).
Theme: Challenging Waste and Wastage of resources with the help of Artificial Intelligence.
Thesis Competition (B.Tech Circuit branches can participate.)
Theme: How to write a good Thesis?
Annual International Conference on Emerging Research Areas (AICERA,19)
The Organizing Committee of Annual International Conference on Emerging Research Areas (AICERA,19) invites you to participate in the conference taking place during 18th-20th, July 2019. The conference intends to act as a platform for researchers to share knowledge, showcase their research findings and propose new solutions in policy formulation, green material selection and manufacturing, thereby contributing to the creation of a more sustainable world.
Website: https://aicera.in/
International Multi-Conference on Computing, Communication, Electrical & Nanotechnology (I2CN-2K19)
I2CN-2K19: “International Multi-Conference on Computing, Communication, Electrical & Nanotechnology” aims to bring together leading academic scientists, researchers and research scholars to exchange and share their experiences. It also provides the premier multidisciplinary forum for researchers, practitioners and educators to present and discuss the most recent innovations, trends, and concerns, practical challenges encountered and the solutions adopted in the field of Emerging Trends in Engineering and Technology.
Conference at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
“Engineering Education for Facing the Future (E2F2′19)” rescheduled to 16 & 17 May 2019
Due to the recently scheduled visit of NBA team to the Sree Buddha College of Engineering, the 3rd Annual Conference Series titled “Engineering Education for Facing the Future (E2F2′19)” planned during 8th and 9th May, 2018 is now rescheduled to 16th and 17th May 2019.
The revised poster of E2F2’19 Conference Series with changes in important dates is attached.
I request you to kindly inform the rescheduled date of E2F2′19 to the faculty/ research scholars and P.G. students of your institution and encourage them to contribute research papers for the conference.
Requesting your kind cooperation,
With regards,
Dr. S. Suresh Babu
Principal
ER&DCI Institute of Technology is organizing a Techfest- ‘TECHFIESTA 2K19’ on 3rd & 4th May 2019.
As part of the same, the Electronics & Communication Department presents VesQurioz’19 which consists of a Two day workshop(Hands on session) that focuses on System on Chip(SoC) Design: RTL to GDSII and Embedded Product Design- Intelligent Transportation using Embedded Systems.
The Computer Science Department presents HAXWORKS’19, a two day extravaganza which includes a workshop ‘Hacking 101’- A hands-on session on the basics of Ethical Hacking & CTF and a Capture the Flag Competition.
Conference at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Adwika 19
Inter Collegiate Tech Fest with competitions in various technical events organised by Mechanical, Civil, Electrical and Electronics, Computer Science and Electronics and Communication Engineering Departments.
Published onApr2019
Conference at MARIAN ENGINEERING COLLEGE
National Conference on "Advances in Energy Efficient Technologies"
The objective of NCAEET-2019 is to provide an intellectual forum for professionals of different culture to express and outline their vision of the research and development activities in Mechanical Engineering. This Conference offers chance for leading researchers, engineers and scientists to exchange novel thoughts and applications in relation to the latest developments and to find global partners for future collaboration.
For more details Click this link
https://ncaeet2019-in.webnode.com
Conference at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
National Conference on Developments and Innovations in Civil Engineering DICE?19
We are glad to inform you that Mar Baselios Christian College of Engineering and Technology, Peermade, Kerala is organizing a National Conference on Developments and Innovations in Civil Engineering DICE?19 on 30th April 2019.
The conference aims to provide an excellent platform to the participants from industries and academic institutions to exchange new ideas and learn innovative concepts thereby widening their knowledge in the vast area of Civil Engineering.
We earnestly request you to encourage your faculty, research scholars and students to contribute papers so as to make ?DICE?19? a remarkable milestone in our history.
All selected papers will be published in Scopus / UGC approved Journals
Best paper award worth Rs.5000/-
Free accommodation will be provided for outstation participants.
Karma 2019 is the annual national level techno-cultural extravaganza of KMCT College of Engineering which is scheduled on 10/04/2019, 11/04/2019 and 12/04/2019. Born in 2013 with the motto of promoting technology, scientific thinking and innovation, Karma has created an unmatched aura of a science and technology spectacle at the campus of KMCT. Karma invites innovative minds to compete with each other, share ideas and educate people about new technological advancements and be a part of the tech platform. The three day technical and cultural extravaganza consists of numerous workshops, competitions and cultural events.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
ARC 2
Workshop on Energy Management and Auditing by Sri.Azeem K9Senior Consultant Alenso Energy, Ernakulam).
Published onApr2019
Conference at MARIAN ENGINEERING COLLEGE
National Conference on Innovations in Renewable Energy Technologies
Dear Sir/Madam,
The Department of Electrical & Electronics Engineering, Marian Engineering College is organising a National Conference on 'Innovations in Renewable Energy Technologies' NCIRET 2019 on 2nd and 3rd of May 2019. This conference provides a forum for practicing professionals, academicians, research scholars and students from across the country to exchange their innovative ideas and knowledge gathered through rigorous experiments on a common platform. The conference aims to endorse congenial communication among the participants to encourage development in Renewable Energy.
We welcome technical papers presenting research and experimental results, position papers addressing the pros and cons of specific proposals, survey papers addressing the key problems and solutions on any of the related topics or research papers on work in progress.
Original Unpublished Research Articles are invited in the following Tracks / Sub Tracks and related areas of Renewable Energy technologies.
* Novel Energy Conversion Studies
* Hybrid RESSs
* Power Devices and Driving Circuits
* Reliability and Maintenance
* Grid Interactive Systems
* Smart Grids and RESSs
* Safety and Security
* Renewable Energy Systems in Smart Cities
* Future Challenges and Directions
* Green & Clean energy
* Control Techniques
* Energy Conservation and management
Prospective authors are invited to submit manuscripts in the topics related to the conference to ncireteee19@gmail.com The email must include name, full contact address and contact number of the corresponding author/s. It is required that the manuscript follows the standard IEEE camera-ready format (IEEE standard format, double column, 10-point font). Submissions must include title, abstract, keywords, author and affiliation with email address. The paper should not contain page numbers or any special headers or footers. The manuscript should be limited to six pages.
Participants of the conference may mail their queries if any, regarding the paper submission or any other matter to ncireteee19@gmail.com
Important Dates
Full Paper Submission
12th April 2019
Notification of Acceptance
18th April 2019
Camera Ready Paper Submission
24th April 2019
Conference Dates
2nd and 3rd MAY 2019
We request you to actively participate by submitting papers to the Conference. We also request you to forward this mail to your colleagues, research scholars and students as well as encourage them to participate in the Conference.
Thank You
With Regards
Conference Convenors
NCIRET 2019
Marian Engineering College
Kazhakuttom.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Construction Planning and Scheduling.
A workshop on Construction Planning and Scheduling using MS Project organised by Civil Engg. Department.
Published onMar2019
Conference at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
National Conference on ?Recent advances in Electrical and Electronics Engineering" - NCREEE '19
Department of Electrical and Electronics Engineering of Mar Baselios Christian College of Engineering and Technology Peermade, is Organizing a National Conference on ?Recent advances in Electrical and Electronics Engineering" - NCREEE'19 on 27 April - 2019.
The Conference is Organized in tie up with KSEB Engineers' Association and IEEE PES.
http://mbcpeermade.com/Research/NCREEE%5E19
Technical Workshop on Building Information Modelling
Department if Civil Engineering is conducting Technical Workshop on Building Information Modelling
Published onMar2019
Work Shop at VEDAVYASA INSTITUTE OF TECHNOLOGY
Technical Workshop on Emerging Building Products in Civil Engineering
Department if Civil Engineering is conducting Technical Workshop on Emerging Building Products in Civil Engineering
Published onMar2019
Work Shop at VEDAVYASA INSTITUTE OF TECHNOLOGY
Workshop on Project Development using IOT
Department of CSE is conducting workshop on Project development using IOT on 28.03.2019
Published onMar2019
Work Shop at VEDAVYASA INSTITUTE OF TECHNOLOGY
Data Analytics using WEKA Tool
Department of CSE is organizing a workshop on Data Analytics using WEKA tool.
Published onMar2019
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
Two Day Workshop on Python: Web Application Framework Django
Department of Electronics and Communication Engineering of Ahalia School of Engineering and Technology is organizing a Two day workshop on Python: Web Application Framework Django on 28,29 March 2019.
The objective of the workshop is to impart basic knowledge about Python programming and Django web framework
International Conference on Multidisciplinary Engineering Sciences & Information Technology
ICMESIT’19 - With great pleasure, we would like to inform you that IES College of Engineering in association with Institute for Engineering Research and Publication (IFERP) is organizing an International Conference on “ Multidisciplinary Engineering Sciences and Information Technology, ICMESIT-2019 ” on 2nd & 3rd May 2019 at IES Education City, Thrissur , Kerala – India. ICMESIT-2019 is aimed to provide the research enthusiasts and practitioners from the world of academia as well as industry to meet and share their perspectives about the cutting edge technology around the globe. ICMESIT-2019 will provide an excellent International forum for sharing knowledge and results in recent advancements and also the invariably listed challenges in this field by the experts. We the team of IESCE & IFERP solicit your presence and invite your papers for the conference.
Kindly visit our website : http://www.icmesit.com for further details.
Conference at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
3rd Annual Conference Series titled “Engineering Education for Facing the Future (E2F2′19)”
Dear Sir/ Madam,
Greetings from the Sree Buddha College of Engineering, Pattoor, Alappuzha.
We are happy to announce that the 3rd Annual Conference Series titled “Engineering Education for Facing the Future (E2F2′19)” organized by the Sree Buddha College of Engineering is scheduled during 8th and 9th May, 2018. E2F2′19 will consist of the following national conferences covering six different branches of engineering:
• Civil Engineering: Recent Advances in Civil Engineering (RACE’19)
• Mechanical Engineering: Recent Advances in Mechanical Engineering (RAME’19)
• Electrical, Electronics and Computer Science Engineering: Innovative Technologies in Computing, Embedded and Power Engineering (ITCEP’19)
• Biotechnology and Biochemical Engineering: Nature and Life (NCNL’19)
The research papers reviewed and accepted for presentation in the conferences will be published as an e-book proceeding having ISBN (E2F2’18 e-book proceeding can be viewed at https://goo.gl/KZFHC3 ).
The poster of E2F2’19 Conference Series with subthemes and important dates, brochures of the four conferences, and registration form are attached.
I request you to kindly publicize above event among the faculty/ research scholars and P.G. students of your institution and encourage them to actively contribute research papers for the conference.
Requesting your kind cooperation,
With regards,
Dr. S. Suresh Babu
Principal
Sree Buddha College of Engineering
Pattoor, Alappuzha.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
TWO DAYS WORKSHOP ON "LEAVING NO ONE BEHIND"
International World Water Day is celebrated annually on 22 March as a means of focusing attention on the importance of freshwater and advocating for the sustainable management of freshwater resources. This is an International day of observance that encourages people to,not only learn more about how water impacts the lives of others,but also to teach people new ways to positively impact water usage worldwide.The theme for World Water Day 2019 is 'Leaving no one behind'.
Conference at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
National Conference
Department of Civil Engineering, FISAT is organising the Third National Conference SECON'19 in association with Institution of Engineers (India), Indian Concrete Institute (Kochi Chapter) and Indian Society for Technical Education on 15th and 16th May 2019. Selected papers will be published in SCOPUS indexed SPRINGER publication 'Lecture Notes in Civil Engineering'. For more details please visit our website
www.secon19.fisat.ac.in
Work Shop at GOVERNMENT COLLEGE OF ENGINEERING KANNUR
International Conclave on Climate Change Mitigation, Adaptation & Resilience - Engg. Perspectives
Climate change calls for new approaches that take in to account the complex interactions between climate, social and ecological systems. It is important to consider the different perspectives, which can be socioeconomic, cultural, biophysical or institutional, in approaches in order to have a consensus in surpassing the effects of climate change. The role of engineering fraternity in achieving this task is implicit and this conclave is an attempt to link the engineering perspectives of climate change mitigation, adaptation and resilience at an institutional level to the ground realities of climate change.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
VIDHYUTH 2K19 National Level Tech Fest
The Department of Electrical and Electronics Engineering, Toc H Institute of Science & Technology Arakkunnam is organizing a 3 day National Level Tech Fest on 20,21 and 22 nd March 2019. The Tech Fest, includes a two day workshop on Django (Python), Robotics & PCB Designing and a space exhibition in association with ISRO. On 22 rd March various technical and non- technical events are organized.
For more details visit college website:www.tistcochin.edu.in
Work Shop at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
Workshop on Ethical Hacking & Cyber Security on 15th and 16th March 2019 at Albertian Institute of
The workshop on ?Ethical Hacking and Cyber Security? is jointly organised by the Department of Computer Science Engineering and Electronics & Communication Engineering. This workshop is crafted for students to understand the cyber security world and to enhance the basic knowledge about ethical hacking. As Cyber is one of the vast domains in IT sector, we are investing best of our efforts to mould more students for the industry. The two days hands ? on training sessions will be handled by experts from the industry. No prior coding experience required.
For more details visit college website: www.aisat.ac.in
Registration Link : https://goo.gl/forms/Y3jIDKXlOAjxP7n13
National Conference - "Advances in Civil Engineering"
The Department of Civil Engineering, AmalJyothi College of Engineering, in association with Indian
Concrete Institute(ICI) is organising a two-day national conference on 25th and 26th of April, 2019. Keynote lectures will be given by faculty from IIT and NIT. Please find the attached brochure for more details.
Work Shop at ALBERTIAN INSTITUTE OF SCIENCE AND TECHNOLOGY (AISAT)- TECHNICAL CAMPUS
National Science Day Celebrations - 2019; Supported by KSCSTE and DST, GOI
Albertian Institute of Science & Technology (AISAT) is celebrating “National Science Day” on 28th February 2019 titled “Science for Sustainable Future” sponsored by Kerala State Council for Science, Technology, and Environment (KSCSTE) and supported by Department of Science & Technology (DST), Govt. of India. We are organizing painting, extempore competitions, science exhibition and erudite lecture on “Science for Sustainable Future”.
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
Grand Finale of Smart India Hackathon 2019
Sree Buddha College of Engineering, Pattoor has got an opportunity to be a nodal centre to host Smart India Hackathon 2019 – The world’s biggest innovation model - in Kerala where 28 teams from across the country will be indulged in a 36 hour non-stop product development process. Smart India Hackathon 2019, the third edition of the SIH franchise, is a nationwide initiative to manifest latent ideas into commercial products that can benefit humanity in general, and help solve India's existing social perils in particular. In Smart India Hackathon 2019, jointly organized by MHRD, AICTE, i4c and Persistent Systems, the students are encouraged to find innovative solutions for the problem statements put forward by various ministries and departments under Government of India and private organizations, thus solving some of the pressing problems we face in our daily lives.
The shortlisted teams coming to Sree Buddha College of Engineering will be providing solutions for seven problem statements put forward by three companies namely CISCO DevNet, Amadeus Software Labs and Thermo Fisher and win prizes worth 2.25 lakhs.
The honourable Prime Minister of India Shri. Narendra Modi, Minister for HRD Shri. Prakash Javadekar, Director, Innovation Cell, GoI, Dr. Mohit Gambhir, and Chairman of AICTE, Dr. Anil Sahasrabudhe will be interacting with the participants of SIH 2019 through video conferencing. In addition, eminent personalities from the state like Minister for Higher Education, Kerala State, Dr. K. T. Jaleel, Principal Secretary of Higher Education, Dr. Usha Titus and several leaders from the industry will be visiting the campus during these 36 hours. Under these circumstances, we solicit your august presence and wholehearted cooperation for the grand success of this coding extravaganza.
The poster is attached herewith.
Conference at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
CSIR Sponsored Conference at Ahalia School of Engineering and Technology
The Department of Electrical and Electronics Engineering of Ahalia School of Engineering and Technology is organizing a Two day Two Day National Conference on ?Recent Trends in Renewable Energy Technologies and Smart Grids ? RETS 2019? on 15th and 16th of March 2019. This programme is technically sponsored by Council of Scientific & Industrial Research (CSIR).
This Conference focuses on the theme of Renewable Energy sources, the methodology and technology behind the power extraction in these resources and concentrates on effective utilization of them. The integration of generating units, the concepts of feeding local consumers, their merits and demerits, combined co-generation systems, electricity tariff, automation and the role of internet shall be discussed on the area of smart grids.
Seminar at MES INSTITUTE OF TECHNOLOGY AND MANAGEMENT
Seminar on Science for breadwinning and comfort for all
Seminar on Science for breadwinning and comfort for all by Dr. B Premlet along with brainstorming lab session for school students. Program is sponsored by Kerala State Council for Science, Technology & Environment and supported by Dept of Science & Technology, Govt. of India
Published onFeb2019
Work Shop at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
National Science Day Celebrations - 2019; One day Workshop - Supported by KSCSTE and DST, GOI
As part of the National Science Day Celebrations - 2019, UKFCET is conducting one day workshop entitled "The Opportunities and Realities in Communicating Science for All" on 19. 02.2019 supported by Kerala State Council for Science, Technology and Environment & Department of Science and Technology, Government of India.
Work Shop at BASELIOS MATHEWS II COLLEGE OF ENGINEERING
"Workshop on ROBOTICS"
Dear Sir,
Greetings from BMC!!
It gives us immense pleasure to welcome the students of your prestigious Institution to
the "Workshop on Robotics" conducted by the Applied Electronics and Instrumentation department of Baselios Mathews II College of Engineering
to be held on the 15 th February 2019.
The brochure of the workshop containing details of the event
is enclosed for information. Kindly forward the same to the students of your college.
Sincerely,
Principal
Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
International Conference on Emerging Trends in Materials Engineering, ICETME'19
ICETME'19 is to be conducted by department of mechanical engineering, in TIST cochin, during april 22-24,2019. International Conference on Emerging Trends in Materials Engineering, ICETME'19 is planned to be an internationally identifiable mega event aimed at forging a cohesive environment among academia, researchers, industrialists, entrepreneurs and professionals with focus on materials engineering applications.
KMCT College of Engineering in association with IETE Kozhikode Subcentre is organizing a Two day Workshop on ?Internet of Things? on 25th and 26th February 2019. This workshop introduces the principles and application behind IoT (Internet of Things).Registration fee for attending this workshop is Rs.500/- per participant.The workshop is meant for students.
Link for registration: https://goo.gl/aXFXCV
Work Shop at NEHRU COLLEGE OF ENGINEERING AND RESEARCH CENTRE
Tech Fest 2K19-NSITE
Tech Fest 2K19: NSITE
We take this opportunity to inform you that Nehru College of Engineering and Research Centre, Pampady, Thiruvilwamala, Thrissur is hosting a National level Tech Fest- NSITE on February 13 & 14, 2019 at our campus. The objective of the Tech Fest is to develop the innovative ideas among high school/Higher Secondary/Diploma/Engineering Students demonstrating exception skills. We also desirous to conduct project competitions for the students and will be rewarded with valuable prizes worth Rs. 5 Lakhs and various departments of NSITE will showcase technical and non technical events.
Work Shop at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
ICEFOSS-2019
ICEFOSS (ICEFOSS is a Conference for Enthusiasts of Free and Open Source Software) is Free Software Conference organized by FISAT Free Software Cell (FFSC) in association with Department of Computer Science And Engineering. ICEFOSS 2019, scheduled on February 19,20 2019 includes Workshops covering different aspects of Free Software. ICEFOSS 2019 is the seventh edition of this conference.
ICEFOSS also hosts "Women Hackathon" in association with ICFOSS. It is a hackathon exclusively for women which aims to connect and inspire women, and be a stepping stone in furthering education and technological career. Women hackathon provides both an opportunity to create space that will make women leaders of technology.
Site: http://icefoss.fisat.ac.in/
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
Two Day Workshop On Free and Open Source Software (FOSS) in association with ICFOSS,Trivandrum
Department of Computer Science and Engineering of Ahalia School of Engineering & Technology (ASET) is organizing a Two Day Workshop On Free and Open Source Software (FOSS) in association with ICFOSS,Thiruvananthapuram on 15, 16 February 2019. FOSS has the potential of creating an open source culture among the prospective software developers.
This workshop aims at creating a basic awareness about the FOSS as well as equipping the students with some of the basic open source platforms like Debian.
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
MERAKI - a celebration honouring the many successful women
When passion burns? brighter than fear, you discover that you are fierce and strong like never before.?
Guys and girls!! The time has come to unfold the second edition of MERAKI - a celebration honouring the many successful women around us.
Meraki 2.0 , powered by AnitaB.org and Cult A Way 2019, presents power packed sessions by women achievers who've left an indelible mark in diverse fields of expertise. Along with a hands-on workshop and exciting competitions, Meraki promises to deliver the best.
Come, join us, empower yourselves and get inspired by the women professionals who dared to break the mould.
Register Now at: bit.ly/meraki20
Venue: Sree Chitra Thirunal College of Engineering, Trivandrum
Date: February 16
https://m.facebook.com/cultaway.sctce/photos/a.492341947485191/2201034816615887/?type=3&source=48
For more details contact:
Niveditha V Nair (+91 9020676850)
Parvathy B (+91 85471 77446)
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Foundation and Column marking
One day workshop on Setting out of Foundation & Column marking organised by Civil Engg. Dept.
Published onFeb2019
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
One Day Workshop On Theory and Practice of Ham Radio Operations
Department of Electronics and Communication Engineering of Ahalia School of Engineering and Technology is organizing a One Day Workshop on Theory and Practice of Ham Radio Operations 0n 16 February 2019 in association with IEEE Antennas and Propagation Society, Kerala Chapter. The objective of this workshop is to impart the basic knowledge of radio technology and operating principles with a demonstration of Ham Radio communication equipment.
Conference at MAR BASELIOS COLLEGE OF ENGINEERING AND TECHNOLOGY
2nd International Conference on Networks and Advances in Computational Technologies (NetAct 19)
NetAct is a forum for presenting results of research work and sharing experiences to face new challenges in the field of Computer Science & Information Technology. It brings together experts from Industry, govt. Organizations and academia from all over India and abroad with vast experiences in design, engineering & research.
Seminar at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
Two day National Seminar on "Recent Trends in Environmental Engineering and Management (RTEEM-2019)"
Department of Civil Engineering, UKFCET is conducting two day national seminar on "Recent Trends in Environmental Engineering and Management (RTEEM-2019) funded by Directorate of Environment and Climate Change, Government of Kerala scheduled on 15 and 16, February, 2019. For registration click https://www.ukfcet.ac.in/rteem.php
The mega Intercollegiate Techno-Cultural Fest of the Bishop Jerome Institute
COGNIZ 2K19 to be held on the 18 th , 19 th and 20 th February 2019.
Technical and Non-technical events have been planned exclusively by
every department for the students to portray their technical and cultural skills. The
Innovation and Entrepreneurship Development cell of BJI will conduct school and college level project competitions.
www.cognizbji.in
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
One-Day Hands-On Training Programme On LATEX
LATEX (pronounced either as “Lay-tech” or “Lah-Tech”) is a portable document formatting system based on TEX (pronounced as “tech”), a typesetting language especially designed for math and science. It is also a programming language, which means one can create one’s own commands to simplify and customize it. TEX and LATEX use by default a font family called “Computer Modern”, which includes a variety of styles such as Serif, Sans Serif, Typewriter, and a particularly rich set of mathematical symbols.
Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
National Conference on Recent Advancements in Industrial Safety Engineering (RAISE 2019).
We take the pleasure to inform you that the Department of Safety and Fire Engineering, conducting a National Conference on"Recent Advancements in Industrial Safety Engineering-2019" in Association with Department of Factories & Boilers, Government of Kerala & National Safety Council (Kerala Chapter)at Toc H Institute of Science & Technology, Arakunnam, Ernakulam, Kerala on 28th& 29th March, 2019.RAISE 2019 offers a track of quality Research and development updates from Students, Engineers, Researchers and Scientists to provide an opportunity in bringing the new technology and perspectives that will contribute to Industrial Safety sections in the next few years.All submitted papers will be under peer review and accepted papers will be published as Conference Proceedings (Hard Copy Book) with ISBN number. The papers under process safety section will be published as a special issue in Journal of Loss Prevention in the Process Industries (JLPPI) (Scopus indexed). The selection procedure of process safety papers strictly following the guidelines of JLPPI. Both academia and industries are invited to present their papers dealing with state-of-art research and future developments in various conference themes.
For conference details, Please visit our website
www.sites.google.com/view/raise2k19
Work Shop at Rajadhani Institute of Science and Technology
FDP
Ammini College of Engineering is organizing a Three day KTU sponsored FDP on "Advancement in concrete Technology " during 21st to 23rd of January 2019.The course will enable a participant to update the recent trends & technology in concrete and to cultivate the importance of concrete mix design and its corresponding application
Business Analytics using Predictive Analysis using R-Use of Tableau in Data Visualization-Prescriptive Analytivs using Excel Solver-Time Series Analysis-SPSS-Factor Analysis-Structural Equation Modelling using AMOS
International Seminar On “Strategies for a Successful Career in Science, Engineering, and Technology
International Seminar On “Strategies for a Successful Career in Science, Engineering, and Technology” hosted by Department of Electrical and Electronics Engineering, Mangalam College of Engineering, Ettumanoor, Kottayam, Kerala, India on 4th February, 2019.The topics for the seminar include Mastering state of mind for self-empowerment and successful STEM career, Emerging technologies and employment/entrepreneurship opportunities in Photonics, ICT, Smart cities, and Renewable energies and Introduction to IEEE and Photonics Society. Resource Person is Dr. Naresh Chand, Fellow IEEE Director, US R&D Center of Huawei Technology, USA .Kindly confirm your participation on or before 20th January, 2019
OnlineRegistration link: https://goo.gl/forms/IsmcZIkHo7SoNDYF2
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Five-Days Short Term Course on Theoretical Foundations on Artificial Neural Networks during January
Vidya Center for Artificial Intelligence and Research, ,Vidya Academy of Science and Technology, Thrissur is organizing a Five-Days Short Term Course on Theoretical Foundations on Artificial Neural Networks during January 01-05, 2019 .The main objective of the STC is to provide theoretical foundations for the academicians and researchers who are involved in the field of machine learning and deep learning using ANN.
Five Day FDP on "Power Electronics Technology, its Applications and Control (PETAC-2019)" on 14th
Department of Electrical and Electronics Engineering of College of Engineering Vadakara, organises a five day Faculty Development Programme ?Power Electronics Technology, its Applications and Control (PETAC-2019)? on 14th to 18th January 2019. The FDP is open for faculty members of KTU affiliated Engineering colleges. Faculty members from EEE, EIE and ECE can attend the program. Application forms in the respected format duly filled up in all respects, along with the sponsorship certificate from the head of the institution, should reach the coordinators on or before 10.01.2019
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
staadpro V8i
Two day workshop on staadpro V8i organised by Civil Engineering Department.
Published onDec2018
Work Shop at JAWAHARLAL COLLEGE OF ENGINEERING AND TECHNOLOGY
FDP on EMERGING TRENDS IN BIG DATA ANALYTICS AND HADOOP
The Department of CSE, Jawaharlal College of Engg. and Tech. is organizing 5 days FDP on EMERGING TRENDS IN BIG DATA ANALYTICS AND HADOOP from 07/01/2019 to 11/01/2019. The programme is sponsored by APJ-AKTU. The main objective of the FDP is to provide practical foundation level training that enabled immediate and effective participation in Big Data and Hadoop. This FDP helps the participants to gather knowledge in big data analytics and can do research in this field.
Work Shop at MEA ENGINEERING COLLEGE, PERINTHALMANNA
FDP On Artificial Intelligence
Department of Computer Science and Engineering of M E A Engineering college, Perinthalmanna organises a three days Faculty Development Programme on Artificial Intelligence from 13th to 15th December 2018.The programme primarily focuses on the syllabus of Artificial Intelligence of CSE of KTU as well as recent advancement in the field of Artificial Intelligence.
Published onDec2018
Work Shop at GOVERNMENT ENGINEERING COLLEGE SREEKRISHNAPURAM
FDP on Power Electronics and Embedded System
Faculty Development Programme On Power Electronics and Embedded System – Theory and Practice
Work Shop at AMAL JYOTHI COLLEGE OF ENGINEERING, KANJIRAPPALLY
Five Days FDP on Compiler Design
Department of Computer Science & Engineering, Amal Jyothi College of Engineering, Kanjirappally in association with ACM Kottayam Chapter is organizing a five day Faculty Development Programme (FDP) on "Compiler Design", from 17th to 21st December 2018. This FDP is based on the Compiler Design syllabus in Computer Science & Engineering of APJ Abdul Kalam Technological University.The workshop is hosted by Dept of CSE, AJCE in association with ACM Kottayam chapter. Last date of registration is 10th December 2018. Please find the attached brochure for details.
Work Shop at ADI SHANKARA INSTITUTE OF ENGG AND TECHNOLOGY
Artificial intelligence and machine learning.
Artificial Intelligence and innovative applications
New generation Data analytics(Hands-on sessions)
Scala & Functional data representation
Big data with Spark and RDDs
Machine Learning and Deep learning
Introduction to TensorFlow
Natural Language Processing
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
KTU sponsored Faculty Development Programme (FDP) on "Digital Signal Processing"
Department of Electronics and Communication Engineering of Ahalia School of Engineering and Technology, Palakkad is organizing a KTU Sponsored Faculty Development Programme on Digital Signal Processing from 10th December 2018 to 14th December 2018 (5 days). The FDP focuses on recent developments and research issues in the field of Digital Signal Processing and provides an opportunity for faculty members to update their knowledge in the area of Digital Signal Processing. Eminent resource persons from IITs, NITs and other prestigious institutes of excellence all over India, will handle the sessions.
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
RECENT ADVANCES IN MANUFACTURING ENGINEERING?
Five Days Faculty Development Programme on RECENT ADVANCES IN MANUFACTURING ENGINEERING Sponsored by APJ Abdul Kalam Technological University. Program is hosted by Department of Mechanical Engineering, St.Joseph's College of Engineering and Technology, Choondacherry, Pala, Kottayam on 7th to 11th January, 2019.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
ARC
Expert talk on emerging trends in Instrumentation and Control Engineering by Dr.Supriya M H, HoD, Dept. of Electronics, CUSAT.
Workshop on IoT by Networkz System Technology.
Published onNov2018
Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
WICT 2018
Toc H Institute of Science & Technology, Arakkunnam, Department of computer Science & Engineering in association with MIR Lab(USA), VSB Technical University-Ostrava and CSIis organizing 8th World Congress on Information and Communication Technologies (WICT 2018)from 17th to 19th December 2018.
Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
IBICA 2018
Toc H Institute of Science & Technology, Arakkunnam, Department of computer Science & Engineering in
association with MIR Lab(USA), VSB Technical University-Ostrava, ISTE , CSI and co-sponsored by
KSCSTE, is organizing 9 th International Conference on Innovations in Bio-Inspired Computing and
Applications (IBICA) from 17th to 19th December 2018.The aim of IBICA is to provide a platform for
world research leaders and practitioners, to discuss the “full spectrum” of current theoretical
developments, emerging technologies, and innovative applications of Bio-inspired Computing. Bio-
inspired Computing is currently one of the most exciting research areas, and it is continuously
demonstrating exceptional strength in solving complex real life problems. The main driving force of the
conference is to further explore the intriguing potential of Bio-inspired Computing.
Work Shop at SARABHAI INSTITUTE OF SCIENCE AND TECHNOLOGY
Faculty Development Programme(FDP) on General Engineering
Faculty Development Programme(FDP) on General Engineering
Design and Engineering is a course newly introduced by APJ Abdul Kalam Technological University (KTU) for the second semester of all undergraduate engineering programmes. This Faculty Development Programme is designed to introduce various aspects of the topics covered in the syllabus with suitable case studies. Classes are offered by experts in the respective fields.
About the Programme
Some of the topics covered: Product Design Process, Technology based assessment & Preproject activities, Configuration control. Preliminary design, Detailed design, Design for manufacturability, assembly & Integration, Management of Design Requirements to evaluation of options, Design process for commercial products, Product assurance & Reliability in Design, Structural Design aspects and tools, Testing and evaluation, Importance of computers as Teaching aid and Internet of things, Design of Industrial Safety systems, Design & Laws, Patents, IPR.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
TRIODCE 3 Digital Survey
One day workshop on Digital Survey using Total Station.
Published onNov2018
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
METAMES
Two Day workshop on AI and PLC.
Published onNov2018
Work Shop at MEA ENGINEERING COLLEGE, PERINTHALMANNA
Workshop on Ethical Hacking
MEA Engineering College, Perinthalmanna, Department of Information Technology is conducting a hands-on workshop based on Ethical Hacking with a sponsorship of ICFOSS by Robokart in association with IIT Mumbai on 16th and 17th November 2018.
A college level competition also will be there during workshop
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
DTE approved, KTU Sponsored STTP on "RESEARCH CHALLENGES IN DATA ANALYTICS", 06/12/2018 - 12/12/2018
Short Term Course on "Research Challenges in Data Analytics". 06/12/2018 to 12/12/2018
Social network analysis focuses on the analysis of pattern of relationships among people, organizations, states and different social entities. The rapid growth of consumer data combined with the impact of social media has created a need to understand the meaningful data. Social network analysis has already been used in a number of areas, primarily focused on criminal activities. Analysis of Big data can lead to increase in sales, fraud detection, pattern recognition and risk prediction in various domains. Social network analysis can be used to detect patterns, establish linkages between individuals and to connect non-obvious relationships. The research works are being carried out in the area of finding the communities from multi-relational social network data for identifying criminals and to detect abnormal behaviors. The tools and techniques used for analyzing the data posted in social networks are to be familiarized for analyzing the data. The different topics covered in this course includes Scope of Research in Data Analytics and Block Chain Technology, Big Data Security, Research challenges in Data Analytics, Tools and Techniques used for analyzing Big Data, Probability & Random process, Processing and Analysis of data with Hadoop/Spark, Storm Data Analytic tool and Programming using R language. Hands on training sessions will be arranged for utilizing the tools of data analytics, analysis of data Jwith Spark and coding using R language.
Coordinators Dr. Jayasudha J S (9495376533), Prof. Rejimoan R (9446459948)
Work Shop at MUSALIAR COLLEGE OF ENGINEERING AND TECHNOLOGY PATHANAMTHITTA
Faculty Development Programme (FDP) on " Digital Design & Emerging Trends in VLSI "
The Department of Electronics & Communication Engineering, Musaliar College of Engineering & Technology, Pathanamthitta is organizing a three day Faculty Development Programme (FDP) on " Digital Design & Emerging Trends in VLSI ", from 18th to 20th December 2018. This course is to understand the upcoming trends in submicron technology and to provide a platform to enrich and update the knowledge in the area of VLSI Design & Technology
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
1 day workshop on Renewable Energy - Opportunities and Challenges
Session on Renewable Energy Electric Power Production by Mr. C. P. George, the Deputy Chief Engineer, KSEB and Session on Challenges and issues in concentrating solar power systems by Dr. Sendil Kumar, Head, Mechanical Engineering, NIT, Puducherry
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
Three Day KTU sponsored FDP On Numerical Linear Algebra and Partial Differential Equation
Ahalia School of Engineering & Technology (ASET) is organizing a Three Day KTU sponsored FDP On Numerical Linear Algebra and Partial Differential Equation during 05-07 December 2018.The course will enable a participant to gain practical knowledge of modern computational techniques for numerical solution of Linear Algebra problems and Partial Differential Equations using MATLAB as vehicle for computation.
PRAVAH 2K'18 is an intercollegiate Technical Festival of our college to provide a vibrant platform for the students to showcase their technical talents. PRAVAH 2K'18 is to be held on 2nd and 3rd November 2018.The theme of this event is "Smart City"
Published onNov2018
Work Shop at RAJADHANI INSTITUTE OF ENGINEERING AND TECHNOLOGY
FDP on Employability Skills in a Time of Disruption
Rajadhani Business School (RBS) is organizing a three day workshop on Employability Skills during 22-24 November 2018.
Conference at COLLEGE OF ENGINEERING KARUNAGAPPALLY
Women in Power Summit
IEEE student branch in association with IEEE Power and Energy Society(PES) Student Branch Chapter of College of Engineering Karunagappally is organizing a national level technical symposium on 9, 10 and 11th November 2018 at this institution. The Event is supported by IEEE PES head quarters through its member driven initiative campaign.
Published onOct2018
Seminar at M G COLLEGE OF ENGINEERING
COMPAS-2018
M G College of Engineering, Trivandrum is organizing a seminar on 30/10/2018
Topic: "CYBER FORENSICS & CHALLENGES"
Published onOct2018
Work Shop at GURUDEVA INSTITUTE OF SCIENCE AND TECHNOLOGY
Conference at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
Responsible Tourism
This program plans to discuss an evaluation of destinations, including Kovalam, Kumarakom, Thekkady and Wayanad, where responsible tourism initiatives have been administered under Kerala Tourism Department over the past several years. It also opens discussions of effectiveness of these initiatives in Kerala. Participants can take back a learned opinion on way forward for responsible tourism in Kerala
Work Shop at COLLEGE OF ENGINEERING KARUNAGAPPALLY
LEXATHON
LEXATHON A 24 HOUR HACKATHON
Published onOct2018
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
B.Planning & Architecture
One day Workshop on Building Planning & Architecture with the technical support of CILL projects and software support of CAD DESK organised by Civil Engineering Dept.
Published onOct2018
Conference at COLLEGE OF ENGINEERING TRIVANDRUM
HWWE-2018
International Conference on Humanizing Work and Work Environment (HWWE) conference is one of the important annual events in the field of Human Factors and Ergonomics.
The current conference theme of HWWE 2018, "Technology Enabled Workplace Design", highlights the endless needs of human beings in his never ending quest to improve human life and aims to serve as a confluence of ideas emerging from every aspect of technology implementation in making the life more beautiful. HWWE 2018 thus targets to provide ways to improve self, the environment he/she works, and to benefit everyone interacting in man-machine work systems.
Abstract Submission deadline extended to 15 October 2018.
For more details visit
http://hwwe2018.cet.ac.in/index.php
Work Shop at SREE NARAYANA GURU COLLEGE OF ENGINEERING & TECHNOLOGY
Techkranti 2K18 - Techfest
Two days National level Technical Festival Techkranti 2K18 on 12th and 13th october 2018. Students can attain minimum 52 activity points and attractive prices. For more details visit www.techkranti.sngcet.org.
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
One day Workshop on Koha and Library Automation on 12th October 2018
The workshop is under 'IIT Bombay X - LAKSHYA' programme (Learner Advancement of Knowledge & Skills through HYbrid Approach). The course will be conducting using the blended MOOCs pedagogy developed by IIT Bombay. This approach combines online learning with face-to-face sessions. The last date for registration is 10th October 2018 and registration fee for the workshop is Rs. 500/-.
ANNUAL IEDC SUMMIT - REBUILD KERALA, IN COLLABORATION WITH KERALA STARTUP MISSION
Published onOct2018
Work Shop at COLLEGE OF ENGINEERING TRIVANDRUM
Faculty Development Programme on 'Enterprise Risk Management'
FDP on "Enterprise Risk Management" organised by CET School of Management is scheduled from 11th to 13th October 2018. For registration, fill the attached registration form send the scanned copy of the signed endorsement form to "director.mba@cet.ac.in" or "drrajug@yahoo.co.in" or " abhilash746@gmail.com" on or before 05/10/2018.
IEDC Mangalam in association with IIT Bombay- conducts an event IOT Challenge on 5th- 6th October 2018 at Mangalam Campus, Ettumanoor.. The event is conducted in the last year also, it was a great success in terms of participation by external participants.
A great milestone to Toyo University, JAPAN & Mangalam collaboration “ JAPAN ASIA YOUTH EXCHANGE PROGRAM IN SCIENCE” – NINE students& Dean research from Mangalam college of Engineering received a fellowship from JAPAN government to visit JAPAN university for a duration of Two weeks.(17/9/2018-26/9/2018)
Mangalam College of Engineering
Department of Electrical & Electronics Engineering
Proudly Presents
CANSAT
Satellite Designing and Launching Workshop
on
10th & 11th October, 2018
Build your own Satellite & test it using Computer Interface
?Hands on training experience to explore your passion?
Registration link: https://goo.gl/forms/OBzyYkFTL8O7UTiE3
Registration Deadline: 5th October, 2018
Work Shop at SARABHAI INSTITUTE OF SCIENCE AND TECHNOLOGY
FACULTY DEVELOPMENT PROGRAMME ON GENERAL ENGINEERING
The FDP having the approval from KTU planned at Sarabhai Institute of Science&Technology from 03 to 07 Sept stands postponed to December 18, due to the technical issues related to the severe flood affected in the Kerala State.
Published onSep2018
Work Shop at SARABHAI INSTITUTE OF SCIENCE AND TECHNOLOGY
FACULTY DEVELOPMENT PROGRAMME ON GENERAL ENGINEERING
ABOUT THE PROGRAMME:
Design and Engineering is a course
newly introduced by APJ Abdul Kalam
Technological University (KTU) for the
second semester of all undergraduate
engineering programmes. This Faculty
Development Programme is designed
to introduce various aspects of the
topics covered in the syllabus with
suitable case studies. Classes are
offered by experts in the respective
fields.
Some of the topics covered: Product Design Process, Technology based assessment & Preproject
activities, Configuration control. Preliminary design, Detailed design, Design for
manufacturability, assembly & Integration, Management of Design Requirements to evaluation
of options, Design process for commercial products, Product assurance & Reliability in Design,
Structural Design aspects and tools, Testing and evaluation, Importance of computers as
Teaching aid and Internet of things, Design of Industrial Safety systems, Design & Laws,
Patents, IPR.
5 Days hands on training program in SMARTURN CNC Lathe - different batches from 11/06 to 23/07/2018
Greetings from Providence College of Engineering, Chengannur.
We are pleased to inform you that our Department of Mechanical Engineering is organizing a 5 day hands on training program in the SMARTURN CNC Lathe. The scheduled dates and the fees are mentioned in the attached brochure. The targeted audience for this program are the faculty members and students from engineering colleges, polytechnic colleges and from manufacturing industries who want to learn the CNC programming and the operation of CNC
lathe.
This is a great opportunity for the participants to learn the CNC program and operation on a
real time production machine. Kindly depute your staff members for this training program
and also circulate and inform your students as this will help them to earn the activity points
as per the KTU regulations.
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
Three Day Workshop on "INTERNET OF THINGS"
About the programme
The Internet of Things (IoT) is about devices and services delivering end-to end-solutions. Internet of Things is an attempt of connecting objects to the internet and also to each other - allowing people and objects themselves to analyze data from various sources in real-time and take necessary actions in an intelligent fashion.
Course contents
� Learn the basics of Internet of Things and its applications.
� What ?The Internet of Things? means and how it relates to Cloud computing concepts.
� How open platforms allow you to store your sensor data in the Cloud.
� The basic usage of the Arduino environment for creating your own embedded projects at low cost.
� Hands on experience on IOT using Arduino/Raspberry Pi.
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
Faculty Development Programme (FDP) on "Signal Processing: From Fundamentals to Challenges"
Rajagiri School of Engineering & Technology, Kochi is organizing a five day Faculty Development Programme (FDP) on "Signal Processing: From Fundamentals to Challenges", from 09th July 2018 to 13th July 2018.
Work Shop at CARMEL COLLEGE OF ENGINEERING AND TECHNOLOGY
Short Term course on NBA ACCREDITATION, Significance, Procedures & Role
A Faculty development programme on " NBA ACCREDITATION- Significance, Procedures & Role(An action oriented approach) is arranged from 20/6/2018 to 22/06/2018, in our college, in association with ISTE Kerala section. The programme is intended to empower the teachers of Engineering & Polytechnic colleges to carry out the curricular as well as co-curricular activities, in accordance with the requirements stipulated by National Board of Accreditation, in an easy and efficient manner.
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
STTP on "Advances in design, Construction and Rehabilitation of Concrete Structures"
Department of Civil Engineering, Sree Buddha College of Engineering Pattoor, is organising a short term training program on " Advances in Design, Construction and Rehabilitation of Concrete structures" from 21st -25th May 2018.
The course is open to ?all Members of Faculty, M.Tech Students and Research Scholars in the field of Civil Engineering.
Total seats are limited to 50. Refreshments and Lunch will be provided on course days and Certificate will be distributed on completion of the course.
For details: Brochure, Registration form are attached.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
GURU
Faculty Development Programme by the Team from MES Training Academy.
Published onApr2018
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Faculty Development Programme on Advances in Structural Engineering
Faculty Development Programme on "Advances in Structural Engineering" during June 4 - 8, 2018. The main objective of the programme is to make the faculty members familiar with advanced structural analysis and design using latest codes.
Work Shop at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
ONE WEEK NATIONAL WORKSHOP ON DESIGN OF EXPERIMENTS & OPTIMIZATION TECHNIQUES
The Department of Mechanical Engineering, Sree Buddha College of Engineering, Pattoor is organizing a one week National Workshop on "Design of Experiments and Optimization Techniques" during 14-18 May 2018. The objective of the workshop is to enrich the participants with the knowledge on the use of Design of Experiments as a useful research tool as well as to introduce them to various optimization techniques like nature inspired algorithms, calculus of variance, Teaching Learning Based Optimization (TLBO) Algorithm etc.
The content of the workshop is framed to suit audience from any discipline of engineering.
You are requested to confirm the participation at the earliest by registering in the following link:
https://docs.google.com/forms/d/1bRz8lAVNXzsFdSjcub-Cky45yE3-7peS9OQNIymEM0o/edit.
The brochure of the workshop is attached herewith for your perusal.
Conference at BASELIOS MATHEWS II COLLEGE OF ENGINEERING
International Conference on Soft Computing Systems
Baselios Mathews II College of Engineering is proud to announce its Third International Conference on Soft Computing Systems. (ICSCS-2018). ICSCS 2018 is an International Conference on Emerging Technology Trends in Computing, Communications and Electrical. ICSCS-2018 intends to offer an energetic environment by bringing together Researchers, Professionals, Academicians, Corporate & Industry Professionals, Technically sound Students and Entrepreneurs from various organizations all over the world under one roof which facilitates
Published onApr2018
Work Shop at COLLEGE OF ENGINEERING, THALASSERY
5-day Faculty Training Programme on 'Machine Learning' at College of Engineering Thalassery
Department of Computer Science & Engineering , College of Engineering Thalassery, is organizing a 5-day Faculty Training Programme on 'Machine Learning' for the enthusiastic teachers of engineering colleges.
The FDP is being organised with financial assistance from APJ Abdul Kalam Technological University, from 23rd April to 27th April 2018 at CE Thalassery.
There is no registration fee for the FDP.
One week ISTE sponsored FDP on "Workshop on Analog Circuits"
The objective of the FDP is to provide a platform for academicians and practitioners who are involved in the field of Electronics Engineering to get updated with the recent techno- logical advancement. The FDP will also provide practical exposure to the participants and motivation to pursue their regular teaching and research work effectively.
5 Day FDP on Renewable Energy Conversion and Management
The primary cause of global warming is the use of fossil fuels such as coal, natural gas and oil to generate electric energy. Reducing the consumption of fossil fuels, adopting more fuel efficient technologies and shifting to renewable sources of energy are required to reduce global warming and mitigate the adverse climatic changes. This Faculty Development Program on “Renewable Energy Conversion & Management ”focuses on current and emerging trends in renewable energy conversion and it’s effective management.
5 Day FDP on Transformations in Engineering Education
The program aspires to.
* Provide a much-needed formal, recognized qualification in teaching technologies that is fully customized for engineering educators.
* Provide the necessary theoretical knowledge and practical skills for becoming an effective Engineering educator.
* Provide a holistic programme which will help to not only sharpen the faculty member’s teaching skills but also develop his/her professional acumen and confidence.
* Prepare the educators in using / improvising technological tools to enhance classroom instruction.
* Provide an effective tool to the administration for evaluating faculty (for hiring, promotions etc.).
* Provide an effective tool to face the accrediting agencies.
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Six-Days Faculty Development Program on Theory of Computation
Faculty Development Programme on ?Theory of Computation? ? April 16-21, 2018.
The department of Computer Science and Engineering at Vidya Academy of Science and Technology, Thrissur, is organizing a Faculty Development Programme on ?Theory of Computation [Based on KTU Syllabus]? during April 16-21, 2018. The faculty development programme aims to prepare young faculty members to understand the subject ?Theory of Computation? and to enhance their teaching skills with depth knowledge. Topics include Automata and Language Theory, Computability Theory, and Complexity Theory.
Conference at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
International Conference on Emerging trends and Innovations in Engineering and Technological Researc
ICETIETR 2018 is an annual International Conference on Emerging trends and Innovations in Engineering and Technological Research. The conference seeks submission from Practicing Engineers and Technologists,Scientists from R & D Institutions,Faculty members of Engineering colleges,Research Scholars and Students presenting novel research on all theoretical and practical aspects of data.Papers describing the application of Contemporary Engineering and Technology,the implementation of systems, lessons learned,new methods of technologies,advanced prototypes,systems,tools,techniques and general survey papers indicating future directions are also encouraged.
International Multi-Conference on Computing, Communication, Electrical & Nanotechnology
I2CN-2K18: “*International Multi-Conference on Computing, Communication,
Electrical & Nanotechnology”* aims to bring together leading academic
scientists, researchers and research scholars to exchange and share their
experiences. It also provides the premier multidisciplinary forum for
researchers, practitioners and educators to present and discuss the most
recent innovations, trends, and concerns, practical challenges encountered
and the solutions adopted in the field of Emerging Trends in Engineering
and Technology.
Conference at SREE BUDDHA COLLEGE OF ENGINEERING, PATTOOR
2nd Annual Conference Series titled Engineering Education for Facing the Future (E2F218)
2nd Annual Conference Series titled Engineering Education for Facing the Future (E2F218), organized by Sree Buddha College of Engineering, Pattoor is scheduled during 17th and 18th of April 2018.
Conference at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
EQUILIBRIA 2018 - A National Level Symposium on Bioproduct Design Development and Management
In 2016, the students and staff of BT & BCE department decided to conduct a National Level Symposium to create a platform to show-case the findings of the student?s projects, to have exposure and knowledge in advances of biotechnology through invited talks, opportunity for researchers to present their original research work by oral and poster presentation and above all to create an environment for discussion and interaction with eminent participants. We carried the spirit of EQUILIBRIA-2016 to 2017 and it is now EQUILIBRIA-2018 which will be conducted during 23rd and 24th of March 2018.
EQUILIBRIA ? 2018 will create a great platform to researches, scientists, academicians and industry experts to share experiences, discuss research findings and acquire the desired knowledge for practical exercise. We hope this would provide deep insights into innovations, challenges and growth opportunities in diversified domains of Biotechnology.
The symposium consists of various sessions including keynote, plenary and parallel sessions. Each session will be addressed by outstanding experts who will highlight recent advances in various facets of biotechnology. It will also offer budding scientist an opportunity to present their work in front of eminent experts of their field.
Published onMar2018
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
Noise Pollution and Air pollution and their Impacts on Health & Effective Control
In association with Kerala State Pollution Control Board & Indian Medical Association, we are conducting a two day awareness program on the alarming effects of “Noise Pollution and Air pollution and their Impacts on Health & Effective Control”, during 26th and 27th March 2018. The program is sponsored by Department of Environment and Climate Change, Government of Kerala. As we are all aware of the effects of air and noise pollution, affecting the sustainability of the environment and human health, we are aiming at disseminating awareness on their effects especially during special events like festivals, to the base level knowledge diffusers. We expect through this workshop, a workforce of teachers, PTA representatives, NSS volunteers and Nodal officers of Schools and Colleges, who will able to disseminate the outcome of this program through their students, friends and society at large. The program will be led by Faculty experts, Activists, Technical Experts from Pollution Control Board and a Panel of Doctors.
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
Workshop on 3 D Printing at SJCET, Palai
The ASME SJCET student Chapter is organizing a 3D Printing Workshop on Saturday, 24/03/2018 by Mr. Sreenath P., CEO, EMI Products, Bangalore with live demonstration.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
One day intercollegiate technical event ‘CSI STUDENT SUMMIT'
The Department of Computer Science and Engineering of Toc H Institute of Science and Technology , in association with the Computer Society of India is organizing a one day intercollegiate technical event ‘CSI STUDENT SUMMIT’ on 17th March 2018.
TIST CSI Student Branch actively organizes technical and social commitment activities, since its establishment in 2009 under Cochin Chapter. We have won the prestigious ‘Best Student Branch Award’ from CSI consecutively for the 6 years since 2012. Our student members secured ‘Highest Committed Student Branch Activist Award’ for 3 years.
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
Print 3D
Presenting *PRINT 3D* a 3D printing workshop aimed at developing young engineers for a future industry.
Brought to you by *CULT A WAY 2018* and *Production Engineering Students Association SCT Chapter* in collaboration with *Think3D*, the country's largest 3D printing platform.
The workshop offers a hand-on experience on 3d printing and 3d scanning.
*Learn the basics of different methods of 3D printing
*Application level approach
*3D modelling
*Step by step instructions and hands on sections
*basics of 3D scanning
*Industrial use of 3D printing, interactive sections.
Come seize the opportunity and make the best out of it.
Venue : SCT College of Engineering
We are happy to inform that the Department of Computer Science & Information Technology of College of Engineering Perumon is organizing a National Conference on “Advances in Informatics and Computing Technology’18” (AICT’18) at College of Engineering Perumon, Kollam on 20th and 21st March 2018. All the papers presented at the conference will be published in conference proceedings.
Conference at GURUDEVA INSTITUTE OF SCIENCE AND TECHNOLOGY
International Conference:ICCISCON'18 @ Gurudeva Institute of Science & Technology (GISAT), Kottayam
ICCISCON'18 is jointly conducted by the Department of Computer Science Engineering & Department of Electronics & Communication Engineering of Gurudeva Institute of Science & Technology (GISAT).
To provide an opportunity to research scholars, delegates and students to interact and share their experience and knowledge in technology application. ICCISCON 18 will provide an excellent international forum for sharing knowledge and results in Recent Challenges in Cyber Security, Image Processing, Signal Processing, Communication, Optimization in VLSI & Embedded Systems & Networking. The aim of the Conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet the share cutting-edge development in the field.
Date of Conference: 6th & 7th April 2018
Papers should be send to:icciscon@gisat.in
Last Date for submission of paper: 10-03-2018
For more details log on to: http://icciscon.in
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
Faculty Development Program on "Emerging trends in Embedded Systems"
A three day Faculty Development Program on " Emerging trends in Embedded Systems" sponsored by APJ Abdul Kalam Technological University, being organized by Department of Electronics & Communication Engineering from April 18, 2018 to April 20, 2018. The programme is intended for all faculty members from Engineering colleges affiliated to APJ Abdul Kalam Technological University. The registration form duly signed by the concerned authority should reach the course coordinator on or before 10-4-2018.Coordinator – Dr.Gnana Sheela K (sheelabijins@tistcochin.edu.in, +91 9495896468.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY,Faculty Development Program on "Emerging trends
A three day Faculty Development Program on " Emerging trends in Embedded Systems" sponsored by APJ Abdul Kalam Technological University, being organized by Department of Electronics & Communication Engineering from 18th to 20th April 2018. The programme is intended for all faculty members from Engineering colleges affiliated to APJ Abdul Kalam Technological University. The registration form duly signed by the concerned authority should reach the course coordinator on or before 10-4-2018.
Coordinator – Dr.Gnana Sheela K (sheelabijins@tistcochin.edu.in, +91 9495896468.
Published onMar2018
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
WORKSHOP ON TOTAL STATION AND AUTOLEVEL
This workshop is a platform where in surveying with Total Station and Autolevel will be dealt in Morning session and Afternoon sessions
Seminar at MOHANDAS COLLEGE OF ENGINEERING AND TECHNOLOGY
Colloquium2018
MOHANDAS COLLEGE OF ENGINEERING AND TECHNOLOGY, ANAD, NEDUMANGAD take great pleasure and privilege in inviting you to Mohandas College of Engineering and Technology, Trivandrum for participating in Colloquium?18. The fest provides exposure for all students from various colleges to come together to compete & present their talents and skills in the technical area. Colloquium'18 aims to be a platform for the Paper presentation, online coding, Innovative ideas, Technical quiz, Robotics etc.
III National Conference on Future Technologie in Power,Control & Communication Systems
NFTPCOS'18 at providing a platform for students,research scholars,faculty members & industry people to present and discuss most recent innovations,trends and practical challenges in the field of power,control and communication systems
Seminar at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
Molecular Tools and Disease Detection
Biotechnology Department of Sahrdaya College of Engineering & Technology is organising a two day seminar on 'Molecular Tools and Disease Detection', co-sponsored by Sahrdaya College of Engineering & Technology & Kerala State Council for Science, Technology & Environment (KSCSTE).
Dates : 16th & 17th March, 2018
Work Shop at MUTHOOT INSTITUTE OF TECHNOLOGY & SCIENCE
TRAFFIX
Eternia, Civil Engineering Association, in association with Indian Concrete Institute & The Institution of Engineers, is Organizing TRAFFIX, an Idea presentation Competition
Conference at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
Second National Conference on Structural Engineering and Construction Management SECON'18
SECON?18 is the second edition of the National Conference on Structural Engineering and Construction Management conducted by the Department of Civil Engineering of Federal Institute of Science And Technology (FISAT). The main objective of the conference is to create a platform for disseminating knowledge on emerging technologies in the fields of Structural Engineering and Construction Management. The conference is also designed to give exposure to young and emerging engineers and provides a platform for presenting their ideas and research findings to the community. The first conference SECON?17 was a success, attracting eminent speakers from academia and also a good number of research papers in the respective fields. SECON?18 intends to focus on Prefabricated Structures and Non-Destructive Testing in addition to its regular themes.
The Conference aims to thrust the work from industry and academia on the following topics:
(i) Prefabricated Structures
(ii) Non Destructive Testing
(iii) Analysis and Design of Steel & Concrete Structures
(iv) Numerical Modelling and simulation in Structural Engineering
(v) Construction Methods, Materials & Sustainability
(vi) Construction Safety and Management
(vii) Construction Planning, Scheduling and Control
Published onMar2018
Conference at K R GOURIAMMA COLLEGE OF ENGINEERING
Pragati 2K18 - Inter Collegiate and School Level Mega Quiz Fest
Pragati 2k18, is a National
Intercollegiate and School Level Quiz Fest, will be held on National
Science day, 28th February 2018 at K. R. Gouriamma College of Engineering Organised by the Department of Information Technology, KRGCE.
The Prize money of INR 20,000/- will be awarded, in which INR
12,000/- for College Level and INR 8,000/- for School Level
winners. All other contestants will be awarded with
participation certificates.
Quiz Master: Sri Rahul Easwar
International Conference on Vision 2020: Competing in a World of Sectors without Borders
Vision 2020 :Competing in a World of Sectors without Borders, is the second International conference organized by CET School of Management. The theme of the conference is based on India Vision 2020 and is an endeavour to pay homage to one of the greatest visionaries India has ever had; Dr. A. P.J. Abdul Kalam. The last date for submission of abstracts has been extended to March 2, 2018 and the last date for registration for the conference is March 6, 2018.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
REVIT ARCHITECTURE
3 Day workshop on REVIT ARCHITECTURE organised by Department of Civil Engineering.
Published onFeb2018
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
TECHFEST AT ST. JOSEPH'S COLLEGE OF ENGINEERING & TECHNOLOGY, PALAI
St. Joseph's College of Engineering and Technology, Palai is organizing a two days intercollegiate technical fest “ASTHRA” on 16th and 17th of February 2018. The aim of Asthra is to create a platform for students from various technical institutions to interact and assess themselves by participating in different technical and non-technical competitions. The vision of Asthra is to instill a technical spirit in the youth and inspire innovations in their areas of expertise and to bring out their technical talents.
Published onFeb2018
Conference at KMCT COLLEGE OF ENGINEERING
METANOIA'18
Two day National Level Technical Symposium conducted by Department of ECE, Department of EEE and Department of AE&I
Conference at MES COLLEGE OF ENGINEERING & TECHNOLOGY
NACET2K18 National Conference
National Conference on Emerging Technologies.
Published onFeb2018
Work Shop at AMAL JYOTHI COLLEGE OF ENGINEERING
Capacity Development for Engineering Teachers
Faculty development programme on "CAPACITY DEVELOPMENT FOR ENGINEERING TEACHERS?, 22 - 24 February 2018.
The main objective of the workshop is to build the capacity of faculty to design, transact and assess, deliver courses with Educational Technology tools like Open Educational Resources and constructivist pedagogy based Free Open source Moodle -MOOC platform.
The workshop is hosted by Centre for Continuing Education (CCE) of Amal Jyothi College of Engineering with coordination from the Dept. of Computer Science & Engg., AJCE and supported by the KTU in association with ISTE Kerala Section.
Research Methodology – Writing Effective Research Articles
One Day Workshop on “Research Methodology – Writing Effective Research Articles”, hosted by Department of Electrical & Electronics Engineering on 28th February 2018. The details are attached
Conference at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
National conference
The Department of ECE, Vidya Academy Of Science and Technology, Thrissur is organizing a NATIONAL CONFERENCE ON 'ADVANCED INNOVATIONS IN VLSI, EMBEDDED SYSTEMS, COMMUNICATION AND SIGNAL PROCESSING' on March 09th and 10th of 2018.
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
ADVANCED SURVEYING TECHNIQUES
Two day Workshop on Advanced Surveying Techniques.
Auto Level and Total Station for Civil Engineering Students organised by Department of Civil Engineering.
Published onJan2018
Seminar at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
Research Methodology: A step into the world of Research
The Department of Electronics & Communication Engineering, SCT College of Engineering, Pappanamcode, Thiruvananthapuram is organising a KTU Sponsored and DTE approved FDP on “Research Methodology: A Step into the World of Research” from 05th to 09th February 2018.
he programme is open to the teaching Faculty/Research Scholars of AICTE approved institutions. Engineers and professionals from relevant industries are also eligible. Co-Ordinators: Prof (Dr). Sheeja M. K., & Prof.Bindu V
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Faculty Development Programme on "Advances in Structural Engineering" - January 22 - 27, 2018.
Vidya Academy of Science & Technology, Thrissur, is organizing a Faculty Development Programme on "Advances in Structural Engineering" sponsored by APJ Abdul Kalam Technological University during January 22 - 27, 2018. The main objective of the programme is to make the faculty members familiar with advanced structural analysis and design using latest codes. Course coordinator - Prof. K V Leela (leela.k.v@vidyaacademy.ac.in, +91 9447668683).
Conference at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
National Employability Conclave
Greetings from UKF College of Engineering and Technology,
UKF College of Engineering and Technology proudly invites you and your esteemed institution / Organization to participate in the National Employability Conclave on 22 & 23 rd January 2018.It is a platform where academicians and industry meets.Faculty members / TPO's will be able to interact with HRs & CEOs of reputed companies.We also conduct contest for the faculty members, IEDC Coordinators and Students. Kindly go through the brochure attached below.
for more details visit : www.ukfcet.ac.in/nec.php
Work Shop at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
Faculty Development Programme on "Advanced Design of Structures"
Faculty Development Programme on "Advanced Design of Structures" at Mar Baselios Christian College of Engineering and Technology from 11th January 2018 to 13th January 2018.
This Faculty Development Program (FDP) is intended to provide participants an overview of various principles of ?Advanced Design of Structures?, which is useful course for Faculty, Research Scholars and PG Scholars in Structural Engineering.
Course Coordinator
Dr Nivin Philip MTech, PhD, MIE, CEng
9447282752
Work Shop at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
Computer Aided Civil Engineering Lab
We are pleased to invite you to attend Two Days Workshop on "Computer Aided Civil Engineering Lab" on 18-19 January 2018, jointly organized by Department of Civil Engineering, UKF College of Engineering and Technology and Inter CAD Systems Pvt. Ltd. at UKF College of Engineering and Technology, Parippally, Kollam-691302.
The workshop aims to provide an excellent platform for learning/understanding the Computer Aided Civil Engineering Lab as per KTU syllabus, included in the curriculum of the sixth semester. The programme mainly concentrates on Analysis and design of steel and RCC elements using STAAD and use of Project Management software "Primavera” and is of great use to the faculties of various engineering colleges.
Applicants from AICTE approved Engineering Institutes should forward applications to this e-mail id (ugceukfcet@gmail.com) in the format attached on or before 12/01/2018. The candidates will be intimated regarding their selection by email on 14/01/2018.
Participants may bring the application along with the registration fee of Rs. 100/- at the time of registration.
A work book covering the entire course will be provided free of cost along with the CD having trial version of STAAD and Primavera.
Hence we request you to circulate the brochure attached here with this e-mail among faculties/ friends in your respective departments and make use of this opportunity.
WORKSHOP ON OUTCOME BASED NBA ACCREDITATION WITH EMPHASIS ON HOW TO PREPARE SAR
Understanding the importance of improving the quality status of technical institution and relevance of NBA accreditation , the department of Mechanical Engineering, College of Engineering Perumon is organising a three days ?workshop on outcome based NBA accreditation with emphasis on how to prepare SAR? from 11-13 January 2018 at College of Engineering Perumon.
Conference at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
NATIONAL CONFERENCE ON COMPUTATIONAL HEAT TRANSFER, FLUID FLOW AND ENERGY SYSTEMS
Hosted by SCT College of Engg. ASME Student Chapter, SCT College of Engineering, and The Institution of Engineers(India) .
Conference themes ---- Renewable Energy, Energy Conservation, Heat Transfer and Fluid Flow, Applied Thermal Engineering, Energy Materials, Sustainable Design and Green Technology.
Call for paper presentations, of the specified themes before 31/12/2017. All accepted papers will be published in the form of Conference proceedings and selected in IEI National Journal
Papers shall be mailed to ncsctce@gmail.com
Contact Dr. G Mohan . 9496180175
Sri.Rajesh S P, 9447401734
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
FDP on Financial Planning & Investment Solutions from29.01.2018 to 31.01.2018
Investment Analysis and Portfolio Management, Financial Planning Strategies to Investors, Risk in Investment, Portfolio Diversification and Derivative Products, Taxation ( Personal & Corporate tax), Practical sessions and discussion on stock trading, mutual funds, insurance products and MM instruments.
Seminar at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY TECHNICAL CAMPUS
Energy Conservation Drive- An awareness programme on Energy Conservation and Renewable Resources
As a part of World Energy Conservation Day, Vidya Academy of Science and
Technology Technical Campus (VAST-TC), Kilimanoor, is planning to organize an
awareness programme on Energy Conservation and Renewable Resources in association
with Kilimanoor Grama Panchayath, Energy Management Centre, Kerala, IEEE Life
Member Affinity Group, IEEE Power and Energy Society, IEEE Women in Engineering,
IEEE Young Professionals and NSS unit of college. The objective of the programme is to
make people aware about the importance of saving energy.
The programme will be held at 9.30 am on 16th of December 2017at Kilimanoor
Grama Panchayat Community Hall.
Contact : +919809266546
FDP -Topic:"Security and Forensics in Cyber Space:Advance s and Future Directions"
FACULTY DEVELOPMENT PROGRAMME
ON
"SECURITY AND FORENSICS IN CYBER SPACE:ADVANCES AND FUTURE DIRECTIONS"
19-21 December 2017
Sponsored by APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY
Organized By
Department of Computer Science and Engineering
ER&DCI INSTITUTE OF TECHNOLOGY
CDAC TRIVANDRUM
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY TECHNICAL CAMPUS
FDP on Recent Trends in Advanced Materials
The basic objective of the programme is to expose the participants to enhance the teaching skills in advanced material science. Advanced materials and Product Development are important areas of research in Engineering Science and Technology, and requires a vital focus on bridging the gap between academia and industries. More recently, there are increasing demands and challenges, more than ever before, for the researchers and engineers to develop new materials, processes and technologies to become the vanguard of next generation industries and to adapt and change for more sustainable designed products.
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
KTU Sponsored FDP on ?Enhancing Soft skills for Effective Teaching?
The objective of this FDP is to incorporate all aspects of generic skills that include the cognitive elements associated with non-academic skills. A carefully designed and well planned education system is critical for developing such human capital. The teaching and learning processes in institutions of higher learning should be capable to provide such knowledge and skills to future graduates.
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
Faculty Development Program on "Embedded Systems"
A three day Faculty Development Program on "Embedded Systems", being organized at Toc H Institute of Science and Technology, Arakkunnam, Ernakulam from December 13, 2017 to December 15,2017. It is a certificate program being conducted by KELTRON (A Govt of Kerala undertaking) in Embedded systems with orientation to applications in robotics.
5 Days FDP on System Design MATLAB sponsored by APJ Abdul Kalam Technological University, hosted by Department of Electrical & Electronics Engineering during 18th to 22nd December, 2017.This training covers the topics
Review of fundamental concepts in Control System Engineering.
1)Hands on experience in MATLAB & Simulink to demonstrate the applicability of Control Principles.2)Detailed analysis on Complex topics in Control System Engineering.3)
Applications of Signal Processing in MATLAB & Simulink.4)Optimization Techniques in Research Perspectives in Control System Engineering.
FDP on INDUCTION TRAINING PROGRAMME FOR YOUNG TEACHERS
College of Engineering Kidangoor is organizing a 3 day Faculty Development Programme on "Induction Training Programme for Young Teachers" from 19th to 21st December 2017 sponsored by APJ Abdul Kalam Technological University. The programme is intended for all faculty members of any specialization from Engineering colleges affiliated to APJ Abdul Kalam Technological University.The registration form duly signed by the concerned authority should reach the course coordinator on or before 16-12-2017.
Work Shop at SREE NARAYANA GURUKULAM COLLEGE OF ENGINEERING
FDP on "Energy Conservation, Management and Auditing"
The basic objective of the programme is to expose the participants to energy conservation and energy efficiency improvement techniques with real time case studies. The training programme also aims to impart intensive inputs on the scope and methodology of energy audit and energy efficiency evaluation of plant energy systems with case studies and interactive plant visit.
The programme participants are expected to get motivated to appear the BEE national certificate examination for energy managers & energy auditors and to get elevated their professional skill to serve the society in a more effective way.
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
FDP on Design & Development of Embedded Systems
The objective of this FDP is to prepare the participants to enhance the teaching skills in embedded systems. The course is structured to give theoretical background and hands-on experience in hardware & software development. The programme will be a comprehensive workshop covering 8051 and ARM architecture, building blocks, key features, programming and other aspects of the same. This FDP will also provide hands-on practice on KEIL Simulator to achieve the design goals.
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
Boot camp Workshop for Faculty on Design Thinking
As a precursor event for KETKON-TECON 2018,
A Boot camp Workshop is organized for Faculty members on the much relevant theme DESIGN THINKING.
The course is supported & sponsored by Kerala Startup Mission (KSUM) & resource is pooled from Industry. (Brochure is attached)
Date: 28th and 29th of December, 2017
Venue: Sahrdaya College of Engineering & Technology
Design Thinking is a much widely used methodology for Problem solving, Project Planning, Product design, Startup mentoring, Innovation. This Workshop is particularly useful for Faculty members engaging KTU courses like Design & Engineering and Design Project.
Eligibility: Regular Faculty from government/aided/ self-financing engineering college in Kerala are eligible for applying to this workshop.
Registration Fee : Rs. 500 for two days inclusive of Lunch ( Accommodation can be arranged for participants from distant colleges subject to availability)
The number of external participants is limited to 30 and the selection is on the first come first serve basis. Selected candidates will be intimated through e-mail.
Last Date to register is 20th Dec 2017.
Register Here :
https://goo.gl/forms/e51iiJ4Yfv5xpEkl2
Welcome to Join..!!
Contact: Ms. Vini Jose - 9447149106, 9946983296
Thanks & Regards
Ms. Vini Jose
Training & Placement Officer
Sahrdaya College of Engineering & Technology
Kodakara, Thrissur.
www.sahrdaya.ac.in
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
Faculty Development Programme on GeoGebra
GeoGebra is an interactive geometry, algebra,statistics and calculus applications intended for learning & teaching mathematics & science from primary to university level.
Work Shop at GOVT. ENGINEERING COLLEGE, BARTON HILL
Modelling and Simulation for Automotive Design
Four day workshop on Modelling and Simulation for Automotive Design.
Date: 29.11.2017 to 02.12.2017
Venue: Govt. Engineering College BartonHill
Seat Limit: 25
Fees: Yes, details in brochure
Associating Partners: Tata Elxsi, National Instruments, Altair
Coordinators: Prof. Gopakumar S., Prof. Rajesh N.R., Prof. Anish K. John
Work Shop at ST JOSEPHS COLLEGE OF ENGINEERING AND TECHNOLOGY PALAI
ISTE Short Term Training Programme on Guidance and Counselling
Indian Society for Technical Education (ISTE) Staff Chapter, St.Joseph's College of Engineering Tech. Palai in association with ISTE, Kerala Section is organizing a five day short term training programme on Guidance and Counselling from 04th to 8th December 2017 at St.Joseph's College of Engineering and Technology, Palai. This workshop aims at (a) Strengthening the expertise and confidence of teaching professional in guidance and counselling (b) To make mentoring more effective.
Bamboo is one of the oldest traditional building materials used by mankind. The main aim of the programme is to make an awareness of the usage of Bamboo and to promote research in the area. The programme covers the various species of Bamboo, the present scenario in Bamboo cultivation and use, various treatment methods, structural features, construction practices, Bamboo composites and product design features and need for the development of Bamboo as an engineering material.
Work Shop at GOVERNMENT COLLEGE OF ENGINEERING KANNUR
OUTCOME BASED TECHNICAL EDUCATION AND ACCREDITATION
An STTP on " OUTCOME BASED TECHNICAL EDUCATION AND ACCREDITATION" is scheduled to be conducted at Government College of Engineering Kannur during 4-8 December 2017.
The programme will be highly useful for the colleges going for accreditation in the near future.
Published onOct2017
Work Shop at MANGALAM COLLEGE OF ENGINEERING
National level robotics championship, In Association with Entrepreneurship Cell , IIT Kharagpur
Round I: 2 days Robotics workshop for begineers
Round II: Zonal level Competition @ Mangalam College of Engineering, Kerala
(Top 3 teams will be selected for Grand Finale. Each team will consist of 5 members)
Round III: Grand Finale @ IIT Kharagpur
Registration Fee: INR.1000 per participant
Registration link: https://goo.gl/forms/ckwA3O4p5OqwkAYB2
Deadline for registration: 4th January, 2018
Free take away kit*
Student Co-ordinators: Mr.Anal.E.S, Contact: +91 9400450355
Mr.Alsufiyan Nazim, Contact: +91 7736598136
Staff Co-ordinator: Dr.T.D.Subash, Contact: +91 9447691397
Registration Fee Payment Details
Wire Transfer:
Account No: 57021525206
Account Holder Name: Mangalam College of Engineering
IFSC: SBIN0070114
Bank Name: State Bank of India
Branch: Ettumanoor
Bank Address: Ettumanoor, Kottayam
Incase Demand Draft infavour of “The Principal, Mangalam College of Engineering” Payable at Ettumanoor
The Demand Draft or payment receipt will reach the Co-ordinator on or before 04.01.2018 to the address mentioned below:
Dr.T.D.Subash
Professor, Dept. of EEE
Mangalam College of Engineering
Ettumanoor, Kottayam, Kerala, India – 686 631
Contact: +91 9447691397
Email: t.subash@mangalam.in
Work Shop at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
Ignite 2017 - IEEE WIE Workshop
The most effective way to do it is to do it_
Some of us have great runways already built for us. If you have one, take off.
But if you don't have one, realize it is your responsibility to grab a shovel and build one for yourself and for those who will follow after you.
Here we hand you the shovel to build your life up, at *Ignite 2017.*
Registration fee:
IEEE Members: *Rs.600*
Non-Members: *Rs.900*
Venue: UKF College of Engineering and Technology*
Date: November 10th, 11th and 12th, 2017*
To register : http://ignite.ieee-link.org/
_In the end we only regret the chances that we didn't take_
Conference at MOHANDAS COLLEGE OF ENGINEERING AND TECHNOLOGY
TECHSYNOD'17 -National Conference & workshop
National conference & workshop TECHSYNOD'17 on " Advances in Bioenergy & Biomaterials and Advances in Mechanical Engineering & Mechatronics' during 19th to 21st December for Faculty and Researchers.
Work Shop at GOVT. ENGINEERING COLLEGE, BARTON HILL
Inner Awareness and Creative Excellence
The Translational research & Professional Leadership Centre ( TPLC ) , GEC Barton Hill is taking a step in this direction to mould our students into socially responsible professionals. College time is a golden opportunity to discover their full potential, purpose and prepare themselves to excel in work and life. Hence, we offer a unique program for our students ? ?INNER AWARENESS & CREATIVE EXCELLENCE ? workshop so that the students can experientially discover their inner strengths and live life creatively, authentically and with excellence in their work.
Published onOct2017
Conference at TRINITY COLLEGE OF ENGINEERING
GENERIX-2017
The department of EEE is organizing a State Level Conference on ' Energy Efficiency, Conservation and management at our campus during 20-21 October 2017. This event is co-sponsored by Energy Management Center, Govt of Kerala.
Published onOct2017
Work Shop at ERANAD KNOWLEDGECITY TECHNICAL CAMPUS
UNITY 2K17 - VR WORKSHOP
Hands on workshop - Virtual Reality, Application Development
Published onOct2017
Work Shop at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
Two-days National Workshop on IoT Using Arduino
The Internet of things (IoT) is the network of physical devices, vehicles, and other items embedded with electronics, software, sensors, actuators, and network connectivity which enable these objects to collect and exchange data.
Let's say, You are planning to visit abroad and going to check in to a hotel. Would you like to know the temperature, humidity state of the hotel in real time? More you know the better, right?
How can we get this information?
Answer is simple - IoT.
The innovation and Entrepreneur development centre and department of ECE, UKFCET along with IEEE day jointly organise a two-day national workshop on IoT using Arduino during�October 07th - 08th, 2017.
Join us, Learn about IoT for weather monitoring system from scratch.
At the end of workshop, compete among all registered teams.
Top performing team(s) win a chance to compete in IUCEE Challenge 2018
Resource person from IIT Kanpur (Alumni)
Mr Shashank Yadav
Takeaway Kits includes :-
ATmega328P
Arduino Uno Development Board
ESP-8266 WiFi Module
DHT Sensor
Resistor
Breadboard
Connecting wires
Registartion�
Those who are interested can register in the link given below
https://docs.google.com/forms/d/e/1FAIpQLSeGEE5x5t6cI8uLhK_uvJFWs1zuzyire5H4rpDZkCKgL58ubA/viewform?usp=sf_link
For more info about challenge visit,
http://www.skyfilabs.com/competitions/iucee-challenge-2018
For more details about the program at college, visit
http://www.skyfilabs.com/payonline/details?id=iot-using-arduino-workshop-in-ukf-college-of-engineering-and-technology-kollam-3965
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
TRIODCE 2
Seminar on Sustainable solid waste management by Dr. Jai M Paul of MACE Kothamangalam.
Published onOct2017
Work Shop at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
ICEFOSS-2017
ICEFOSS is a Free Software Conference organized by FISAT Free Software Cell (FFSC). ICEFOSS'17, scheduled on October 6,7 2017 is the sixth edition of this conference.
Published onSep2017
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
SCIENCE & ENGINEERING EXHIBITION 'CONNECTING TECHNOLOGY TO VILLAGES"
Lourdes Matha College of Science and Technology is organizing a Science and Engineering Exhibition in our campus on 5th and 6th of October 2017 under the theme ?Connecting Technology to Villages?. The Exhibition also covers various competitions for the students of High School, Higher Secondary, Polytechnics and Engineering Colleges.
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
Entrepreneurship awareness programme
A programme organised by IEDC of MESCET and District Industries Dept. to develop the capacity of students for entrepreneurship.
Published onSep2017
Conference at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
T.I.M.E. 2017 - TECHNOLOGY AND INNOVATION IN MATH EDCATION
he main theme proposed are follows:
THEME 1: Use of technology in the mathematics classroom
THEME 2: Use of innovative teaching aids
THEME 3: Mathematics Modelling and Applications in School Mathematics
THEME 4: Mathematics Laboratory Activities
THEME 5: Mathematics Curriculum and Assessment & Papers on general topics.
website: http://www.time2017.in
Seminar at MES COLLEGE OF ENGINEERING, KUTTIPPURAM
National Seminar on Disaster Management
We are planning to conduct a National Seminar on Disaster Management in the month of August (21st to 26th, 6 days ) 2017 at MES College of Engineering Kuttippuram with the co-sponsorship from KSCSTE, Govt. of Kerala, which will be very useful for faculty members and students (both UG&PG) in a broad perspective.
Work Shop at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
HACK VITA - ETHICAL HACKING WORKSHOP
TWO DAYS ETHICAL HACKING WORKSHOP ON 12/08/2017 & 13/08/2017. for registration & more details please contact : Student Coordinator:- Mr. Nidhin shiju : 8137902054, staff Coordinator:- Prof. Jithin Jacob : 9020604270
Faculty Development Program and Workshop on Digital Signal Processing and IoT from 24th July to 28th July at the Department of Electronics & Communication Engg, Marian Engineering College
IEEE workshop on 'Design of an Electrical System of Multi Storey Building Complex'
IEEE Kerala Power & Energy Society (PES) is organizing a one day workshop on 'Design of an Electrical System of Multi Storey Building Complex ', scheduled on 29th July at Marian Engineering College Kazhakoottam,
Time: 9.00 AM to 05.00 PM
Venue: IEDC Seminar Hall
Course Faculty:
Mr. A. G. Hareendralal, Chair, IEEE PES Kerala chapter.
Mr. C. Jaganathan, Former Deputy Chief Engineer, KSEB.
Mr. Bipin Sankar Periyamana, Planning Engineer, Sharjah Electricity and Water Authority.
Conference at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
T.I.M.E.2017 - TECHNOLOGY AND INNOVATIONS IN MATHEMATICS EDUCATION
Main themes proposed are:
Use of technology in the mathematics classroom
Use of innovative teaching aids
Mathematics Modelling and Applications in School Mathematics
Mathematics Laboratory Activities
Mathematics Curriculum and Assessment & Papers on general topics
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
5 day Student Internship Programme on " CNC Part Programming & Hands-on Machine Training" from 27/7/
5 day Student Internship Programme on " CNC Part Programming & Hands-on Machine Training" from 27/7/
Published onJul2017
Work Shop at MAR BASELIOS COLLEGE OF ENGINEERING AND TECHNOLOGY
FDP on The Product Development of an IoT Device
The program deals with Product Development process of an IoT (Internet of
Things) technology. The objective of the program is to develop practical understanding
of the engineering applications of emerging technology in fields of Design,
Development and Validation. Scope of the program includes comprehension of market
applications through case study illustrations and acquiring practical experience through
hands-on sessions. Targeted to reach out to Faculty of Mechanical, Civil, Electrical and
Electronics departments, the program strives to impart solution to academia in
integrating trending technology with emerging focus in U. G. Curriculum on Design Thinking
and cross-functional product development projects.
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
International Faculty Development Program (FDP) on High Performance Computing & Data Science
The International Faculty Development Program (FDP) on High Performance Computing & Data Science is designed to provide an in-depth understanding of the HPC cluster. It will cover topics such as (1) submitting and monitoring jobs (2) optimizing memory and file system usage etc. The lectures organized as a part of the FDP will provide a strong foundation on GPU computing, CUDA APIs, Data analytic tools including Apache Spark. Apache Spark is a powerful open-source distributed computing platform that can be employed as a processing engine for Hadoop, Flume etc.
Conference at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
TIME 2017
TECHNOLOGY AND INNOVATIONS IN MATHEMATICS EDUCATION
jointly by Rajagiri School of Engineering & Technology and IIT Mumbai.
Published onJul2017
Work Shop at UKF COLLEGE OF ENGINEERING & TECHNOLOGY
ORIENTATION PROGRAM FOR 2017 BATCH
BRIDGE COURSE
Published onJul2017
Work Shop at MARIAN ENGINEERING COLLEGE
Faculty Development Programme on "Theory of Computation"
Faculty Development Programme on "Theory of Computation" conducted by Department of Computer Science & Engineering, Marian Engineerin College during 3rd July to 7th July.
Published onJul2017
Work Shop at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
FDP on Composite Materials and their Applications
Department of Mechanical Engineering of Ahalia School of Engineering & Technology is organizing a two day Faculty Development Program for all teaching faculties and PG students of KTU affiliated colleges on the topic "Composite Materials and Their Applications". The sessions will be handled by expert faculties from reputed Engineering Colleges in Kerala.
With Regards,
Seminar at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
One day Knowledge Enhancement Programme on Soft Computing and its application
The Department of Computer Science and Engineering, MBC College of Engineering & Technology, Peermade is organizing a one day knowledge enhancement programme on Soft Computing and its application on 12 th July 2017.
Resource person for this session is Dr. David Solomon George, Associate Professor, Department of ECE, Govt. Engineering College Idukki.
Participants are requested to register their names in advance through the following link.
https://www.mbcpeermade.com.
The fee for registration is Rs.300/- .
For further queries contact:
Mr. Ghilby Varghese Jaison Mobile: 9496324935
Ms. Sijimol A.S. Mobile: 8547010231
Five day - Faculty Development Program - Artificial Intelligence?
Department of EEE is planning to organize a Five day Faculty Development Program on Artificial Intelligence? from 24th -28th July 2017.
The sessions will be handled by Dr Geethamani, Associate Professor, School of Electrical Engineering, VIT, Vellore and Mr Bileesh Babu, Research Scholar, Machine Learning, VIT, Vellore. Link for Registration : https://goo.gl/forms/WNxcN9CZXP9nw1753
Contact :
Prof. Laly James, Head - Department of EEE
Ph : +91-8086350124 , +91-9605063204
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
Student Internship Programme from on " NDT: Non-Destructive Testing " in assoc
Department of Mechanical Engineering, LMCST, is organizing a Student Internship Programme from 10.07.17 to 14.07.17 on " NDT: Non-Destructive Testing " in association with 'United NDT Inspection And Testing Centre' for the Third, Fifth and Seventh semester B.Tech Mechanical Engineering Students.
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
"Application Programming for Mobile Devices"
MCA department is committed to develop quality IT professionals by providing concept oriented subject knowledge through high quality teaching supplemented with practical knowledge & skills
objects
1.Courses focuses on the prescribed syllabus of both KTU & Kerala University.
2.Android is known to be one of the most versatile and most used operating systems
3. You can make your own easily and show your true potential to the world of google and android
Conference at MAR BASELIOS COLLEGE OF ENGINEERING AND TECHNOLOGY
NATIONAL CONFERENCE ON MATHEMATICAL METHODS FOR ENGINEERING APPLICATIONS(NACMMEA-17)
The aim of this conference is to provide a venue for the interaction between academicians in Applied Mathematics and various Engineering streams.The conference includes paper presentations and lecture series by eminent Professors from IISc, IIT and other similar institutions.
Industry Certified workshop in Welding Technology and Characterisation
"Welding" & its Quality assessment through Non Destructive Testing and Metallography
Training starts on : 1st batch(July 10-14), 2nd batch (July 17-21), 3rd batch(July 24-28)
Eligibility: B.Tech in Mechanical/Automobile (Completed & On going)
Duration : 5 days
Industry based Internship in Heavy Duty Automobile Technology
Duration :6 days
Eligibility : BTech student of any domain
Venue : Amal Jyothi College of Engineering, Kanjirapally
Training starts on every Monday from 19 JUN 2017.
Mode of Teaching : 95% hands-on training at Eicher Training Center
Contact No: +919497688400, +919400489110
email id: -hsreeram@amaljyothi.ac.in; cvanoop@amaljyothi.ac.in
Course Contents
Introduction to Automobile Technology
Constructional details and working of automotive components using Cut-sections and models
Dismantling, Inspection and assembling of following sub-systems:
? Engine
? Clutch assembly
? Gearbox
? Front and rear axles
? Steering systems
? Braking systems and tyres
? Electrical and electronic systems
Short term Training programme from 7 to 9 June 2017.Topics include interdisciplinary projects, hands on practical sessions on design, analysis and handling microprocessors and sensors, industrial case studies.
Work Shop at RAJADHANI INSTITUTE OF ENGINEERING AND TECHNOLOGY
Smart India Hackathon 2017 Grand Finale
The ‘Grand Finale’ of ‘Smart India Hackathon 2017’, the world’s biggest digital product building competition will be hosted on April 1st and 2nd 2017simultaneously at 26 nodal centers across India.
The scale and reach of Smart India Hackathon 2017 is unprecedented and for the first time more than 29 government Ministries/Departments came together and posted their 598 problems for students seeking innovative solutions.
We, Rajadhani Institute of Engineering and Technology Attingal Thiruvananthapuram, are one of the Nodal Centers in Kerala with around 400 participants coming from different part of India. These students will work nonstop for 36 hours to build digital solutions which could be use full for improving the functions of different Ministries. Around 1200 teams comprising of 10000 plus students are competing in this grand finale.
Minister for Co-operation, Tourism and Devaswoms- Sri Kadakampally Surendran, Former ISRO Chairman - Dr. G Madhavan Nair, MLAs, Heads of various Central and State Departments and distinguished personalities are attending the event.
As a nodal center, we request your presence in the inauguration ceremony on April 1st 2017 at 8.00 AM and the Valedictory function at 9.00 pm on April 2nd 2017.
National Research Colloquium on Recent Advancements in Electrical Engineering
This is an excellent forum to exchange new ideas, technological changes and to take up effective research in the field of Electrical Engineering. The program also aims to give an exposure to the trends, issues and challenges in the areas and to provide a platform for interaction with experts from academia and industry in the relevant field.
The Department of Electronics & Communication Engineering, College of Engineering, Kidangoor is hosting a Research Colloquium on ?Electronics Engineering? on the 10th and 13th of March 2017.We have invited well-known speakers from IITs , NITs etc who have been engaged in various fields of research to take part in the colloquium. You can apply to the Colloquium by filling the online form given below.
https://goo.gl/forms/gZVX75gOh5opCVbL2
Please submit the hard copy of the application duly attested by the head of the institution at the time of registration on 10th March 2017.
The Centre for Continuing Education (CCE) & Department of Computer Science & Engineering, of Amal Jyothi College of Engineering, Kanjirappally in association with ISTE Kerala Section is organizing a Two-day workshop "Big Data Analytics with Hadoop" from 9th -10th March 2017.
The resource person for the workshop is Mr. Raghavendra Reddy, Senior Big Data Analyst at Maantt Global Services Pvt. Ltd.,Chennai.
Interested participants may email the duly filled registration form to cce@amaljyothi.ac.in . For more details please go through the information brochure and registration form.
Contact : Ms. Shiney Thomas,AP CSE,AJCE - 9495508855,
Ms. Fabeela Ali Rawther,AP CSE,AJCE - 9539248258
E-mail: cce@amaljyothi.ac.in
Conference at BASELIOS MATHEWS II COLLEGE OF ENGINEERING
IEE International Conference on Circuit,Power and Computing Technologies
BaICCPCT -2017 ia an IEEE conference on Circuit, Power and Computing Technoologies. It intetends to offer an energetic environment by bringing together Researchers, Academicians, Corporate & Industry Professionals, Technically sound Students and Entrepreneurs from various organizations all over the world under one roof which facilitates them to exhibit, exchange and confabulate their pioneering works on their appropriate topics of interest.
Research colloquium on "Research Opportunities In Computer Networks"
The research colloquium will provide an excellent platform for knowledge exchange between researchers and academicians working in different areas of Network Management & Security, Data Center Networks, Mobile Computing, Distributed Computing, Wireless Technology, Wireless Ad-Hoc & Sensor Network etc. It will give an opportunity to the young researchers to discuss with the distinguished experts and fellow participants. The programme also aims to give an exposure to the trends, issues and challenges in these areas. The main objectives of the programme are:
To orient young researchers to take up effective research in the field of Computer Networks.
To interact with experts from academia in the relevant field.
Published onMar2017
Seminar at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
One Day Seminar on Recent Trends in Cloud Security
The Department of Computer Science and Engineering in association with REACT, MBC College of Engineering & Technology, Peermade is organizing a one day seminar on Recent Trends in Cloud Security on 10 th March 2017. Resource person for the seminar is Dr.Sangeetha Jose , Assistant Professor, Department of IT, Govt. Engineering College Idukki.
Participants are requested to register their names in advance through the following link.
https://www.mbcpeermade.com. The fee for registration is Rs.300/- .
For further queries contact: Mr. Ghilby Varghese Jaison Mobile: 9496324935
Ms. Jisha Mariyam John. Mobile: 8301889349
Conference at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
National Conference on Technology Innovation in Mechatronics, Energy Management & Intelligent Commun
This conference invites original contributed papers in Technology Innovation in Mechatronics, Energy Management & Intelligent Communication. There will be invited talks on advanced topics by eminent experts and practicing professionals during the conference. Authors are requested to send research papers to nctimeic@lmcst.ac.in.
2nd National Conference on Future Technologies in Power,Control and Communication systems-NFTPCOS'
Organized by department of Electrical & Electronics Engineering
Published onMar2017
Seminar at MES COLLEGE OF ENGINEERING & TECHNOLOGY
TRIODCE2017
Expert talk by Sri.Najeeb C, a highly acclaimed Architect about the correlation between an Architect and a Civil Engineer.
Published onMar2017
Conference at COLLEGE OF ENGINEERING TRIKARIPUR
Research Colloquium On Power System Stability and Control
The research colloquium will provide an excellent platform for knowledge exchange between researchers, industrialists and academicians working in different areas of power engineering such as power generation, utilization, stability control, FACTS, renewable energy etc. It will give an opportunity to young researchers to discuss with the distinguish experts and fellow participants. The program also aims to give an exposure to the trends, issues and challenges in these area.
The main objectives of the program are;
1. To orient young engineers to take up effective research in the field of power engineering.
2. To interact with experts from academia in the relevant field.
Published onMar2017
Conference at COLLEGE OF ENGINEERING TRIKARIPUR
NCIPEC'17
Department of Electrical and Electronics Engineering of College of Engineering Trikaripur is organizing a national conference during 10-11 March 2017, sponsored by TEQIP II. The main thrust of NCIPEC-17 is to disseminate the latest research trends in the power sector as well as in energy conversion technologies. Eminent personalities from reputed institutions like Indian Institute of Science (IISc), National Institute of Technology etc will share the latest trends in this domain. A good number of research papers from various technical institutions over India will be presented in the conference.Last date for submitting the full paper is 20th feb.2017
RACE'17 is the second National Conference on Recent Advances in Communication and Electronics organized by the Department of Electronics and Communication Engineering, College of Engineering Trikaripur on 08/03/17 and 09/03/17 sponsored by TEQIP II. The conference is organized in collaboration with International Journal of Engineering Sciences & Research Technology (IJESRT) and the proceedings of the conference will be published in IJESRT journals.
For registration visit: www.race17.in
Conference at AHALIA SCHOOL OF ENGINEERING AND TECHNOLOGY
National Conference on Recent Innovations in Information & Communication Technologies (NCRICT-2017)
This conference intends to provide an ingenious platform for students, researchers, professionals and scientists from academicians, corporate & industry professionals in various disciplines to present the state of the art innovations in Information and Communication Technologies and share the new trends in current research activities and emerging technologies.
RETICS'17 is the second National Conference on Recent Trends In Computer Networks organised by the Department of Computer Science and Engineering and Department of Information Technology of College of Engineering Trikaripur ,Kerala on March 21st and 22nd,2017 sponsored by Technical Education Quality Improvement Programme Phase-II (TEQIP-II).The conference is organized in collaboration with Bonfring and the proceedings of the conference is published with ISBN.The selected papers of the conference will be published in Bonfring International Journals.
For Registration visit www.retics.in
Conference at MUTHOOT INSTITUTE OF TECHNOLOGY & SCIENCE
EPIC17
National conference on EMERGING TRENDS IN POWER, INSTRUMENTATION & CONTROL
Organised by Electrical & Electronics Engineering
Published onJan2017
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
KNOW YOUR COMPANY
"Know your company" organized by SCTCE & TCS at Technopark, TCS premises on 24/01/2017 for final year students. Coordinator Prof. Anoop M S.
Published onJan2017
Seminar at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
One Day Seminar on Random Process
Dept. of Science and Humanities of MBCCET, is organizing a one day seminar on Random Process. The seminar focuses on some applications of Stochastic Processes, targeting faculty who are engaging S4 B. Tech and S1 M. Tech courses under KTU.
The Resource person is Dr. Jayaprasad P.N. (Asst. Professor, Dept. of Mathematics RIT Pampady)
The fee for registration Rs: 200/-
For further details contact:-
Ms. Meera N.
Mob: 919495442720
Ms. Rengitha M. Thomas
Mob: 919447902151
Ms. Manumol P. Jose
Mob: 919495361434
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
FDP on VLSI & MIXED SIGNAL DESIGN
To help to faculties to gain indepth knowledge in VLSI. Content.1.Fundamentals of Analog VLSI.2. Basics of Digital VLSI .3.Concepts of Mixed Signal Design
Seminar at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
One day seminar on Spectroscopy & Optical Fiber System
The Department of Science & Humanities, MBC College of Engineering & Technology, Peermade is organizing a one day seminar on Spectroscopy & Optical Fiber Systemon 24th January 2017. The seminar will be useful to faculty members who are handling chemistry and physics especially in B.Tech and M.Tech of KTU. Resource person for the seminar is Dr. K. Karunakaran Nair. Registration can be made by sending duly filled performa attached here with. The fee for registration is Rs.200/-
For further queries contact:
Ms. Prathibha Philip
Mobile: 9495163793
Email: prathibhaphilip@mbcpeermade.com
Ms. Divyamol V.
Mobile: 9496333627
Email: divyamolv@mbcpeermade.com
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Workshop
Sameeksha, Trainers club of Vidya Academy of Science & Technology is conducting a one day workshop on "ABCD approach in interactive learning" on 21-1-2017, Saturday. . The number of participants is limited to 40.
Work Shop at GOVERNMENT COLLEGE OF ENGINEERING KANNUR
Workshop on Finite Element Analysis using ANSIS
Faculty & Staff Development Training Centre is organising a Workshop on FEM using ANSYS (Mechanical APDL & Workbench) from 23 to 27 January 2017 in the Department of Mechanical Engineering, GCE Kannur. The brochure is attached herewith.
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
FDP on BIG DATA ANALYTICS
The Computer Science & Engineering department is organizing a three day Faculty Development Programme (FDP) on “Big Data Analytics” from 30.01.17 to 01.02.17. The programme will be beneficial to all faculty members from computer related disciplines. Objectives1.Establishing Centre for Excellence for focused applicable research in Big Data. 2. Training of faculty for effective Teaching and Enhancing Institutional and System Management effectiveness.
Content-1.Big Data Landscape.2.Storing and processing Big Data using different techniques. 3. Research applications of Big Data
RECENT TRENDS IN UTILIZATION OF RENEWABLE AND SUSTAINABLE ENERGY IN ENGINEERING APPLICATIONS
The aim of the course is to enlighten teachers and practicing engineers on the recent trends in application of renewable energy resources, such as solar energy, biomass,, tidal energy, wind energy etc. in various engineering applications. The course is also beneficial for research aspirants in the field of renewable and sustainable energy.
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
FDP on "Latest Development in Automobile Technology"
FDP on "Latest Development in Automobile Technology" for Engineering Faculty of VHSE . Directorate , working in "Automotive Technology"
Published onJan2017
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
FDP ON PYTHON PRORRAMMING
FDP help the participants to create and execute Python programs . The presentations are designed to provide knowledge and experience to participants that serve as a foundation for continued learning of presented areas
Seminar at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
TALK ON LIBERATION THROUGH EDUCATION
FISAT is organising an invited talk on "Liberation through Education".
Time: 10.00 A.M.
Venue: Main Seminar Hall, FISAT
Resource Person: Prof. Satish Kailas, IISc, Bangalore
Participants: Faculty members of Engineering Colleges in and around Cochin
Published onJan2017
Work Shop at MES COLLEGE OF ENGINEERING & TECHNOLOGY
STAADAX -2K 17
To highlight the Practical Manual Structural Design Concepts.
To realize every Civil Engineer`s Dream of becoming a Structural Designer
Published onJan2017
Work Shop at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
Machine Learning
Faculty Development Program on Machine Learning focusing on the faculty members handling classes for MCA fourth semester (Regular) and MCA second semester (Lateral) on 12th January 2017
Work Shop at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
Mobile Computing
Faculty Development Programme on "Mobile Computing", focusing on the faculty members handling classes for MCA Regular Fourth Semester / MCA Lateral Second semester, 11th and 12th January 2017
Conference at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
National Conference on Management Innovations; Strategies for Global Business Excellence
The objective of this National Conference is to bring together academicians researchers and practitioners working on different field of management & management students all over the country and abroad
Work Shop at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
FDP on Lab VIEW
T facilitate academicians to understand the importance of Activity based learning using Graphical System Design Software called LabVIEW.
To help the participants to build real-time projects by making productive use of this software
To familiarize with the various control system based applications and to strengthen the research activities
Course Content
LabVIEW basic 1.functionalities
2. A hands -on demo using NI hardware
3. Focus on control system applications
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
FDP on PTC Creo 3.0
Department of Mechanical Engineering, SCTCE and InterCAD Systems Pvt Ltd. Thiruvananthapuram, jointly conducting a two day workshop on PTC Creo 3.0 , from 6/1/2017 to 7/1/2017 at SCT College of Engineering, Pappanamcode; for Faculty members of Engineering Colleges. Sessions will be handled by PTC Experts. Faculty members shall bring their laptops. A maximum of 2 faculty members from an institution.
SEMI-DESTRUCTIVE AND NON-DESTRUCTIVE TESTING OF STRUCTURES
Short Term Training Programme
Published onDec2016
Conference at MAR BASELIOS CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY
Energy Congress 2K17 @ Kuttikkanam
Energy Congress 2K17 @ Kuttikkanam
Energy Congress 2K17 @ Kuttikkanam organized jointly by Energy Conservation Society (ECS) and Mar Baselios Christian College of Engineering & Technology, Kuttikkanam to be held on 6 th , 7 th and 8 th January 2017 at MBC College of Engineering & Technology, Peermade.
The Energy congress 2k17 is expected to bring the pioneer organizations in the field of Energy Conservation and Management under a single umbrella, mainly oriented towards consolidating the idea of 5 th Fuel as Energy Conservation. The conference is all set ready to witness research areas and experiences on recent innovations and ideas in the field of energy
conservation. Experiences of eminent professionals from EMC, NATPAC, ANERT, SEEM, KSEB etc. could be heard personally in their keynotes.
There will be a project presentation competition (Working Model) and also a project idea competition for engineering and polytechnic students based on the theme - Energy Conservation
Hoping to meet you @ Energy Congress 2K17 at Kuttikkanam. Kindly find the brochure attached along with.
Secretary Energy Congress
Prof. Robins Anto
HOD EEE Dept
Ph: +91 9497054956
Work Shop at TOC H INSTITUTE OF SCIENCE & TECHNOLOGY
FDP on FOSS
Main Objective of the FDP is to provide a platform for the participant faculty/technical staff to get an exposure in Free and Open source Software environment and hence enable students to use open source packages for development and research.
Work Shop at SREE CHITRA THIRUNAL COLLEGE OF ENGINEERING
FDP ON FREE & OPEN SOURCE SOFTWARE
The Department of Computer Science and Engineering has been promoting value based quality education in the emerging areas of advanced professional studies in computer science and information technology. The department has close interaction with various leading industries. The department focusses on the development of students by rigorous academic study, excitement of research and imparting industry standard skills. The department is organizing the Faculty Development Program, on FREE AND OPEN SOURCE SOFTWARE, in association with Society for Promotion of Alternative Computing and Employment (SPACE), during 13th to 17th December 2016.
The objective of the programme is to expose the faculty members to FOSS environment and introduce them to use open source packages in open source platforms.
For details, please contact the coordinators, Dr. Soniya B, 9447202200, sonia_balram@yahoo.com, Prof. Kuttymalu V K, 9544452293, kuttymaluvk.sctce@gmail.com.
Conference at MOHANDAS COLLEGE OF ENGINEERING AND TECHNOLOGY
TECHSYNOD'16
Department of Computer Science and Engineering, Master of Computer Applications and Civil engineering is proposing to conduct a three day National Conference for Faculty and students, which is to be held from 19th to 21st December 2016
Title: 3rd National Conference on "Recent Trends in Computer Science and Information Technology and Sustainability in Civil Engineering "
PRAVAH 2K'16 is an intercollegiate Technical Festival of our college to provide a vibrant platform for the students to showcase their technical talents. PRAVAH 2K'16 is to be held on 27th and 28th October 2016.The motto of this event is "Women Empowerment and Engineering".For more details please contact 9747383760 or visit our website www.kmctcew.ac.in
Short Term Training Programme on "�Health Monitoring of RCC/Steel Structures"
The Civil Engineering Department of College of Engineering Trivandrum, Thiruvananthapuram Kerala is organizing a six day short term training programme on "�Health Monitoring of RCC/Steel Structures",sponsored by Directorate of Technical Education, Government of Kerala.
The training programme covers Health monitoring techniques of RCC/Steel structures,NDT methods of damage assessment in structures,Corrosion health monitoring of structures, and Case studies and testing methods.
We request you to kindly circulate this intimation among the faculty of your institution and encourage them to take part in the program.
The schedule of the program is summarized below and the details are provided in the given attachment
Date:�-�21 to �26 November, 2016
Duration: - 6 Days�
The detailed brochure is enclosed here with for your perusal.
Expecting your kind co-operation,
For details contact,
Dr. K.R. Bindhu, P/CE,mob:�+91-9495239156, Mail id: bindhukr@yahoo.co.in
Dr. Yashida Nadir, AP/CE,mob:+91-9446787298, Mail id: yashidanadir@gmail.com
Thanks & Regards
Department of Civil Engineering
College of Engineering Trivandrum,
Thiruvananthapuram
"PRAVAH" is the technical extravaganza of KMCT college of Engineering for Women with the motto of promoting talents and innovations. Pravah negotiates the relation of women empowerment and engineering.
Published onOct2016
Conference at AL-AMEEN COLLEGE, KULAPPULLY, SHORANUR-2
INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT
This conference is organized with the
objective of bringing together Ideas,
Experiences and Research results in the
field of Engineering and Technology for the
sustainable development. It will provide a
common platform for Academicians,
Scientists, Research Scholars and Students.
The conference includes Presentation of
research articles by Authors, Invited Talks
by Eminent Scientists and Academicians,
Panel Discussion etc.
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Faculty Development Programme on " Natural Language Processing and Machine Learning "
A three day Faculty Development Programme on " Natural Language Processing and Machine Learning " on 1st, 5th and 6th September 2016 in association with Institution of Engineers India(IE), Indian Society for Technical Education (ISTE) and Computer Society of India (CSI).
Centre for Continuing Education (CCE) & Department of Computer Science & Engineering, of Amal Jyothi College of Engineering, Kanjirappally in association with ISTE Kerala Section is organizing a Four day workshop "Aspire '16" from 3rd-6th August 2016.
The main focus of this workshop is to train PG students/New Faculty members who are really passionate about teaching & research. This workshop, a Finishing School for Teachers is a 4 day unique programme targeted to enhance creativity, communication and pedagogical skills among teachers/to-be teachers such that they are classroom ready.
Topics to be discussed include
Teaching /Learning Principles
Teacher as Leader and Communicator
Mentoring based on student psychology
Interactive Educational Tools
Technical Paper Writing-Do’s & Don't’s
Relevance of Research in Teaching & Teaching leading to Research
Hands On: How to create effective PowerPoint presentations
How to tune the Mindset of an Entrepreneur
Effective Presentation
Bridging the gap between Industry-Academia
Faculty members and Post Graduate students of Engineering, Arts and Science Colleges can participate in this workshop. The number of seats is limited to 40, so the confirmation will be based on first come first serve manner. Registration is open till 2 Aug 2016.
The registration fee for Students -750/- and for Faculty participants is Rs. 1000/-. For more details please find the information brochure and registration form attached.
Check out more on www.ajce.in/aspire16/
Published onJul2016
Work Shop at AMAL JYOTHI COLLEGE OF ENGINEERING
3 Days Workshop on Multivariable Calculus
Calculus (from Latin calculus, literally "small pebble used for counting") is the mathematical study of change The development of calculus and its applications to physics and engineering is probably the most significant factor in the development of modern science beyond where it was in the days of Archimedes. This was responsible for the industrial revolution and all the developments that have followed from it including almost all the major advances of the last few centuries.
The workshop aims at exploring multivariable calculus including vector calculus and the calculus of complex variables. The program consists of invited lecture sessions. The workshop will cover most of the syllabus of the 1st and 3rd Semester Mathematics papers of the APJ Abdul Kalam Technological University and as such is expected to be a refresher course for faculty handling these papers
Published onJul2016
Seminar at HOLY GRACE ACADEMY OF ENGINEERING
The influence of emerging technologies on Entrepreneurship.
This addresses how one could practice entrepreneurship without the title 'entrepreneur' and manage risks to avoid stigma of failure as new business models evolve rapidly. Broadly discuss how students should form teams to become successful as a group of entrepreneurs in the long run.
Work Shop at AL-AMEEN COLLEGE, KULAPPULLY, SHORANUR-2
START UP i3 INNOVATION PROGRAMME
IEDC IS CONDUCTING A 3 DAYS WORKS SHOP ON ENTREPRENEURSHIP IN ASSOCIATION WITH KERALA START UP MISSION. 53 STUDENTS OF VARIOUS ENGINEERING COLLEGES PARTICIPATING
Published onJul2016
Work Shop at NSS COLLEGE OF ENGINEERING
Code Maestro
Code Maestro is a 6 day summer training camp specially designed for engineering students exploring the recent trends in the digital world including the advances in the android app development and the opportunities in the web development.
CodeMaestro is conducted by Phacsin, a cross platform application development company who have launched many successful products like KEAM SAHAYI. The programme is coordinated by innovation and entrepreneurship development cell NSSCE (iEDC).
Published onJul2016
Work Shop at NSS COLLEGE OF ENGINEERING
Workshop on AUTOELECTRICALS
INNOVATION AND ENTREPRENEURSHIP DEVELOPMENT CELL (iEDC), NSSCE in collaboration with BOSCH is going to organize a two day workshop on AUTOELECTRICALS on 23rd and 24th, July 2016. The workshop will be conducted by BOSCH.
Topics to be covere are
Basics of Auto electrical system, Introduction Working Principle of Starter Alternator and Battery Removal and fitment of Alternator, Starter Motor on vehicle Removal , Charging procedure and f itment of Battery Assembly , Dis-assembly practice of starter Motor Visual Inspection and testing of starter Component Assembly , Dis-assembly practice of Alternator Visual Inspection and testing of Alternator components Testing and inspection of Starter, Alternator on test bench BAT 131 testing on vehicle Battery, Alternator check
Published onJul2016
Work Shop at LBS COLLEGE OF ENGINEERING
LEGO MINDSTORM Training
Hands-on training in assembling and programming using LEGO MINDSTORM robotic kit
Published onAug2016
Conference at MUTHOOT INSTITUTE OF TECHNOLOGY & SCIENCE
National conference on Advanced Research and Innovations
The Department of Civil Engineering of Muthoot Institute of Technology and Science is organizing a one day National Conference on Advanced Research and Innovations in Civil Engineering – ARICE 2016 on 8th September 2016. This conference invites original contributed papers in emerging trends and their challenges in Civil Engineering. We kindly request you to circulate the enclosed brochure among the faculty members / research scholars, UG & PG students of your institution and encourage them to participate in this conference. For more details log on to www.arice2k16.in
Published onJul2016
Work Shop at SARABHAI INSTITUTE OF SCIENCE AND TECHNOLOGY
FOSS Centre & Department of Computer Science & Engineering of Amal Jyothi college of Engineering, Kanjirappally in association with ISTE Kerala Section and CCE (Centre for Continuing Education) - AJCE is organizing a One day workshop "Spoken Tutorial Expertise - An Insight? on 16th July 2016.
The main focus of this program is to introduce the Spoken Tutorial Platform of IIT Bombay for the faculties and to guide them on how to make use of spoken tutorials to popularize software development and training.
Spoken Tutorial (ST) program of IIT Bombay is the Knowledge Partner of APJ Abdul Kalam Technological University, to provide Basic IT and Skill oriented IT/ Software courses to students. This program will be implemented and rolled out in the new Academic Year 2016-2017.
Spoken Tutorial Coordinators from institutions under A P J Abdul Kalam Technological University, Kerala and Lectures from all branches of Engineering, MCA and Arts and Science Colleges in and around Kerala to attend this workshop and get benefited from it.
Manufacturing trend has made a quantum leap towards Computer Numerical Control (CNC) from conventional methods. Industry is in great need of professionals with thorough CNC programming knowledge in India and abroad. For this reason, CNC training centre in Amal Jyothi College of Engineering is offering a high end training program in CNC programming and CNC Machining.
This training program is specifically designed to give first hand exposure and experience for the standards in servicing, repairing and maintenance of heavy vehicles. As the syllabus is designed and approved by VE Commercial Vehicles Ltd. (VECV), It gives a better chance for the students to get placed in industries.
International Conference on Signal, Power, Communication, Security, and Computing Applications
International Conference on Signal, Power, Communication, Security, and Computing Applications (ICSPCSCA-2016) is the 1st international conference organized by Department of Electronics & Instrumentation Engineering, College of Engineering Vadakara is scheduled to be held from 18th to 20th of October 2016 at Vadakara, Calicut. The conference will provide a common platform for researchers and technologists to exchange their technical and experimental ideas in emerging areas in signal processing, communication, power, computation and other fields of technology.
Published onJul2016
Work Shop at PROVIDENCE COLLEGE OF ENGINEERING
Android - for beginners
An introductory 2 day workshop on Android - with micro projects
Work Shop at SAHRDAYA COLLEGE OF ENGINEERING & TECHNOLOGY
Workshop on Electronics Design Automation Lab
The curriculum of third semester of B. Tech in Electronics and Communication Engineering has
EC213 Electronics Design Automation Lab as one of the subjects which is a relatively new course which many members of the faculty may not be familiar with. The Electronics and Communications Engineering department of Sahrdaya College of Engineering & Technology, Kodakara proposes to organize an orientation program in this course from July 12th to 15th 2016.
Workshop on Innovation and Entrepreneurship Development
The Department of Mechanical Engineering, Mangalam College of Engineering, Ettumanoor
(MLM) is organizing a Workshop on Innovation and Entrepreneurship Development on
2 nd July 2016.
The Mechanical Engineering Department of TKM Institute of Technology, Karuvelil, Kollam, Kerala is organizing a Workshop on Product Designing. This workshop is designed especially for the students who have completed first year engineering program of study and will involve drafting, modeling and realization of the idea.
Seminar at MGM COLLEGE OF ENGINEERING AND PHARMACEUTICAL SCIENCES
ENTORNO-16
As a part of world environmental day, the department of civil engineering of our college is conducting a seminar on "SOUL OF EARTH". The program will be inaugurated by Hon. Minister Dr. K.T JALEEL and the Chief Guest of this session will be Mr. Ashok Kumar C V , Govt.Agricultural Officer. The program will be presided over by the Honorable chairman of Cochin Engineering Colleges Mr.T R Shamsudheen
Work Shop at MGM COLLEGE OF ENGINEERING AND PHARMACEUTICAL SCIENCES
FDP ON MICRO TEACHING
This is a programme to develop the micro teaching skills of the teachers that would help the teaching learning process.The programme focuses on (1) enhancing functional area expertise,(2) improving one's classroom delivery both as a teacher and trainer and (3) enhancing abilities for conducting meaningful research.
The content of programme include various Teaching Methods,fundamental Elements of Effective Teaching,Cultivating Innovation and creativity in the class and College,Make Teaching a Fun and innovative teaching and Tools and Techniques for improvement in education quality.
Conference at LOURDES MATHA COLLEGE OF SCIENCE AND TECHNOLOGY
National Conference on Emerging Trends in Engineering and Technology (NCETET’16) on 9th and 10th of
Greetings
Dear Sir/Madam,
We are happy to inform that Lourdes Matha College of Science and Technology is organizing a National Conference on Emerging Trends in Engineering and Technology (NCETET’16) on 9th and 10th of August 2016.
This conference invites original contributed papers in emerging trends in Engineering and Technology. There will be invited talks on advanced topics by eminent experts and practicing professionals during the conference. Authors are requested to send research papers to ncetet16@lmcst.ac.in.
We kindly request you to circulate the enclosed brochure among the faculty members / research scholars, UG & PG students of your institution and encourage them to participate in this conference.
With Regards
Organizing Committee NCETET’16
Mr.Ignatious C.A.,
Convener Organising Committee
(Ph. 9496020065)
Beshiba Wilson, Conf. Secretary
(Ph. 9447729207)
Organising Committee members:
Mr.Jayaram V. ( Ph. 9809816191)
Ms. Minu E. Mathew (Ph. 9447766830)
Ms. Parvathy Harikumar (Ph.9895628366)
The fast paced of electronic devices and circuits have transformed the speed of computation, newer computing architectures and provided foundations for big data infrastructure developments. The semiconductor industry has been following the Moore's law with a great success, however, the
scalability is a challenging issue, with the need to develop new devices and circuits. This
workshop aims to provide foundations to engage in the new age development of devices and
circuits, that would have a major implication in developing future technologies such as neural
system, artificial brain architectures and massive internet computing.
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
NBA Workshop (Series 1)
Vidya Academy of Science and Technology is proud to organise a one day Workshop on NBA. The workshop covers NBA Overview, Programme Curriculum, Teaching Learning Process, Course Outcomes, Programme Outcomes and Workshop on preparation of Course Outcomes.
Date: 18th June 2016
Time: 9:30 am - 4:15 pm
Venue: Main Seminar Hall, VAST Thrissur
Work Shop at RAJADHANI INSTITUTE OF ENGINEERING AND TECHNOLOGY
Apple iOS App Development Training 20th June to 28th June 2016.
Short Summer Course 2016 at Rajadhani Institute of Engineering and Technology help you in developing user-friendly, highly precise, and interactive apps based on the unique needs of the customers. With ample amount of experience in developing applications for iPhones / iPads, the trained students who complete our course will be a promising asset to any company which hires them.
Work Shop at RAJAGIRI SCHOOL OF ENGINEERING & TECHNOLOGY
Workshop on "The Role of Accreditation in Higher Educational Institutions"
Rajagiri School of Engg organises a National workshop on "The Role of Accreditation in Higher Educational Institutions" from June 30 to 1st July 2016. The programme shall be inaugurated by
Dr. M.Abdul Rahman, PVC, KTU
The speakers for the workshop are:
1. Dr. Vengal Gopal Reddy- Role of accreditation
2. Prof. SC Shasrabudhe -Former Director (IIT B) Importance of Audit in accreditation
3. Dr. G. Rmachandran, Academci Audit, KTU, Importance of Audit in Higher Education.
4. Dr. C.V. R Murty, Director IIT J
Work Shop at JAWAHARLAL COLLEGE OF ENGINEERING AND TECHNOLOGY
Advanced Electronic Technologies
The recent advances in electronic technologies is driving the development of host of applications in every area of human activity ? from house hold products to space mission. The new technologies viz. nanotechnology, advanced optical communication advanced electronic
fabrication technologies had profound effect on development of powerful processors and controllers that can replace many of the human
brain functions. New algorithms and software developments with powerful hardware is changing the face of the globe. In order to catch up with these technologies as envisaged by A P J Abdul Kalam Technological university in their syllabus for all engineering colleges of Kerala, JCET is organizing this workshop for the faculty to get exposed to these new areas thereby students will be benefitted. The resource
persons for the workshop are drawn from various prestigious institutions and have lot of expertise in their respective fields.
Work Shop at RAJADHANI INSTITUTE OF ENGINEERING AND TECHNOLOGY
Faculty Development Programme 30th May to 3rd June 2016
Rajadhani Institute of Engineering and Technology and Rajadhani Business School jointly proudly arrange a National Level Faculty Development Programme on "Teaching, Assessment, Research and Consultancy in Engineering and Management Education".
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
5 day FDP on Sensors & IoT based Embedded Systems
Vidya Academy of Science and Technology is proud to organise a 5 day FDP on Sensors & IoT based Embedded Systems from June 27th - 1st July 2016.The objective of this FDP is to introduce to the world of bio-sensors & applications in embedded systems using IoT. The sessions will be handled by various professors from IIT Madras, IIT Bhubaneswar, PSG College of Technology, Amrita School of Engineering Ettimadai & CDAC (TVM).
Registeration Link - https://form.jotform.me/CRSGROUP/FDPonSensorsandIoT
Work Shop at FEDERAL INSTITUTE OF SCIENCE AND TECHNOLOGY (FISAT)
3 day Faculty Development Programme from 08/06/2016 to 10/06/2016
The Department of Mechanical Engineering at Federal Institute of Science and Technology (FISAT) is proud to organize a 3 Day Staff Development Programme on "Research Opportunities and Challenges in Advanced Materials and Manufacturing" in association with The Institution of Engineers India, Kochi from June 8 - 10, 2016...
The resource faculty are drawn from IITs, NITs and
other premier research institutions. This Staff Development
Programme is being organised to benefit faculties,
practicing engineers and students interested to take up
research assignments in the field of material science and
manufacturing.
The proposed Staff development programme envisages on
channelizing the potential of young researchers and their
supervisors to concentrate on research and development
of advanced materials and their manufacturing...
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Course on Numerical Methods in Science and Engineering
Vidya Academy of Science and Technology is proud to organise an FDP on Numerical Methods in Science and Engineering by Dr Gangan Prathap from 17th to 21st May of 2016. The objective of this FDP is to introduce the application of Numerical methods in various aspects of Science and Engineering.
Conference at GOVERNMENT COLLEGE OF ENGINEERING KANNUR
ICSEE 2016
The objective of ICSEE 2016 to be held on 5th and 6th of August 2016 is to provide a common platform for engineers, researchers and technologists to exchange technical, scientific and experimental ideas for sustainable development at the global level.
Work Shop at VIDYA ACADEMY OF SCIENCE AND TECHNOLOGY
Outcome Based Accreditation (New NBA 2015 Format-Tier II) for undergraduate Engineering Programme
VIDYA ACADEMY OF SCIENCE & TECHNOLOGY, Thalakkotukara, is organizing a two day National Workshop on ?Outcome Based Accreditation (New NBA 2015 Format-Tier II) for undergraduate Engineering Programme? on 12th and 13th May, 2016.
Last date for Registration is 10th May 2016. Online Registration link http://goo.gl/forms/h5bU2B4cYw
Seminar at MENTOR ACADEMY FOR DESIGN ENTREPRENEURSHIP INNOVATION AND TECHNOLOGY
Dr. APJ Abdul Kalam Startup award 2016 and Industry Interconnect Programme
In remembrance and tribute to honorable Dr. APJ Abdul Kalam?s ever memorable visit to our campus, the last of his south Indian College diaries, Cochin Institute Science And Technology in association with IEDC (Innovation and Entrepreneur Development Cell of CISAT) is organizing ?Dr. APJ Abdul Kalam Startup award 2016 and Industry Interconnect Programme? On 6th and 7th May 2016, 10.00 am at our college campus.
Published onMay2016
Work Shop at COLLEGE OF ENGINEERING TRIVANDRUM
National Technology Day
As part of celebrating the National Technology Day, a hands-on training on making LED lamps is planned.
Published onMay2016
Conference at GOVERNMENT COLLEGE OF ENGINEERING KANNUR
INTERNATIONAL CONFERENCE ON SYSTEMS, ENERGY AND ENVIRONMENT ICSEE 2016
The objective of ICSEE 2016 is to provide a common platform for engineers, researchers and technologists to exchange technical, scientific and experimental ideas for sustainable development at the global level.
Published onApr2016
Work Shop at CHRIST KNOWLEDGE CITY
Intra College Exhibition on Design and Engineering
Intra College Exhibition on Design and Engineering will be held at Christ Knowledge City on May 3 2016
Published onApr2016
Conference at VIMALJYOTHI ENGINEERING COLLEGE
INNOVATIONS IN CIVIL ENGINEERING
National conference on “Innovations in Civil Engineering”provides a national platform for graduate students, post-graduate students, industry professional research scholars etc. to deliberate, explore and contribute their
research findings and to discuss the latest developments in the field of Civil Engineering.Selected papers will be published in reputed journals.
Published onApr2016
Conference at COLLEGE OF ENGINEERING, THALASSERY
National Conference on Signal Processing & Communication Engineering (NACOSPACE'16)
The Conference will be held at Department of ECE, College of Engineering, Thalassery. www.nacospace.in
The Innovation and Entrepreneurship Development Centre (IEDC) And Product Development Centre (PDC) of Mangalam college of Engineering jointly organize workshopon a topic “ Share Market & Online Trading” on 20th April 2016, 1.30pm-4.00pm at Digital theatre.